Citation Impact
Citing Papers
Metal additive manufacturing in aerospace: A review
2021 Standout
An effective rule for translating optimal selective laser melting processing parameters from one material to another
2020
Additive manufacturing: technology, applications and research needs
2013 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Lasers and materials in selective laser sintering
2003
Effect of delay time on part strength in selective laser sintering
2008
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
2010 Standout
Direct metal laser fabrication: machine development and experimental work
2009
Temperature measurements during selective laser sintering of titanium powder
2004
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
2018 Standout
A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting
2012
A Review of Additive Manufacturing
2012 Standout
Shape retention and infiltration height in complex WC-Co parts made via binder jet of WC with subsequent Co melt infiltration
2019
Sintering of commercially pure titanium powder with a Nd:YAG laser source
2003
Prediction of microstructure in laser powder bed fusion process
2016
RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES
2003 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Review of selective laser melting: Materials and applications
2015 Standout
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
2015 Standout
Laser absorption behavior of randomly packed powder-bed during selective laser melting of SiC and TiB2 reinforced Al matrix composites
2019
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique — Optimization of process parameters
2014
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
2016
Phase change materials, their synthesis and application in textiles—a review
2019 Standout
Model of Radiation and Heat Transfer in Laser-Powder Interaction Zone at Selective Laser Melting
2009
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
2014 Standout
Influence of Nd:YAG Parameters on the Selective Laser Sintering of Metallic Powders
2001
3D non-isothermal phase-field simulation of microstructure evolution during selective laser sintering
2019
Influence of process parameters on part shrinkage in SLS
2006
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment
2013
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Influence of phosphorus element on direct laser sintering of multicomponent Cu-based metal powder
2006
Residual stresses in selective laser sintering and selective laser melting
2006 Standout
Microstructural characterization and wear behavior of (Fe,Ni)–TiC MMC prepared by DMLS
2005
Parametric analysis of the selective laser melting process
2007 Standout
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Modelling of radiation transfer in metallic powders at laser treatment
2005
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Influence of size and volume fraction of SiC particulates on properties of ex situ reinforced Al–4.5Cu–3Mg metal matrix composite prepared by direct metal laser sintering process
2010
Simulation of Laser Beam Melting of Steel Powders using the Three-Dimensional Volume of Fluid Method
2013
Laser sintering of polyamides and other polymers
2011 Standout
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
2015
Individualized production by means of high power Selective Laser Melting
2010
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
2007 Standout
Infiltration studies of additive manufacture of WC with Co using binder jetting and pressureless melt method
2019
Selective laser melting W–10 wt.% Cu composite powders
2009
Computer Aided Optimisation of the Thermal Management During Laser Beam Melting Process
2014
Melt-processable acrylonitrile–methyl acrylate copolymers and melt-spun fibers containing MicroPCMs
2009
3D printing of ceramics: A review
2018 Standout
Direct Laser Sintering of Al 2 O 3 –SiO 2 Dental Ceramic Components by Layer‐Wise Slurry Deposition
2006
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Additive manufacturing methods and modelling approaches: a critical review
2015 Standout
Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
2015
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
2017
Mechanistic models for additive manufacturing of metallic components
2020
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Influence of tribology on global energy consumption, costs and emissions
2017 Standout
Material issues in additive manufacturing: A review
2016
Binder jet printed WC infiltrated with pre-made melt of WC and Co
2019
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Additive manufacturing of metals
2016 Standout
Works of XC Wang being referenced
Laser penetration in a powder bed during selective laser sintering of metal powders: simulations versus experiments
2000
Energy absorption and penetration in selective laser sintering: a ray tracing model
2000
Finite element analysis of thermal process in direct selective laser sintering
2001
Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation
2002
Lasers and materials in selective laser sintering
2001
Fabrication and properties of polypropylene sheath/core thermo-regulated fibres
2004