Citation Impact
Citing Papers
Gas tungsten arc welding assisted hybrid friction stir welding of dissimilar materials Al6061-T6 aluminum alloy and STS304 stainless steel
2011
Proliferation and osteogenic differentiation of rat BMSCs on a novel Ti/SiC metal matrix nanocomposite modified by friction stir processing
2016
Joint properties of dissimilar Al6061-T6 aluminum alloy/Ti–6%Al–4%V titanium alloy by gas tungsten arc welding assisted hybrid friction stir welding
2013
Dissimilar Welding of Al and Mg Alloys by FSW
2008
Fabrication of Recycled Carbon Fiber Reinforced Magnesium Alloy Composite by Friction Stir Processing Using 3-Flat Pin Tool and Its Fatigue Properties
2018
Targeting microbial biofilms: current and prospective therapeutic strategies
2017 Standout
Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers
2014 Standout
A multi-structural and multi-functional integrated fog collection system in cactus
2012 Standout
Cancer nanomedicine: progress, challenges and opportunities
2016 Standout
Stabilizing triplet excited states for ultralong organic phosphorescence
2015 Standout
Screening and Surveillance for the Early Detection of Colorectal Cancer and Adenomatous Polyps, 2008: A Joint Guideline From the American Cancer Society, the US Multi-Society Task Force on Colorectal Cancer, and the American College of Radiology
2008 Standout
Erectile Dysfunction
2000 Standout
Gas detection by structural variations of fluorescent guest molecules in a flexible porous coordination polymer
2011 StandoutNobel
Charge and Spin Transport in an Organic Molecular Square
2015 StandoutNobel
Super-resolution microscopy demystified
2018 Standout
Heterogeneity of lineage involvement by trisomy 8 in myelodysplastic syndrome
1995
Molecular cytogenetic abnormalities in multiple myeloma and plasma cell leukemia measured using comparative genomic hybridization
1997
J‐Aggregates: From Serendipitous Discovery to Supramolecular Engineering of Functional Dye Materials
2011 Standout
Imaging chromatin nanostructure with binding-activated localization microscopy based on DNA structure fluctuations
2017
Direct patterning of nanoparticles and biomolecules by liquid nanodispensing
2015 StandoutNobel
Where bio meets nano: The many uses for nanoporous aluminum oxide in biotechnology
2011
A New Strategy for the Design of Water‐Soluble Synthetic Receptors: Specific Recognition of DNA Intercalators and Diamines.
2003 StandoutNobel
Colorectal cancer screening: prospects for molecular stool analysis
2005
Male breast cancer
2006 Standout
Pituitary adenoma and bilateral male breast cancer: An unusual association
1997
Systemic amyloidosis
2015 Standout
Nano-chemistry and scanning probe nanolithographies
2005
Applications of viral nanoparticles in medicine
2011
Processing of Bulk Metallic Glass
2009 Standout
An engineered anisotropic nanofilm with unidirectional wetting properties
2010
Gated Electron Sharing Within Dynamic Naphthalene Diimide‐Based Oligorotaxanes
2014 StandoutNobel
Stool screening for colorectal cancer: Molecular approaches
2005
Cancer as an evolutionary and ecological process
2006 Standout
Nanolithography and Nanochemistry: Probe‐Related Patterning Techniques and Chemical Modification for Nanometer‐Sized Devices
2004
Electron Delocalization in a Rigid Cofacial Naphthalene‐1,8:4,5‐bis(dicarboximide) Dimer
2014 StandoutNobel
FLUORESCENCE IN SITU HYBRIDIZATION ON NUCLEI FROM PARAFFIN-EMBEDDED TISSUE IN LOW STAGE PURE EMBRYONAL CARCINOMA OF THE TESTIS
1998
Effect of friction stir welding on microstructure and mechanical properties of dissimilar Al 5083-H321 and 316L stainless steel alloy joints
2016
Dissimilar butt friction stir welding of Al 5083-H321 and 316L stainless steel alloys
2016
Advances in Microfluidic Materials, Functions, Integration, and Applications
2013
Thermal maps of gases in heterogeneous reactions
2013 StandoutNatureNobel
Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper
2005
Texture Analyses of Ti/Al2O3 Nanocomposite Produced Using Friction Stir Processing
2016
Friction stir welded structural materials: beyond Al-alloys
2011
A review of friction stir welding of steels: Tool, material flow, microstructure, and properties
2017
Microstructural aspects in Al–Cu dissimilar joining by FSW
2015
Bacterial Retention on Superhydrophobic Titanium Surfaces Fabricated by Femtosecond Laser Ablation
2011
Space-Resolved Profiling Relevant in Heterogeneous Catalysis
2009
Microstructure and tensile strength of friction stir welded joints between interstitial free steel and commercially pure aluminium
2013
Effect of pre-hole offset on the property of the joint during laser-assisted friction stir welding of dissimilar metals steel and aluminum alloys
2015
Microstructure Evolution during Friction Stir Welding of Mill-Annealed Ti-6Al-4V
2010
Joining of advanced high-strength steel to AA 6061 alloy by using Fe/Al structural transition joint
2014
The Effect of Friction Stir Processing on the Mechanical Properties of Investment Cast and Hot Isostatically Pressed Ti-6Al-4V
2010
Influence of heat input on post weld microstructure and mechanical properties of friction stir welded HSLA-65 steel
2012
Recent Developments in Friction Stir Welding of Al-alloys
2014
Dissimilar friction stir spot welding of low carbon steel and Al–Mg alloy by formation of IMCs
2009
Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding
2013
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
2005 Standout
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
2005 Standout
Analysis of Weak Zones in Friction Stir Welded Magnesium Alloys from the Viewpoint of Local Texture: A Short Review
2018
Dissimilar Friction Stir Welding of Carbon Steel and Stainless Steel: Some Observation on Microstructural Evolution and Stress Corrosion Cracking Performance
2018
The stir zone microstructure and its formation mechanism in Ti–6Al–4V friction stir welds
2009
Texture development in near-α Ti friction stir welds
2010
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Effect of rotation rate on microstructure and texture evolution during friction stir welding of Ti–6Al–4V plates
2015
The Hitchhiker’s Guide to Flow Chemistry
2017 Standout
Similar and dissimilar friction-stir welding of an PM aluminum-matrix hybrid nanocomposite and commercial pure aluminum: Microstructure and mechanical properties
2016
Effect of the Surface State of Steel on the Microstructure and Mechanical Properties of Dissimilar Metal Lap Joints of Aluminum and Steel by Friction Stir Welding
2008
Expanded Theory of H- and J-Molecular Aggregates: The Effects of Vibronic Coupling and Intermolecular Charge Transfer
2018 Standout
Microstructural Changes Due to Friction Stir Processing of Investment-Cast Ti-6Al-4V
2007
Fabrication of Superhydrophobic CuO Surfaces with Tunable Water Adhesion
2011
Strengthening analyses and mechanical assessment of Ti/Al2O3 nano-composites produced by friction stir processing
2015
Flexible control of the microstructure and mechanical properties of friction stir welded Ti–6Al–4V joints
2012
Friction stir welding of titanium alloys: A review
2017
Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel
2012
Microstructural characteristics and mechanical properties of friction stir welded joints of Ti–6Al–4V titanium alloy
2009
Effect of rotation speed on microstructure and mechanical properties of Ti–6Al–4V friction stir welded joints
2009
Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds
2008
Dissimilar friction stir welding of Ti–6Al–4V alloy and aluminum alloy employing a modified butt joint configuration: Influences of process variables on the weld interfaces and tensile properties
2013
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds
2007
Modification of mechanical properties of friction stir welded Cu joint by additional liquid CO2 cooling
2013
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Photochemical Control of Exciton Superradiance in Light-Harvesting Nanotubes
2018 StandoutNobel
Welding of Aluminum Alloys to Steels: An Overview
2014
Enhanced Emission and Its Switching in Fluorescent Organic Nanoparticles
2002 Standout
Friction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
2016
Microstructure evolution and mechanical properties of friction stir welded dissimilar joints of Mg–Zn–Gd and Mg–Al–Zn alloys
2016
Tool Wear Characteristics and Effect on Microstructure in Ti-6Al-4V Friction Stir Welded Joints
2016
Micro and macro mechanical characterization of friction stir welded Ti–6Al–4V lap joints through experiments and numerical simulation
2013
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Development of grain structure during friction stir welding of pure titanium
2009
Remarkable Polymorphism in Gels of New Azobenzene Bis-urea Gelators
2002 StandoutNobel
Study on the Formation and Characterization of the Intermetallics in Friction Stir Welding of Aluminum Alloy to Coated Steel Sheet Lap Joint
2014
Enhanced mechanical properties of 70/30 brass joint by rapid cooling friction stir welding
2014
Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations
2015
Microstructure and Mechanical Properties of a Dissimilar Friction Stir Weld between Austenitic Stainless Steel and Low Carbon Steel
2013
Interfacial Reaction during Friction Stir Welding of Al and Cu
2011
The origin of different microstructural and strengthening mechanisms of copper and brass in their dissimilar friction stir welded joint
2018
Investigation of Fe-rich fragments in aluminum-steel friction stir welds via simultaneous Transmission Kikuchi Diffraction and EDS
2016
Formation and distribution of brittle structures in friction stir welding of aluminium and copper: influence of process parameters
2011
Investigations on the effects of friction stir welding parameters on intermetallic and defect formation in joining aluminum alloy to mild steel
2013
Texture of friction stir welded Ti–6Al–4V alloy
2014
Ultrafast Photoinduced Symmetry-Breaking Charge Separation and Electron Sharing in Perylenediimide Molecular Triangles
2015 StandoutNobel
Scanning Probe Lithography Using Self-Assembled Monolayers
2003
Polymer Microfluidics: Simple, Low-Cost Fabrication Process Bridging Academic Lab Research to Commercialized Production
2016
Ultrasonic vibration assisted friction stir welding of aluminium alloy and pure copper
2019
Dissimilar friction stir welding between magnesium and aluminum alloys
2008
Gold Nanoparticles in Chemical and Biological Sensing
2012 Standout
Al-to-Cu Friction Stir Lap Welding
2011
R6G on Graphene: High Raman Detection Sensitivity, Yet Decreased Raman Cross-Section
2012 StandoutNobel
Heterogeneous Catalysis of a Copper-Coated Atomic Force Microscopy Tip for Direct-Write Click Chemistry
2009 StandoutNobel
Friction stir welding and processing
2005 Standout
The effect of changing chemical composition on dissimilar Mg/Al friction stir welded butt joints using zinc interlayer
2018
Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds
2010
Friction stir diffusion bonding of dissimilar metals
2010
Analysis and Joining of Al–Cu Plates Using Friction-Stir Welding Technique
2017
Microstructural evolution of pure copper during friction-stir welding
2015
Construction of superhydrophobic hydromagnesite films on the Mg alloy
2011
Microstructural and mechanical properties of a beta-type titanium alloy joint fabricated by friction stir welding
2017
Hyperdiploidy is less frequent in AL amyloidosis compared with monoclonal gammopathy of undetermined significance and inversely associated with translocation t(11;14)
2011
Submerged friction stir processing (SFSP): An improved method for creating ultra-fine-grained bulk materials
2005
Realization of high tensile ductility in a bulk metallic glass composite by the utilization of deformation-induced martensitic transformation
2011
Chemistry and Properties of Nanocrystals of Different Shapes
2005 Standout
Continuous fabrication of bulk amorphous alloy sheets by twin-roll strip casting
2006
Mechanical Fixation by Porphyrin Connection: Synthesis and Transport Studies of a Bicyclic Dimer
2019 StandoutNobel
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Texture development in the stir zone of near-α titanium friction stir welds
2009
The exciton model in molecular spectroscopy
1965 Standout
Friction stir welding of aluminium alloys
2009 Standout
Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel
2019
Nanostructures in Biodiagnostics
2005 Standout
Advanced Carbon Electrode Materials for Molecular Electrochemistry
2008 Standout
Butt joining of Al–Cu bilayer sheet through friction stir welding
2012
Scalable mRNA and siRNA Lipid Nanoparticle Production Using a Parallelized Microfluidic Device
2021 StandoutNobel
Interface microstructure evolution of dissimilar friction stir butt welded F82H steel and SUS304
2011
Weld appearance and microstructural characteristics of friction stir butt barrier welded joints of aluminium alloy to copper
2012
Comprehensive analysis of joint strength for dissimilar friction stir welds of mild steel to aluminum alloys
2009
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Characteristics of aluminum-to-steel joint made by friction stir welding: A review
2015
Reflection and Absorption Techniques for Optical Characterization of Chemically Assembled Nanomaterials
2004
High rate of CAD gene amplification in human cells deficient in MLH1 or MSH6
2001 StandoutNobel
Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
2014
Microstructural studies of friction stir welded Zircaloy-4
2012
Friction stir welding of aluminum to copper—An overview
2017
Are redox probes a useful indicator of film stability? An electrochemical, AFM and XPS study of electrografted amine films on carbon
2007
Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloy
2010
Microstructure and Mechanical Properties in Dissimilar Butt Friction Stir Welding of Severely Plastic Deformed Aluminum AA 1050 and Commercially Pure Copper Sheets
2013
Tool travel speed effects on the microstructure of friction stir welded aluminum–copper joints
2014
Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3
2009
Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool
2007
Microstructure and mechanical properties of dissimilar Al–Cu joints by friction stir welding
2015
Tool wear mechanisms in friction stir welding of Ti–6Al–4V alloy
2014
Texture variation and its influence on the tensile behavior of a friction-stir processed magnesium alloy
2006
Emerging Droplet Microfluidics
2017 Standout
Characterization of boron carbide particulate reinforced in situ copper surface composites synthesized using friction stir processing
2013
Friction stir butt welding of strain-hardened aluminum alloy with high strength steel
2018
Microstructural Changes Due to Friction Stir Processing of Investment-Cast Ti-6Al-4V
2007
Microstructural Characterization of Friction Stir Welded Aluminum-Steel Joints
2016
Development of Microstructure and Crystallographic Texture during Stationary Shoulder Friction Stir Welding of Ti-6Al-4V
2011
Studying of tool rotation speed on mechanical properties of copper–Al5083 butt joint welded by friction stir welding
2014
Surface modification of pure titanium via friction stir processing: Microstructure evolution and dry sliding wear performance
2019
Microstructural zones and tensile characteristics of friction stir welded joint of TC4 titanium alloy
2010
Effects of welding parameters and tool geometry on properties of 3003-H18 aluminum alloy to mild steel friction stir weld
2013
Exploitation of Localized Surface Plasmon Resonance
2004 Standout
Friction-stir dissimilar welding of aluminium alloy to high strength steels: Mechanical properties and their relation to microstructure
2012
Tool wear and its effect on microstructure and properties of friction stir processed Ti–6Al–4V
2014
International Staging System for Multiple Myeloma
2005 Standout
Effects of preheating treatment on temperature distribution and material flow of aluminum alloy and steel friction stir welds
2017
Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al–Cu joints
2011
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
2014 Standout
Works of Wonbae Lee being referenced
Detection of aneuploidy and possible deletion in paraffin-embedded rhabdomyosarcoma cells with FISH
1993
The Joint Characteristics of Friction Stir Welded AZ91D Magnesium Alloy
2003
Use of fluorescence in situ hybridization for retrospective detection of aneuploidy in multiple myeloma
1993
Surface Modification of Droplet Polymeric Microfluidic Devices for the Stable and Continuous Generation of Aqueous Droplets
2011
Comparison of chromosome aberrations in leiomyoma and leiomyosarcoma using FISH on archival tissues
1994
Hybrid Friction Stir Welding of High-carbon Steel
2011
Effects of copper insert layer on the properties of friction welded joints between TiAl and AISI 4140 structural steel
2004
Interfacial reaction in steel–aluminum joints made by friction stir welding
2006
Lap joint properties of FSWed dissimilar formed 5052 Al and 6061 Al alloys with different thickness
2008
Quantifying chromosome changes and lineage involvement in myelodysplastic syndrome (MDS) using fluorescent in situ hybridization (FISH).
1994
Single-molecule FRET and linear dichroism studies of DNA breathing and helicase binding at replication fork junctions
2013
The joint properties of copper by friction stir welding
2003
Void Free Friction Stir Weld Zone Of The Dissimilar 6061 Aluminum And Copper Joint By Shifting The Tool Insertion Location
2004
A Three‐Dimensional and Sensitive Bioassay Based on Nanostructured Quartz Combined with Viral Nanoparticles
2010
Recent Applications of Laser‐Induced Breakdown Spectrometry: A Review of Material Approaches
2004
Gastrointestinal tract cancer screening using fecal carcinoembryonic antigen.
2003
The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materials
2003
Chemical Approach to High-Resolution Patterning on Self-Assembled Monolayers Using Atomic Force Microscope Lithography
2002
Surface Functional Group Effect on Atomic Force Microscope Anodization Lithography
2005
Nanostructure-Dependent Water-Droplet Adhesiveness Change in Superhydrophobic Anodic Aluminum Oxide Surfaces: From Highly Adhesive to Self-Cleanable
2009
Organized molecular assemblies for scanning probe microscope lithography
2002
Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing
2004
Microstructural investigation of friction stir welded pure titanium
2005
Temperature-Dependent Conformations of a Membrane Supported Zinc Porphyrin Tweezer by 2D Fluorescence Spectroscopy
2013
Superhydrophobic fabrication of anodic aluminum oxide with durable and pitch-controlled nanostructure
2010