Citation Impact
Citing Papers
Effect of bulking agents on maturity and gaseous emissions during kitchen waste composting
2013 Standout
A Review of Turbine Blade Tip Heat Transfer
2001
Distribution of heat sources in vertical open channels with natural convection
2004
Numerical study of laminar mixed convection of a nanofluid in horizontal curved tubes
2006
Effect of Aggregation Kinetics on the Thermal Conductivity of Nanoscale Colloidal Solutions (Nanofluid)
2006 Standout
ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL
1988 Standout
Manufacture, characterisation and application of cellular metals and metal foams
2001 Standout
Numerical simulation of a shell-and-tube latent heat thermal energy storage unit
1993
NUMERICAL STUDY OF NATURAL-CONVECTION-DOMINATED MELTING INSIDE UNIFORMLY AND DISCRETELY HEATED RECTANGULAR CAVITIES
1998
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
High temperature latent heat thermal energy storage using heat pipes
2010
Analysis and optimization of a latent thermal energy storage system with embedded heat pipes
2011
Thermal behavior of curved roof buildings exposed to solar radiation and wind flow for various orientations
2008
Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes
1996 Standout
Economic Evaluation of Shell-and-tube Latent Heat Thermal Energy Storage for Concentrating Solar Power Applications
2015
Geometric Optimization of Periodic Flow and Heat Transfer in a Volume Cooled by Parallel Tubes
2000
Design of Membrane-Encapsulated Wireless Photoelectrochemical Cells for Hydrogen Production
2014
Multifunctionality of cellular metal systems
1998 Standout
Heat transfer in open-cell metal foams
1998
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Dendritic constructal heat exchanger with small-scale crossflows and larger-scales counterflows
2002
Characterizing flow and transport in fractured geological media: A review
2002 Standout
Multistage polymer electrolyte fuel cells based on nonuniform cell potential distribution functions
2005
Progress in study on constructal theory and its applications
2012 Standout
Two Constructal Routes to Minimal Heat Flow Resistance via Greater Internal Complexity
1999
Air flow and thermal efficiency characteristics in solar chimneys and Trombe Walls
2006
Boundary-layer flow of a nanofluid past a stretching sheet
2010 Standout
Relation between the points of flow reattachment and maximum heat transfer for regions of flow separation
1987
The melting process of ice from a vertical wall with time-periodic temperature perturbation inside a rectangular enclosure
1993
Energy performance of Trombe walls: Adaptation of ISO 13790:2008(E) to the Portuguese reality
2014 Standout
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
2009 Standout
Study of the thermal behavior of a latent heat cold storage unit operating under frosting conditions
2003
Constructal-theory network of conducting paths for cooling a heat generating volume
1997
Optimal conduction pathways for cooling a heat-generating body: A comparison exercise
2007
A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins
2009
Numerical study of natural convection in partially heated rectangular enclosures filled with nanofluids
2008 Standout
Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel
2006
Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials
2008
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Effect of process parameters on the EHD airflow
2009
Natural-convection-dominated melting heat transfer in an inclined rectangular enclosure
1986
An overview of thermal energy storage systems
2017 Standout
A review on photovoltaic/thermal hybrid solar technology
2009 Standout
A review on phase change energy storage: materials and applications
2003 Standout
Thermal energy storage materials and systems for solar energy applications
2016 Standout
Review on thermal energy storage with phase change: materials, heat transfer analysis and applications
2002 Standout
Gravity‐destabilized nonwetting phase invasion in macroheterogeneous porous media: Experimental observations of invasion dynamics and scale analysis
2000
A model and heat transfer correlation for rooftop integrated photovoltaics with a passive air cooling channel
2009
Combined `flow and strength' geometric optimization: internal structure in a vertical insulating wall with air cavities and prescribed strength
2002
A critical review of the intrinsic nature of vortex-induced vibrations
2004 Standout
On the performances of a hybrid air-conditioning system in different climatic conditions
2011
Achieving better energy-efficient air conditioning – A review of technologies and strategies
2012 Standout
Fluctuating lift on a circular cylinder: review and new measurements
2003
Recommendation system based on deep learning methods: a systematic review and new directions
2019 Standout
Tree network channels as fluid distributors constructing double-staircase polymer electrolyte fuel cells
2004
Étude numérique de la fusion dans des enceintes rectangulaires chauffées uniformément ou discrètement par les parois latérales conductrices
1998
Review on thermal energy storage with phase change materials and applications
2008 Standout
Transient behaviour of a latent-heat thermal-energy store: numerical and experimental studies
2002
HYBRID MODEL FOR SOLIDIFICATION AND CONVECTION
1992
The problem of time-dependent natural convection melting with conduction in the solid
1989
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
2010 Standout
Gas Turbine Film Cooling
2006 Standout
Convective Transport in Nanofluids
2005 Standout
Numerical analysis of a coupled solar collector latent heat storage unit using various phase change materials for heating the water
2008
Thermoelectric Solid-Oxide Fuel Cells with Extra Power Conversion from Waste Heat
2012 StandoutNobel
A validated model of naturally ventilated PV cladding
2000
Cross Domain Recommender Systems
2017
Melting in a side heated tall enclosure by a uniformly dissipating heat source
2001
Ultralight, ultrastiff mechanical metamaterials
2014 StandoutScience
Energy-Constrained Open-System Magmatic Processes I: General Model and Energy-Constrained Assimilation and Fractional Crystallization (EC-AFC) Formulation
2001 Standout
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
Thermal energy storage technologies and systems for concentrating solar power plants
2013 Standout
Recent advances in the use of infrared thermography
2004 Standout
Development of tree-shaped flows by adding new users to existing networks of hot water pipes
2002
Optimal active cooling performance of metallic sandwich panels with prismatic cores
2006
Optimization of cross flow heat exchangers for thermoelectric waste heat recovery
2003
Numerical predictions of entropy generations for mixed convective flows in a vertical channel with transverse fin array
1994
A review on macro-encapsulated phase change material for building envelope applications
2018 Standout
Designed porous media: maximal heat transfer density at decreasing length scales
2004
Optimal geometry of L and C-shaped channels for maximum heat transfer rate in natural convection
2004
Review on phase change materials (PCMs) for cold thermal energy storage applications
2012 Standout
Optimal tree-shaped networks for fluid flow in a disc-shaped body
2002
The topological design of multifunctional cellular metals
2001 Standout
Works of Win Aung being referenced
Handbook of single-phase convective heat transfer
1987
Effect of wall conduction on free convection between asymmetrically heated vertical plates: uniform wall heat flux
1990
Numerical prediction of lock-on effect on convective heat transfer from a transversely oscillating circular cylinder
1997
Building Ontologies for Cross-domain Recommendation on Facial Skin Problem and Related Cosmetics
2014
An Experimental Study of Laminar Heat Transfer Downstream of Backsteps
1983
Developing laminar free convection between vertical flat plates with asymmetric heating
1972
Natural convection: Fundamentals and applications
1985
Cooling Technology for Electronic Equipment
1988
Theory of Fully Developed, Combined Convection Including Flow Reversal
1986
Fully developed laminar free convection between vertical plates heated asymmetrically
1972
Starting Flow and Heat Transfer Downstream of a Backward-Facing Step
1991
Optimal shape design for packaging containing heating elements by inverse heat transfer method
2002