Citation Impact
Citing Papers
Nanoparticles: Properties, applications and toxicities
2017 Standout
A review of roll-to-roll nanoimprint lithography
2014
Low-threshold amplified spontaneous emission and lasing from colloidal nanocrystals of caesium lead halide perovskites
2015 Standout
Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication
2012
Nanomoulding with amorphous metals
2009 StandoutNature
Heterogeneous Catalysis through Microcontact Printing
2008 StandoutNobel
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
2010 Standout
Transparent micro‐ and nanopatterned poly(lactic acid) for biomedical applications
2005
Patterning surfaces with functional polymers
2008
Engineering atomic and molecular nanostructures at surfaces
2005 StandoutNature
Advances in top–down and bottom–up surface nanofabrication: Techniques, applications & future prospects
2011
Label Free Colorimetric Biosensing Using Nanoparticles
2004
Direct patterning of nanoparticles and biomolecules by liquid nanodispensing
2015 StandoutNobel
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
Mass producible and biocompatible microneedle patch and functional verification of its usefulness for transdermal drug delivery
2009
High‐Contrast Photopatterning of Photoluminescence within Quantum Dot Films through Degradation of a Charge‐Transfer Quencher
2012 StandoutNobel
Processing of Bulk Metallic Glass
2009 Standout
Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres
2016
Soft lithography for micro- and nanoscale patterning
2010 Standout
Emerging methods for fabricating functional structures by patterning and assembling engineered nanocrystals
2010
Microneedles for drug and vaccine delivery
2012 Standout
An Effective Lift‐Off Method for Patterning High‐Density Gold Interconnects on an Elastomeric Substrate
2010
Strong coupling between surface plasmon polaritons and emitters: a review
2014 Standout
Gecko‐Inspired Surfaces: A Path to Strong and Reversible Dry Adhesives
2010
Self-assembly of 1-D organic semiconductor nanostructures
2007 StandoutNobel
What do we need for a superhydrophobic surface? A review on the recent progress in the preparation of superhydrophobic surfaces
2007 Standout
Local mass transport and its effect on global pattern replication during hot embossing
2003
Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis
2016 Standout
Colloidal Inorganic Nanocrystal Based Nanocomposites: Functional Materials for Micro and Nanofabrication
2010
One-Dimensional Nanostructures of π-Conjugated Molecular Systems: Assembly, Properties, and Applications from Photovoltaics, Sensors, and Nanophotonics to Nanoelectronics
2010
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
2005 Standout
Two-photon direct laser writing of ultracompact multi-lens objectives
2016 Standout
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
2005 Standout
Nanoimprint lithography: challenges and prospects
2001
Imprint Materials for Nanoscale Devices
2005
Nanoimprint Lithography: Methods and Material Requirements
2007 Standout
Room-temperature imprint lithography by solvent vapor treatment
2000
Supramolecular Chirality in Self-Assembled Systems
2015 Standout
Low-Pressure Nanoimprint Lithography
2004
UV-LIGA microfabrication of 220 GHz sheet beam amplifier gratings with SU-8 photoresists
2010
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
Transparent Triboelectric Nanogenerators and Self-Powered Pressure Sensors Based on Micropatterned Plastic Films
2012 Standout
Pattern Transfer using Step&Stamp Imprint Lithography
2003
Molecular-Scale Electronics: From Concept to Function
2016 Standout
Vacuum Electronic High Power Terahertz Sources
2011 Standout
Fluorescence microscopy for quality control in nanoimprint lithography
2003
Transport phenomena in nanofluidics
2008 Standout
Jet printing of convex and concave polymer micro-lenses
2015
Noble Metals on the Nanoscale: Optical and Photothermal Properties and Some Applications in Imaging, Sensing, Biology, and Medicine
2008 Standout
Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals
2014 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Scanning Probe Lithography Using Self-Assembled Monolayers
2003
Heterogeneous Catalysis of a Copper-Coated Atomic Force Microscopy Tip for Direct-Write Click Chemistry
2009 StandoutNobel
Superhydrophobic and superoleophobic properties in nature
2015 Standout
Nanopatterned Electrically Conductive Films of Semiconductor Nanocrystals
2012 StandoutNobel
Nanostructured Plasmonic Sensors
2008 Standout
Controlling the Synthesis and Assembly of Silver Nanostructures for Plasmonic Applications
2011 Standout
High-resolution organic polymer light-emitting pixels fabricated by imprinting technique
2002
Molecular-Level Control of Feature Separation in One-Dimensional Nanostructure Assemblies Formed by Biomolecular Nanolithography
2004
Tetrapodal Molecular Switches and Motors: Synthesis and Photochemistry
2014 StandoutNobel
UNCONVENTIONAL NANOFABRICATION
2004
Patterning of controllable surface wettability for printing techniques
2013
Design of Ice-free Nanostructured Surfaces Based on Repulsion of Impacting Water Droplets
2010 Standout
Soft Robotic Grippers
2018 Standout
Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications
2016 Standout
Review on micro molding of thermoplastic polymers
2003 Standout
A contribution to the flow behaviour of thin polymer films during hot embossing lithography
2001
SU-8: a photoresist for high-aspect-ratio and 3D submicron lithography
2007
Nanostructures in Biodiagnostics
2005 Standout
<title>Nanoimprint lithography with a commercial 4-in. bond system for hot embossing</title>
2001
Recent progress in nanoimprint technology and its applications
2004
Micro- and Nanopatterning Techniques for Organic Electronic and Optoelectronic Systems
2007
Review of polymer MEMS micromachining
2015
Low Thresholds in Polymer Lasers on Conductive Substrates by Distributed Feedback Nanoimprinting: Progress Toward Electrically Pumped Plastic Lasers
2008 Nobel
Duo-mold imprinting of three-dimensional polymeric structures
2004
Low-temperature solution-processed wavelength-tunable perovskites for lasing
2014 Standout
Advanced Polymers and Resists-A Key to the Development of Nanoimprint Lithography
2005
Dependence of the Threshold Energy of Femtosecond Laser Ejection of Gold Nanoprisms from Quartz Substrates on the Nanoparticle Environment
2007
Materials and Mechanics for Stretchable Electronics
2010 StandoutScience
Emerging Droplet Microfluidics
2017 Standout
A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles
2012 Standout
Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction
2010 Standout
One-step lithography for various size patterns with a hybrid mask-mold
2004
Photopatternable Quantum Dots Forming Quasi-Ordered Arrays
2010
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
2014 Standout
25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress
2013 Standout
Works of G. Gruetzner being referenced
New inks for the direct drop-on-demand fabrication of polymer lenses
2010
Directly fabricated multi-scale microlens arrays on a hydrophobic flat surface by a simple ink-jet printing technique
2012
Three-dimensional polymer structures fabricated by reversal ultraviolet-curing imprint lithography
2005
Effective baking of thick and ultra-thick photoresist layers by infrared radiation
2003
Nanoimprint lithography: an alternative nanofabrication approach
2003
An Epoxy Photoresist Modified by Luminescent Nanocrystals for the Fabrication of 3D High‐Aspect‐Ratio Microstructures
2007
A comparison of thermally and photochemically cross-linked polymers for nanoimprinting
2003
Polymer stamps for nanoimprinting
2002
Improved properties of epoxy nanocomposites for specific applications in the field of MEMS/NEMS
2007
<title>Step and stamp imprint lithography using a commercial flip chip bonder</title>
2000
Novel linear and crosslinking polymers for nanoimprinting with high etch resistance
2000
Investigations of SU-8 removal from metallic high aspect ratio microstructures with a novel plasma technique
2008
Submicron three-dimensional structures fabricated by reverse contact UV nanoimprint lithography
2006
mr-NIL 6000LT – Epoxy-based curing resist for combined thermal and UV nanoimprint lithography below 50 °C
2008
Spontaneous emission control of colloidal nanocrystals using nanoimprinted photonic crystals
2007
SU-8 based deep x-ray lithography/LIGA
2003
<title>Mix and match of nanoimprint and UV lithography</title>
2001
Reduction of internal stress in a SU-8-like negative tone photoresist for MEMS applications by chemical modification
2001
SU-8: promising resist for advanced direct LIGA applications for high aspect ratio mechanical microparts
2006
Multistep profiles by mix and match of nanoimprint and UV lithography
2001
Two-dimensional polymer photonic crystal band-edge lasers fabricated by nanoimprint lithography
2007
Wall profile of thick photoresist generated via contact printing
1999
Photoluminescence enhancement in metallic nanocomposite printable polymer
2007
Low-temperature wafer-scale warm embossing for mix and match with UV lithography
2002
Suitability of new polymer materials with adjustable glass temperature for nano-imprinting
1999