Citation Impact
Citing Papers
Atomic Tuning in Electrically Conducting Bimetallic Organic Frameworks for Controllable Electromagnetic Wave Absorption
2023 StandoutNobel
Composition Optimization and Microstructure Design in MOFs-Derived Magnetic Carbon-Based Microwave Absorbers: A Review
2021
Magnetic porous N-doped carbon composites with adjusted composition and porous microstructure for lightweight microwave absorbers
2020
Microenvironmental modulation breaks intrinsic pH limitations of nanozymes to boost their activities
2024 StandoutNobel
MOF-Derived Ni1−xCox@Carbon with Tunable Nano–Microstructure as Lightweight and Highly Efficient Electromagnetic Wave Absorber
2020
In situ EXAFS studies of copper on ZrO2 during catalytic hydrogenation of CO2
2005
Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes
2013 Standout
Recent advances in catalytic hydrogenation of carbon dioxide
2011 Standout
Low-Temperature Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing
2002
Development of Severe Torsion Straining Process for Rapid Continuous Grain Refinement
2004
Achieving Superplasticity of Al-1%Mg-0.2%Sc Alloy in Plate Samples Processed by Equal-channel Angular Pressing
2004
An Evaluation of Superplastic Anisotropy after Processing by Equal-Channel Angular Pressing
2004
Microstructures and Mechanical Properties of Equal Channel Angular Pressed 5083 Al Alloy
2001
Knowledge-based development of a nitrate-free synthesis route for Cu/ZnO methanol synthesis catalysts via formate precursors
2011
Molecular-channel driven actuator with considerations for multiple configurations and color switching
2018 Standout
State of the Art and Prospects in Metal-Organic Framework-Derived Microwave Absorption Materials
2022
A Review on Metal–Organic Framework-Derived Porous Carbon-Based Novel Microwave Absorption Materials
2021
Recent Advances in CO2 Capture and Utilization
2008
Enhanced peroxidase-like activity of MoS2/graphene oxide hybrid with light irradiation for glucose detection
2015
Size-Dependent Oxidation-Induced Phase Engineering for MOFs Derivatives Via Spatial Confinement Strategy Toward Enhanced Microwave Absorption
2022
Antibiotic resistance in the environment
2021 Standout
The path towards sustainable energy
2016 StandoutNobel
Occurrence and fate of emerging contaminants in municipal wastewater treatment plants from different geographical regions-a review
2017 Standout
Ternary Composite of Hemin, Gold Nanoparticles and Graphene for Highly Efficient Decomposition of Hydrogen Peroxide
2013
Photocatalytic Reduction of CO2 on TiO2 and Other Semiconductors
2013 Standout
Carbon Dioxide Capture: Prospects for New Materials
2010 Standout
Recycling of carbon dioxide to methanol and derived products – closing the loop
2014 Nobel
Hollow Engineering to Co@N‐Doped Carbon Nanocages via Synergistic Protecting‐Etching Strategy for Ultrahigh Microwave Absorption
2021
Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size
1996
Diverse Metal–Organic Framework Architectures for Electromagnetic Absorbers and Shielding
2021
Humidity Responsive Asymmetric Free-Standing Multilayered Film
2010
Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis
2016 Standout
An investigation of microstructure and grain-boundary evolution during ECA pressing of pure aluminum
2002
Controlling the textures of the metal strips via the continuous confined strip shearing(C2S2) process
2001
Developing superplasticity in a spray-cast aluminum 7034 alloy through equal-channel angular pressing
2003
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Strengthening of Sheath-Rolled Aluminum Based MMC by the ARB Process
1999
Tuning Selectivity of CO2 Hydrogenation Reactions at the Metal/Oxide Interface
2017 Standout
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Achieving a Superplastic Forming Capability through Severe Plastic Deformation
2003
Optimization of strength and ductility of 2024 Al by equal channel angular pressing (ECAP) and post-ECAP aging
2003
The production and application of metal matrix composite materials
2000 Standout
Effect of interfacial reaction on tensile and creep behaviors of aluminum-borate-whisker-reinforced AA6061 composite
2000
Characterization and performance of Cu/ZnO/Al2O3 catalysts prepared via decomposition of M(Cu, Zn)-ammonia complexes under sub-atmospheric pressure for methanol synthesis from H2 and CO2
2011
Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al–Mg alloys
2002
Highly effective synthesis of ethanol by CO2-hydrogenation on well balanced multi-functional FT-type composite catalysts
1999
Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing
2008
Photochemical Reduction of Low Concentrations of CO2 in a Porous Coordination Polymer with a Ruthenium(II)–CO Complex
2016 StandoutNobel
Status and perspectives of CO2 conversion into fuels and chemicals by catalytic, photocatalytic and electrocatalytic processes
2013 Standout
Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion
2005
Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion
2008
A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures—I. The basic model
1997
Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing
2002
Microstructures and properties of nanocomposites obtained through SPTS consolidation of powders
1998
Active Sites and Structure–Activity Relationships of Copper-Based Catalysts for Carbon Dioxide Hydrogenation to Methanol
2012
Development of highly selective PdZn/CeO2 and Ca-doped PdZn/CeO2 catalysts for methanol synthesis from CO2 hydrogenation
2018
Conversion of Biomass into Chemicals over Metal Catalysts
2013 Standout
Glycine–nitrate combustion synthesis of CuO–ZnO–ZrO2 catalysts for methanol synthesis from CO2 hydrogenation
2010
Optimizing the procedure of equal-channel angular pressing for maximum superplasticity
2001
Mechanical properties of nanocrystalline materials
2005 Standout
Grain refinement and superplasticity in a magnesium alloy processed by equal-channel angular pressing
2005
Effect of texture evolution on tensile properties of Al–Ni eutectic alloy fabricated by equal channel angular pressing
2005
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
Superplastic forming at high strain rates after severe plastic deformation
2000
CO2 hydrogenation to methanol over CuO-ZnO-ZrO2 catalyst prepared by polymeric precursor method
2019
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
The application of equal-channel angular pressing to an aluminum single crystal
2004
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions
1999
Catalytic activation of CO2: Use of secondary CO2 for the production of synthesis gas and for methanol synthesis over copper-based zirconia-containing catalysts
2009
Copper Nanocrystals Encapsulated in Zr-based Metal–Organic Frameworks for Highly Selective CO2 Hydrogenation to Methanol
2016 StandoutNobel
Effect of Annealing on Thermal Stability, Precipitate Evolution, and Mechanical Properties of Cryorolled Al 7075 Alloy
2011
The influence of La doping on the catalytic behavior of Cu/ZrO2 for methanol synthesis from CO2 hydrogenation
2011
Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP
2001
Bimetallic Pd–Cu catalysts for selective CO2 hydrogenation to methanol
2015
OBSERVATIONS OF HIGH STRAIN RATE SUPERPLASTICITY IN COMMERCIAL ALUMINUM ALLOYS WITH ULTRAFINE GRAIN SIZES
1997
Severe plastic deformation as a processing tool for developing superplastic metals
2004
Sustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energy
2010 Standout
Liquid-phase synthesis of methanol from CO2/H2 over ultrafine CuB catalysts
2001
High strain rate superplasticity in an Al-Mg alloy containing scandium
1998
Review Processing and mechanical properties of fine-grained magnesium alloys
1999
The shearing characteristics associated with equal-channel angular pressing
1998
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Biomass-based chemical looping technologies: the good, the bad and the future
2017 Standout
The effect of ageing time on co-precipitated Cu/ZnO/ZrO2 catalysts used in methanol synthesis from CO2 and H2
2007
Structure and deformaton behaviour of Armco iron subjected to severe plastic deformation
1996
Recent Advances in Carbon Dioxide Hydrogenation to Methanol via Heterogeneous Catalysis
2020 Standout
An investigation of microstructural evolution during equal-channel angular pressing
1997
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
2019 StandoutNobel
An investigation of grain boundaries in submicrometer-grained Al-Mg solid solution alloys using high-resolution electron microscopy
1996
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
2013
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
2017 Standout
Microstructure and mechanical properties of PM 2024Al-3Fe-5Ni alloy consolidated by a new process, equal channel angular pressing
1997
Effect of Mg and Mn oxide additions on structural and adsorptive properties of Cu/ZnO/ZrO2 catalysts for the methanol synthesis from CO2
2003
Developing superplastic properties in an aluminum alloy through severe plastic deformation
1999
The evolution of homogeneity in processing by high-pressure torsion
2006
Nanocrystalline zirconia as catalyst support in methanol synthesis
2004
Unveiling the active sites on ferrihydrite with apparent catalase-like activity for potentiating radiotherapy
2021
Core-shell FeCo@carbon nanoparticles encapsulated in polydopamine-derived carbon nanocages for efficient microwave absorption
2019
Identifying creep mechanisms in plastic flow
2005
Catalytic reduction of CO2 by H2 for synthesis of CO, methanol and hydrocarbons: challenges and opportunities
2015 Standout
Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks
2011 Standout
Catalytic activity of the M/(3ZnO·ZrO2) system (M = Cu, Ag, Au) in the hydrogenation of CO2 to methanol
2004
Effects of mesoporous silica supports and alkaline promoters on activity of Pd catalysts in CO2 hydrogenation for methanol synthesis
2012
Influence of Equal-Channel Angular Pressing on the Superplastic Properties of Commercial Aluminum Alloys
1999
Microstructure transformation from lamellar to equiaxed microduplex through equal-channel angular pressing in an Al-33 pct Cu eutectic alloy
2004
Low voltage anode materials for lithium-ion batteries
2017
Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)
2018 Standout
Observations of grain boundary structure in submicrometer-grained Cu and Ni using high-resolution electron microscopy
1998
An Evaluation of Superplasticity in Aluminum-Scandium Alloys Processed by Equal-Channel Angular Pressing
1999
Carbon Dioxide Hydrogenation To Form Methanol via a Reverse-Water-Gas-Shift Reaction (the CAMERE Process)
1999
Equal-channel angular pressing: A novel tool for microstructural control
1998
Structural evolution and the Hall-Petch relationship in an AlMgLiZr alloy with ultra-fine grain size
1997
Microstructural characteristics of an ultrafine grain metal processed with equal-channel angular pressing
1996
Enhanced grain growth in an Al-Mg alloy with ultrafine grain size
1996
High peroxidase catalytic activity of exfoliated few-layer graphene
2013
CO2 hydrogenation over metal/zirconia catalysts
1999
Low temperature superplasticity in an AZ91 magnesium alloy processed by ECAE
1997
Mechanical behavior and microstructure of a thermally stable bulk nanostructured Al alloy
2001
Friction stir welding and processing
2005 Standout
Environmental Implications of Hydroxyl Radicals (•OH)
2015 Standout
Challenges in the Greener Production of Formates/Formic Acid, Methanol, and DME by Heterogeneously Catalyzed CO2Hydrogenation Processes
2017 Standout
Processing by equal-channel angular pressing: Applications to grain boundary engineering
2005
Low-temperature superplasticity in a Cu–Zn–Sn alloy processed by severe plastic deformation
2001
Recent Advances in Catalysts for Methanol Synthesis via Hydrogenation of CO and CO2
2003
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP
2003
Microstructural evolution, microhardness and thermal stability of HPT-processed Cu
2000
Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy
2004
The processing of ultrafine-grained materials through the application of severe plastic deformation
2007
Tunable copper-catalyzed chemoselective hydrogenolysis of biomass-derived γ-valerolactone into 1,4-pentanediol or 2-methyltetrahydrofuran
2012
A DFT Study of Methanol Synthesis from CO2 Hydrogenation on the Pd(111) Surface
2018
Texture evolution of the strip cast 1050 Al alloy processed by continuous confined strip shearing and its formability evaluation
2002
Influence of ZrO2 Structure and Copper Electronic State on Activity of Cu/ZrO2 Catalysts in Methanol Synthesis from CO2
2014
CO2 hydrogenation to methanol over CuO ZnO TiO2ZrO2 catalyst prepared by a facile solid-state route: The significant influence of assistant complexing agents
2019
Microstructural changes in equal channel angular pressed low carbon steel by static annealing
2000
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Enhanced ductility in coarse-grained Al-Mg alloys
1996
An investigation of microstructural stability in an AlMg alloy with submicrometer grain size
1996
The changing nature of the active site of Cu-Zn-Zr catalysts for the CO2 hydrogenation reaction to methanol
2014
Rotary-die equal-channel angular pressing of an Al – 7 mass% Si – 0.35 mass% Mg alloy
2001
Catalysis for CO2 conversion: a key technology for rapid introduction of renewable energy in the value chain of chemical industries
2013 Standout
Age hardening and the potential for superplasticity in a fine-grained Al-Mg-Li-Zr alloy
1998
Fabrication of bulk ultrafine-grained materials through intense plastic straining
1998
Influence of rare-earth elements (La, Ce, Nd and Pr) on the performance of Cu/Zn/Zr catalyst for CH3OH synthesis from CO2
2014
Hybrid battery/supercapacitor energy storage system for the electric vehicles
2017 Standout
Effect of magnetic field on CO2 conversion over Cu-ZnO/ZrO2 catalyst in hydrogenation reaction
2016
Hydrogenation of CO 2 to CH 3 OH over Cu/ZnO catalysts with different ZnO morphology
2015
Steady state creep deformation behaviour of SiC particle reinforced 2618 aluminium alloy based composites
1999
Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation
2004
Cocatalysts for Selective Photoreduction of CO2into Solar Fuels
2019 Standout
Work-softening behavior of the ultrafine-grained Al alloy processed by high-strain-rate, dissimilar-channel angular pressing
2003
The microstructural characteristics of ultrafine-grained nickel
2004
Microstructural characteristics and superplastic-like behavior in aluminum powder alloy consolidated by equal-channel angular pressing
2000
Carbon dioxide hydrogenation to methanol over Cu/ZrO2/CNTs: effect of carbon surface chemistry
2015
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Combustion synthesis of CuO–ZnO–ZrO2 catalysts for the hydrogenation of carbon dioxide to methanol
2009
CO2 hydrogenation to methanol over Cu/ZnO/ZrO2 catalysts prepared via a route of solid-state reaction
2011
Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion
2008
Improvement of high-cycle fatigue life in a 6061 Al alloy produced by equal channel angular pressing
2002
Principle of equal-channel angular pressing for the processing of ultra-fine grained materials
1996 Standout
An investigation of cavity growth in a superplastic aluminum alloy processed by ECAP
2005
Effect of TiO2, ZrO2, and TiO2–ZrO2 on the performance of CuO–ZnO catalyst for CO2 hydrogenation to methanol
2015
Factors influencing the flow and hardness of materials with ultrafine grain sizes
1998
Supertough wear-resistant coatings with ‘chameleon’ surface adaptation
2000
Ultrahigh Density of Atomic CoFe-Electron Synergy in Noncontinuous Carbon Matrix for Highly Efficient Magnetic Wave Adsorption
2022
Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy
2003
Deformation behaviour of ultra-fine-grained copper
1994
Tropospheric Aqueous-Phase Chemistry: Kinetics, Mechanisms, and Its Coupling to a Changing Gas Phase
2015
CO2 capture by solid adsorbents and their applications: current status and new trends
2010 Standout
The process of grain refinement in equal-channel angular pressing
1998
Stepwise tuning of metal-oxide and acid sites of CuZnZr-MFI hybrid catalysts for the direct DME synthesis by CO2 hydrogenation
2015
Deformation of electrodeposited nanocrystalline nickel
2003 Standout
Grain refinement of pure nickel using equal-channel angular pressing
2002
Thermal stability and microstructural evolution in ultrafine-grained nickel after equal-channel angular pressing (ECAP)
2002
CO2 photo-reduction: insights into CO2 activation and reaction on surfaces of photocatalysts
2016 Standout
Achieving High Strength and High Ductility in Precipitation‐Hardened Alloys
2005
Principles of superplasticity in ultrafine-grained materials
2007
Development of the ECAP with a rotary die and its application to AC4C aluminum alloy.
2000
CO2 Hydrogenation to Methanol over ZrO2-Containing Catalysts: Insights into ZrO2 Induced Synergy
2019
Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing
1998
Processing by Severe Plastic Deformation: Historical Developments and Current Impact
2010
Review: Processing of metals by equal-channel angular pressing
2001
Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion
2005
Effect of metal oxide additives on the activity and stability of Cu/ZnO/ZrO2 catalysts in the synthesis of methanol from CO2 and H2
2006
Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process
1999 Standout
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
2004
Structural and mechanical properties of nanocrystalleve titanium processed by severe plastic deformation
1997
The evolution of homogeneity and grain refinement during equal-channel angular pressing: A model for grain refinement in ECAP
2005
Highly selective hydrogenation of CO2 to methanol over CuO–ZnO–ZrO2 catalysts prepared by a surfactant-assisted co-precipitation method
2014
Strengthening and grain refinement in an Al-6061 metal matrix composite through intense plastic straining
1998
Low temperature superplasticity of AZ91 magnesium alloy with non-equilibrium grain boundaries
1999
Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
2009
The Active Site of Methanol Synthesis over Cu/ZnO/Al 2 O 3 Industrial Catalysts
2012 StandoutScience
Works of Yan Ma being referenced
The microstructure of ferrihydrite and its catalytic reactivity
2010
MOFs-Derived Hollow Co/C Microspheres with Enhanced Microwave Absorption Performance
2018
New insight on kinetics of catalytic decomposition of hydrogen peroxide on ferrihydrite: Based on the preparation procedures of ferrihydrite
2011
An investigation of ductility and microstructural evolution in an Al−3% Mg alloy with submicron grain size
1993
Yield stress measurements on an Al-1.5% Mg alloy with submicron grain size using a miniature bending procedure
1995
Microstructural characteristics and superplastic ductility in a Zn-22% Al alloy with submicrometer grain size
1998
An examination of the implications of void growth in submicrometer and nanocrystalline structures
1993
Complexation of iron by salicylic acid and its effect on atrazine photodegradation in aqueous solution
2010
Al-3%Mg alloy with submicron particle size.Production method and structure.
1993
Factors Influencing the Exceptional Ductility of a Superplastic Pb-62 pct Sn alloy
1994
An investigation of strain hardening and creep in an AI-6061/AI2O3 metal matrix composite
1995
The characteristics of cavitation in superplastic metals and ceramics
1996
Significance of Microstructural Control for Superplastic Deformation and Forming
1996
Novel Thrombo-Resistant Coating Based on Iron−Polysaccharide Complex Multilayers
2008
A practical approach for the preparation of high activity Cu/ZnO/ZrO2 catalyst for methanol synthesis from CO2 hydrogenation
1998
SnO2/Sn Nanoparticles Embedded in an Ordered, Porous Carbon Framework for High‐Performance Lithium‐Ion Battery Anodes
2016
A gel-oxalate co-precipitation process for preparation of Cu/ZnO/Al2O3 ultrafine catalyst for methanol synthesis from CO2+H2: (II) effect of various calcination conditions
1999