Citation Impact
Citing Papers
Mechanical properties of graphene and graphene-based nanocomposites
2017 Standout
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Femtosecond laser micromachining in transparent materials
2008 Standout
Transparent and flexible fingerprint sensor array with multiplexed detection of tactile pressure and skin temperature
2018 Standout
Grain structure control during metal 3D printing by high-intensity ultrasound
2020
Zeolitic imidazolate framework-coupled resonators for enhanced gas detection
2013 StandoutNobel
Initial temporal and spatial changes of the refractive index induced by focused femtosecond pulsed laser irradiation inside a glass
2005
The atomistic modeling of wave propagation in nanocrystals
2005
Failure wave effects in hypervelocity penetration
1999
A highly stretchable and sensitive strain sensor based on graphene–elastomer composites with a novel double-interconnected network
2016
The spall strength of condensed matter
1988
Self-Limiting Hardness Changes in Laser Peened 6061-T6 Aluminium
2001
A study of fragmentation in the ballistic impact of ceramics
1994
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
2000 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Response of thermites to dynamic high pressure and shear
2000
A phenomenological model for failure waves in glass
2000
Ultra-sensitive strain sensors based on piezoresistive nanographene films
2012
Computational modelling of impact damage in brittle materials
1996 Standout
Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles
2008 Standout
Target strength of ceramic materials for high-velocity penetration
1990
The construction and calibration of an inexpensive PVDF stress gauge for fast pressure measurements
1995
A radiant heating method for performing high-temperature high-strain-rate tests
1998
Review of experimental techniques for high rate deformation and shock studies
2004 Standout
Smoothed Particle Hydrodynamics (SPH): an Overview and Recent Developments
2010 Standout
Stretchable and Soft Electronics using Liquid Metals
2017 Standout
The fracture of glass under high-pressure impulsive loading
1991
Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain Sensors
2013
Shock-wave compression of brittle solids
1998
Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare
2016 Standout
Effect of pulse duration and strain rate on incipient spall fracture in copper
1999
Stretchable, Skin‐Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
2016 Standout
A technique for measuring the dynamic behavior of materials at high temperatures
1998
Linking of Lagrangian particle methods to standard finite element methods for high velocity impact computations
1994
Measurement of dynamic large-strain deformation maps using an automated fine grid technique
1999
Possible detection of failure wave velocity using hypervelocity penetration experiments
1999
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
2002 Standout
Cracking particles: a simplified meshfree method for arbitrary evolving cracks
2004 Standout
Deformation and fracture behavior of laser processed dense and porous Ti6Al4V alloy under static and dynamic loading
2012
The Deviatoric Response of Three Dense Glasses under Shock Loading Conditions
2002
Dynamic unloading behavior of soda lime glass
1989
On the strength of shocked glasses
1999
Micromechanical model for comminution and granular flow of brittle material under high strain rate application to penetration of ceramic targets
1993
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
The relation between ballastic efficiency and compressive strength of ceramic tiles
1988
UNIAXIAL COMPRESSION OF ALUMINA : STRUCTURE, MICROSTRUCTURE AND STRAIN RATE
1991
Adaptive FEM computation of geometric and material nonlinearities with application to brittle failure
1998
Mechanisms of Pulsed Laser Ablation of Biological Tissues
2003 Standout
Heterogeneous deformation and spall of an extruded tungsten alloy: plate impact experiments and crystal plasticity modeling
2007
Thermally Activated Delayed Fluorescence Materials Towards the Breakthrough of Organoelectronics
2014 Standout
Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles – Calculations
2008
Applying Tate's model for the interaction of long rod projectiles with ceramic targets
1990
Review of graphene-based strain sensors
2013
Meshless methods: An overview and recent developments
1996 Standout
Works of Z. Rosenberg being referenced
The Plate Impact Response Of Three Glasses
1970
The effect of microstructural variations upon the dynamic compressive and tensile strengths of aluminas
1994
DYNAMIC RESPONSE AND MICROSTRUCTURE OF COMMERCIAL ALUMINA
1985
Determination of dynamic release curves of manganin stress gauges from their resistive hysteresis
1986
Determination of changes in the sound velocity in shock loaded Ti-6Al-4V with in-material manganin gauges
1983
Shear strength measurements in a tungsten alloy during shock loading
1999
High-speed photography of compressive failure waves in glasses
1995
On the correlation between dynamic compressive strengths of strong ceramics and their indentation hardness
1996
On the relation between the Hugoniot elastic limit and the yield strength of brittle materials
1993
Penetration of 7075-T651 aluminum targets with ogival-nose rods
1992
BRITTLE FAILURE OF CERAMIC RODS UNDER DYNAMIC COMPRESSION
1988
ELASTIC PRECURSOR DECAY IN CERAMICS AS DETERMINED WITH MANGANIN STRESS GAUGES
1988
SPALL STRENGTH AND FAILURE WAVES IN GLASS
1991
On the origin of failure waves in glass
1997
On the correlation between the ballistic behavior and dynamic properties of titanium-alloy plates
1997
Symmetrical Taylor impact of glass bars
1998
The dynamic response of soda-lime glass
1996
Precursor decay in several aluminas
1996
Determination of the dynamic response of AD-85 alumina with in-material Manganin gauges
1985
On the shock induced failure of brittle solids
1998
The dynamic compressive strength of aluminas
1998
The shock wave response of a filled glass
1996
Hypervelocity penetration of tungsten alloy rods into ceramic tiles: experiments and 2-D simulations
1997
A high-speed photographic study of fracture wave propagation in glasses
1994
Shear strength of shock-loaded alumina as determined with longitudinal and transverse manganin gauges
1987
Hypervelocity penetration of ceramics
1987
A new technique for heating specimens in split-Hopkinson-bar experiments using induction-coil heaters
1986
Failure in a shocked high-density glass
1996
The use of in-material stress gauges for estimating the dynamic yield strength of shock-loaded solids
1984
The ramping of shock waves in three glasses
1996
Design and construction of the UK plate impact facility
1995
Spall strength of shock-loaded glass
1985
Study of spall and recompaction of ceramics using a double-impact technique
1985
Calibration of foil-like manganin gauges in planar shock wave experiments
1980
On the analysis of transverse stress gauge data from shock loading experiments
1996
Dynamic uniaxial stress experiments on alumina with in-material Manganin gauges
1985
Decay of elastic waves in alumina
2000
Failure Waves in Glass
1992
On the hydrodynamic theory of long-rod penetration
1990
The influence of the elasto-plastic properties of piezoresistance gauges on their loading-unloading characteristics as lateral shock stress transducers
1995
Lateral stress measurement in shock-loaded targets with transverse piezoresistance gauges
1985
Impact-induced failure waves in glass bars and plates
1991
Perforation of Aluminum Plates With Conical-Nosed Rods
1987
Applying Steinberg’s model to the Hugoniot elastic limit of porous boron carbide specimens
1991
Spall studies on Ti6Al4V
1987
Dynamic high-pressure properties of AlN ceramic as determined by flyer plate impact
1991
On the influence of the loss of shear strength on the ballistic performance of brittle solids
1990
Direct measurements of strain in shock-loaded glass specimens
1996
One-dimensional isentropic compression measurements of multiply loaded polymethylmethacrylate
1982
Perforation of Aluminum Plates with Conical-Nosed Rods—Additional Data and Discussion
1988