Citation Impact
Citing Papers
Bone Histomorphometry : Standardization of Nomenclature, Symbols, and Units
1987 Standout
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
2016
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Microspherical Na2Ti3O7 prepared by spray-drying method as anode material for sodium-ion battery
2013
Aqueous rechargeable zinc/sodium vanadate batteries with enhanced performance from simultaneous insertion of dual carriers
2018 Standout
Nanocrystalline TiO2(B) as Anode Material for Sodium-Ion Batteries
2014
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
2017
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Microstructural evolution and mechanical property of Ti-6Al-4V wall deposited by continuous plasma arc additive manufacturing without post heat treatment
2016
High‐Capacity Anode Materials for Sodium‐Ion Batteries
2014
Ultrafast X-ray imaging of laser–metal additive manufacturing processes
2018
The role of graphene for electrochemical energy storage
2014 Standout
Peritectic titanium alloys for 3D printing
2018
Designing the next generation of proton-exchange membrane fuel cells
2021 StandoutNature
Three-dimensional methods for quantification of cancellous bone architecture
1997
In vivo corrosion of four magnesium alloys and the associated bone response
2004 Standout
Nanocrystalline anatase TiO2: a new anode material for rechargeable sodium ion batteries
2013
Advanced structural ceramics in aerospace propulsion
2016 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Unbiased estimation of vertebral trabecular connectivity in calcium-restricted ovariectomized minipigs
1995
The serum protein α2–Heremans-Schmid glycoprotein/fetuin-A is a systemically acting inhibitor of ectopic calcification
2003 Standout
Grain structure control during metal 3D printing by high-intensity ultrasound
2020
Leptin Inhibits Bone Formation through a Hypothalamic Relay
2000 Standout
3D printing of high-strength aluminium alloys
2017 StandoutNature
Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions
1993
Additive manufacturing of metallic components by selective electron beam melting — a review
2016
Critical Review—Identifying Critical Gaps for Polymer Electrolyte Water Electrolysis Development
2017
A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
2019
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
2018
Additive manufacturing of Inconel 718—Copper alloy bimetallic structure using laser engineered net shaping (LENS™)
2018
Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical properties
2019
Physics of thin-film ferroelectric oxides
2005 Standout
Coarsening in Sintering: Grain Shape Distribution, Grain Size Distribution, and Grain Growth Kinetics in Solid-Pore Systems
2010
Laser based additive manufacturing in industry and academia
2017
Layer-wise spatial modeling of porosity in additive manufacturing
2018
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
2018 Standout
Review: liquid phase sintering
2008 Standout
Recent Advances on High‐Entropy Alloys for 3D Printing
2020
Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling
2018
Mechanical and Corrosion Properties of Additively Manufactured CoCrFeMnNi High Entropy Alloy
2019
Metal Additive Manufacturing: A Review of Mechanical Properties
2016
An electrochemical investigation of rutile TiO2 microspheres anchored by nanoneedle clusters for sodium storage
2015
Advances in Medical Applications of Additive Manufacturing
2020
A review of gas diffusion layers for proton exchange membrane fuel cells—With a focus on characteristics, characterization techniques, materials and designs
2019
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
2017
Numerical simulation of grain growth in liquid phase sintered material-II. Study of isotropic grain growth
1998
Multiprocess 3D printing for increasing component functionality
2016 Science
Modeling grain growth dependence on the liquid content in liquid-phase-sintered materials
1998
An improved prediction of residual stresses and distortion in additive manufacturing
2016
Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
2019
Automated dihedral angle measurement in liquid phase sintered alloys
2004
Prediction of microstructure in laser powder bed fusion process
2016
Critical instability at moving keyhole tip generates porosity in laser melting
2020 Science
Bone histomorphometry: Standardization of nomenclature, symbols, and units: Report of the asbmr histomorphometry nomenclature committee
1987 Standout
Electrochemical and Chemical Properties of Na2NiO2 as a Cathode Additive for a Rechargeable Sodium Battery
2015 StandoutNobel
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Synchrotron Radiation Microtomography Allows the Analysis of Three-Dimensional Microarchitecture and Degree of Mineralization of Human Iliac Crest Biopsy Specimens: Effects of Etidronate Treatment
2002
Standardized nomenclature, symbols, and units for bone histomorphometry: A 2012 update of the report of the ASBMR Histomorphometry Nomenclature Committee
2012 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Formation of metastable cellular microstructures in selective laser melted alloys
2016
Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625
2016
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
2016
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
2018
Stereology of arbitrary particles. A review of unbiased number and size estimators and the presentation of some new ones, in memory of William R. Thompson.
1986 Standout
A model for elastic precursor waves in the shock loading of polycrystalline metals
1977
A review of mechanical properties of additively manufactured Inconel 718
2019
Microstructure quantification procedures in liquid-phase sintered materials
1999
The direct examination of three-dimensional bone architecture in vitro by computed tomography
1989
Architected Cellular Materials
2016
Lrp6 Hypomorphic Mutation Affects Bone Mass Through Bone Resorption in Mice and Impairs Interaction With Mesd
2008 StandoutNobel
Effect of cyclic rapid thermal loadings on the microstructural evolution of a CrMnFeCoNi high-entropy alloy manufactured by selective laser melting
2020
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Graphene‐Rich Wrapped Petal‐Like Rutile TiO2 tuned by Carbon Dots for High‐Performance Sodium Storage
2016
Recent advances in solid oxide cell technology for electrolysis
2020 StandoutScience
Cross‐Linked Chitosan as a Polymer Network Binder for an Antimony Anode in Sodium‐Ion Batteries
2016 StandoutNobel
Influence of particle size distribution on coarsening
1992
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
New materials based on a layered sodium titanate for dual electrochemical Na and Li intercalation systems
2013
Normalised model-based processing diagrams for additive layer manufacture of engineering alloys
2016
Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
2020
Microstructural Control of Additively Manufactured Metallic Materials
2016
Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage
2018 Standout
Dihedral angle measurement in microgravity liquid phase sintered microstructures
2003
Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM
2016
Additive manufacturing for steels: a review
2018
Amorphous TiO2 inverse opal anode for high-rate sodium ion batteries
2016
The effects of Hot Isostatic Pressing on parts fabricated by binder jetting additive manufacturing
2018
Powder bed binder jet 3D printing of Inconel 718: Densification, microstructural evolution and challenges☆
2017
Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy
2020
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Joining of Inconel 718 and 316 Stainless Steel using electron beam melting additive manufacturing technology
2016
Microstructure of the epitaxial film of anatase nanotubes obtained at high voltage and the mechanism of its electrochemical reaction with sodium
2014
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Thin liquid/gas diffusion layers for high-efficiency hydrogen production from water splitting
2016
Volumetric additive manufacturing via tomographic reconstruction
2019 StandoutScience
A review of powder additive manufacturing processes for metallic biomaterials
2017
Promise and reality of post-lithium-ion batteries with high energy densities
2016 Standout
Materials for additive manufacturing
2017
Critical influences of particle size and adhesion on the powder layer uniformity in metal additive manufacturing
2018
A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs
2018
Nanostructured Ti-based anode materials for Na-ion batteries
2016
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Metallurgy, mechanistic models and machine learning in metal printing
2020
In situ observation of particle motion and diffusion interactions during coarsening
1987
Recent Advances in Electrocatalytic Hydrogen Evolution Using Nanoparticles
2019 Standout
Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks
2016
Fiber‐in‐Tube Design of Co9S8‐Carbon/Co9S8: Enabling Efficient Sodium Storage
2019 StandoutNobel
In-situ two-phase flow investigation of different porous transport layer for a polymer electrolyte membrane (PEM) electrolyzer with neutron spectroscopy
2018
Unfolding the Mechanism of Sodium Insertion in Anatase TiO2 Nanoparticles
2014
Interfacial shear strength estimates of NiTi–Al matrix composites fabricated via ultrasonic additive manufacturing
2015
Guidelines for assessment of bone microstructure in rodents using micro–computed tomography
2010 Standout
Numerical simulation of grain growth in liquid phase sintered materials-I. Model
1998
Sodium-ion batteries: present and future
2017 Standout
Ion-Catalyzed Synthesis of Microporous Hard Carbon Embedded with Expanded Nanographite for Enhanced Lithium/Sodium Storage
2016 StandoutNobel
Overview of Materials Qualification Needs for Metal Additive Manufacturing
2016
A β-Arrestin–Biased Agonist of the Parathyroid Hormone Receptor (PTH1R) Promotes Bone Formation Independent of G Protein Activation
2009 StandoutNobel
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
2016
Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
2018
Characterizing surface finish and fatigue behavior in binder-jet 3D-printed nickel-based superalloy 625
2018
Shape distortion in liquid-phase-sintered tungsten heavy alloys
1998
Research Development on Sodium-Ion Batteries
2014 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
2014
A digital twin for rapid qualification of 3D printed metallic components
2018
Design of nitrogen doped graphene grafted TiO2 hollow nanostructures with enhanced sodium storage performance
2014
Grain growth behavior of tungsten heavy alloys based on the master sintering curve concept
2006
Carbon Electrodes for K-Ion Batteries
2015 Standout
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
2017 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Anatase TiO2nanocubes for fast and durable sodium ion battery anodes
2015
State of the Art and Emerging Trends in Additive Manufacturing: From Multi-Material processes to 3D printed Electronics
2018
Stereology of arbitrary particles*
1986 Standout
Stochastic Virtual Tests for High-Temperature Ceramic Matrix Composites
2014
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
2017
Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling
2016
Powder-spreading mechanisms in powder-bed-based additive manufacturing: Experiments and computational modeling
2019
Mechanistic models for additive manufacturing of metallic components
2020
Extraordinary Performance of Carbon‐Coated Anatase TiO2 as Sodium‐Ion Anode
2015
Anatase TiO2 nanoparticles for high power sodium-ion anodes
2013
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
2015 StandoutScience
A lightweight electromagnetic actuator for high voltage DC power grids
2019
Multifunctional metal matrix composites with embedded printed electrical materials fabricated by ultrasonic additive manufacturing
2017
Electrochemical sodium storage of TiO2(B) nanotubes for sodium ion batteries
2013
Microstructural instability in single-crystal thin films
1996
Additive manufacturing of metals
2016 Standout
Recent Development on Anodes for Na‐Ion Batteries
2015
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
2016
Lowering the Temperature of Solid Oxide Fuel Cells
2011 StandoutScience
Self‐Supported Nanotube Arrays of Sulfur‐Doped TiO2 Enabling Ultrastable and Robust Sodium Storage
2016
Works of Ryan Dehoff being referenced
Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
2014
Use of the disector to estimate the Euler characteristic of three dimensional microstructures
1987
Microstructural Characterization of Bonding Interfaces in Aluminum 3003 Blocks Fabricated by Ultrasonic Additive Manufacturing
2010
Out of Bounds Additive Manufacturing
2013
Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing
2016
Additive manufacturing of materials: Opportunities and challenges
2015
Thermographic in-situ process monitoring of the electron-beam melting technology used in additive manufacturing
2013
Estimation of the size distribution of triaxial ellipsoidal particles from the distribution of linear intercepts
1970
Characterization of topology optimized Ti-6Al-4V components using electron beam powder bed fusion
2017
Estimation of dihedral angles from stereological counting measurements
1986
Case Study: Additive Manufacturing of Aerospace Brackets
2013
Scale factor coarsening
1984
Evaluation of an Al-Ce alloy for laser additive manufacturing
2016
Evaluation of the relationship between cathode microstructure and electrochemical behavior for SOFCs
2009
Self-organized amorphous TiO2 nanotube arrays on porous Ti foam for rechargeable lithium and sodium ion batteries
2012
Feedstock powder processing research needs for additive manufacturing development
2018
Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting
2015
Mechanism of steady-state grain growth in aluminum
1974
Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process
2016
Properties of Inconel 625 mesh structures grown by electron beam additive manufacturing
2014
Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing
2016
A geometrically general theory of diffusion controlled coarsening
1991
Additive manufacturing of liquid/gas diffusion layers for low-cost and high-efficiency hydrogen production
2016
Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
2018
Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
2017
Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
2016
Experimental determination of the topological properties of three‐dimensional microstructures
1972
Fatigue crack growth mechanisms at the microstructure scale in as-fabricated and heat treated Ti-6Al-4V ELI manufactured by electron beam melting (EBM)
2017
Solidification and solid-state transformation sciences in metals additive manufacturing
2017
Microstructural Evaluation of LENS™ Deposited Nb-Ti-Si-Cr Alloys
2002
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
2015
Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting
2016
Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
2017
Mechanical Characterization of an Additively Manufactured Inconel 718 Theta-Shaped Specimen
2015
Localized melt-scan strategy for site specific control of grain size and primary dendrite arm spacing in electron beam additive manufacturing
2017
The spherical image concept applied to grain structures
1994
Generalized microstructural evolution by interface controlled coarsening
1984
Characterization of interfacial microstructures in 3003 aluminum alloy blocks fabricated by ultrasonic additive manufacturing
2010
Powder bed charging during electron-beam additive manufacturing
2016
Computational modeling of residual stress formation during the electron beam melting process for Inconel 718
2015
Thermal grooving, thermotransport and electrotransport in doped and undoped thin gold films
1981
Site specific control of crystallographic grain orientation through electron beam additive manufacturing
2014
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718
2014
Neutron Characterization for Additive Manufacturing
2013
Quantitative serial sectioning analysis: preview
1983
Effects of the microstructure and porosity on properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
2016