Citation Impact
Citing Papers
PEEK biomaterials in trauma, orthopedic, and spinal implants
2007 Standout
High-Tc superconducting materials for electric power applications
2001 StandoutNature
Application of the combined neuro-computing, fuzzy logic and swarm intelligence for optimization of compocast nanocomposites
2014
Sol–gel coated B 4 C particles reinforced 2024 Al matrix composites
2011
Enhanced supercurrent density in polycrystalline YBa2Cu3O7-δ at 77 K from calcium doping of grain boundaries
2000 Nature
Processing, Fracture Toughness, and Vickers Hardness of Allylhydridopolycarbosilane‐Derived Silicon Carbide
2003
Future on Power Electronics for Wind Turbine Systems
2013 Standout
Imaging with terahertz radiation
2007 Standout
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
A comparative study on abrasive wear behavior of semisolid–liquid processed Al–Si matrix reinforced with coated B4C reinforcement
2012
Powder Processing Science and Technology for Increased Reliability
1989 Standout
The surface and materials science of tin oxide
2005 Standout
Efficient optimum solution for high strength Al alloys matrix composites
2013
Texture evolution in equal-channel angular extrusion
2009
Measurement of spatio-temporal terahertz field distribution by using chirped pulse technology
2000
Grain boundaries in high-T c
2002
Electroplasticity in metals and ceramics
2000 Standout
High‐Temperature Creep and Cavitation of Polycrystalline Aluminum Nitride
1990
Brittle‐to‐Ductile Transition in Silicon Carbide
1989
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes
1997 StandoutScience
Strain hardening due to deformation twinning in α-titanium: Mechanisms
2006
Magneto-optical study of flux penetration and critical current densities in [001] tiltYBa 2 Cu 3 O 7 − δ
1996
A comparison of buffer layer architectures on continuously processed YBCO coated conductors based on the IBAD YSZ process
2001
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Hardening evolution of AZ31B Mg sheet
2006 Standout
Nonlinear current flow in superconductors with restricted geometries
2001
Review of experimental techniques for high rate deformation and shock studies
2004 Standout
Elastic-plastic crystal mechanics for low symmetry crystals
1995
The synthesis of the particulates Al matrix composites by the compocasting method
2012
Nonlinear transport current flow in superconductors with planar obstacles
2000
Superconducting quantum interference devices: State of the art and applications
2004 StandoutNobel
Nucieation and Growth of Cracks in Vitreous‐Bonded Aluminum Oxide at Elevated Temperatures
1986
High-transition-temperature superconducting quantum interference devices
1999 StandoutNobel
Microstructural and mechanical characterization of an equiatomic YGdTbDyHo high entropy alloy with hexagonal close-packed structure
2018
Refined microstructure of compo cast nanocomposites: the performance of combined neuro-computing, fuzzy logic and particle swarm techniques
2014
Swelling of Hot‐Pressed A1 2 O 3
1985
Unconventional Methods for Fabricating and Patterning Nanostructures
1999 Standout
Current transport through low-angle grain boundaries in high-temperature superconductors
1998
Plastic deformation kinetics of fine-grained alumina
1999
One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications
2003 Standout
Unambiguous orientation in short fiber composites over small sampling area in a center-gated disk
2011
Perspectives on Titanium Science and Technology
2013 Standout
Highly oriented carbon fiber–polymer composites via additive manufacturing
2014 Standout
Sensitivity of deformation twinning to grain size in titanium and magnesium
2011
Substrate selection for high-temperature superconducting thin films
1996
Chemistry and Physics in One Dimension: Synthesis and Properties of Nanowires and Nanotubes
1999 Standout
Texture formation and grain boundary networks in rolling assisted biaxially textured substrates and in epitaxial YBCO films on such substrates
1999
Handbook of SiC properties for fuel performance modeling
2007 Standout
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
The Mechanical Properties at High Temperatures of SiC Whisker-Reinforced Alumina
1988
Atmospheric Effects on Compressive Creep of SiC‐Whisker‐Reinforced Alumina
1991 StandoutNobel
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
2004 Standout
Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
2015 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Improved strong magnetic field performance of low angle grain boundaries of calcium and oxygen overdoped YBa2Cu3Ox
2000
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Texture modification, grain refinement and improved hardness/corrosion balance of a FeAl alloy by pulsed electron beam surface treatment in the “heating mode”
2008 Standout
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
2010 Standout
Strain hardening due to deformation twinning in α-titanium: Constitutive relations and crystal-plasticity modeling
2005
The brass-type texture and its deviation from the copper-type texture
2008
Microstructures and textures of pure magnesium deformed in plane-strain compression
2004
Behaviour of ammonium perchlorate–based propellants and a polymer–bonded explosive under impact loading
2004
High-entropy alloys
2019 Standout
Low angle grain boundary transport in YBa2Cu3O7−δ coated conductors
2000
10 MW Class Superconductor Wind Turbine Generators
2011
Texture and anisotropy
2004
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Hopkinson bar experimental technique: A critical review
2004 Standout
Study of slip mechanisms in a magnesium alloy by neutron diffraction and modeling
2003
Suppression of Segregation, Settling and Agglomeration in Mechanically Processed Composites Fabricated by a Semisolid Agitation Processes
2012
Uniform Silver Nanowires Synthesis by Reducing AgNO3 with Ethylene Glycol in the Presence of Seeds and Poly(Vinyl Pyrrolidone)
2002 Standout
Application of electron beam curing for silicon carbide fiber synthesis from blend polymer of polycarbosilane and polyvinylsilane
2001
Kinetics and mechanisms of high-temperature creep in polycrystalline aluminum nitride
1993 StandoutNobel
Mechanical properties of ABS resin reinforced with recycled CFRP
2007
Nanorod-Superconductor Composites: A Pathway to Materials with High Critical Current Densities
1996 Science
Works of W.R. Blumenthal being referenced
Determination of Non-Symmetric 3-D Fiber-Orientation Distribution and Average Fiber Length in Short-Fiber Composites
1997
Influence of Temperature and Strain Rate on the Mechanical Behavior of Adiprene L-100
1997
The tensile strength of short fibre-reinforced composites
1997
Influence of strain rate on mechanical properties and deformation texture of hot-pressed and rolled beryllium
2010
Development of crystallographic texture during high rate deformation of rolled and hot-pressed beryllium
2005
Properties of YBa2Cu3O7−δ thick films on flexible buffered metallic substrates
1995
Response of aluminium-infiltrated boron carbide cermets to shock wave loading
1994
Mechanical processing of highjcbscco superconductors
1992
Characterization of Nicalon fibres with varying diameters: Part I Strength and fracture studies
1998
High‐Temperature Failure of Polycrystalline Alumina: II, Creep Crack Growth and Blunting
1984
The Relation between Texture, Twinning and Mechanical Properties in Hexagonal Aggregates
2002
Overview 14 Creep fracture in ceramic polycrystals—I. creep cavitation effects in polycrystalline alumina
1981
Determining the constitutive response of polymeric materials as a function of temperature and strain rate
2003
The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning
2005