Citation Impact
Citing Papers
Predicting Low Toxicity and Scalable Solvent Systems for High‐Speed Roll‐to‐Roll Perovskite Manufacturing
2021 StandoutNobel
A polymer tandem solar cell with 10.6% power conversion efficiency
2013 Standout
Nano-based smart pesticide formulations: Emerging opportunities for agriculture
2018 Standout
Organic solar cells based on non-fullerene acceptors
2018 Standout
Drying of thin colloidal films
2013
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
2014 Standout
Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages
2019 Standout
End-to-end design of wearable sensors
2022 Standout
Polymeric micelles in drug delivery: An insight of the techniques for their characterization and assessment in biorelevant conditions
2021 Standout
Controlled placement of colloidal quantum dots in sub-15 nm clusters
2013 StandoutNobel
Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology
2022 Standout
Advanced grazing-incidence techniques for modern soft-matter materials analysis
2014
Highly Efficient and Reproducible Nonfullerene Solar Cells from Hydrocarbon Solvents
2017
Thermal maps of gases in heterogeneous reactions
2013 StandoutNatureNobel
Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells
2018
Chemical Synthesis and Luminescence Applications of Colloidal Semiconductor Quantum Dots
2017 StandoutNobel
Non-fullerene acceptors for organic solar cells
2018 Standout
Purely Organic Thermally Activated Delayed Fluorescence Materials for Organic Light‐Emitting Diodes
2017 Standout
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
2017 Standout
Structure and Nanostructure in Ionic Liquids
2015 Standout
Study of the activation energy for transport of water and methanol through a Nafion membrane
2009
From iridium and platinum to copper and carbon: new avenues for more sustainability in organic light-emitting diodes
2015
Electrospun PEDOT:PSS–PVA nanofiber based ultrahigh-strain sensors with controllable electrical conductivity
2011
Thick Electrodes for High Energy Lithium Ion Batteries
2015
Challenges in speeding up solid-state battery development
2023 Standout
Analysis of in situ water transport in Nafion® by confocal micro-Raman spectroscopy
2010
Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells
2011
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Morphology Development in Solution-Processed Functional Organic Blend Films: An In Situ Viewpoint
2017
Single‐Junction Organic Photovoltaic Cell with 19% Efficiency
2021
Current status and challenges for automotive battery production technologies
2018
Translational Applications of Hydrogels
2021
Expanded Theory of H- and J-Molecular Aggregates: The Effects of Vibronic Coupling and Intermolecular Charge Transfer
2018 Standout
Measurement and analysis of spatial reactor profiles in high temperature catalysis research
2011
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
2015 StandoutScience
Roll-to-roll fabrication of polymer solar cells
2012 Standout
Interference of Interchromophoric Energy-Transfer Pathways in π-Conjugated Macrocycles
2016
Enhancing the lithium storage capacity of FeF3 cathode material by introducing C@LiF additive
2018
Miscibility, Crystallinity, and Phase Development in P3HT/PCBM Solar Cells: Toward an Enlightened Understanding of Device Morphology and Stability
2011
Inverted organic photovoltaic cells
2016
Correlation of diffusion and performance in sequentially processed P3HT/PCBM heterojunction films by time-resolved neutron reflectometry
2013
A Brief History of OLEDs—Emitter Development and Industry Milestones
2021 Standout
Scalable solution coating of the absorber for perovskite solar cells
2017
Raman Microspectroscopy as a Useful Tool for In Situ and Operando Studies of Water Transport in Perfluorosulfonic Membranes for PEMFCs
2014
Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells
2021 Standout
Intrinsic Challenges to the Electrochemical Reversibility of the High Energy Density Copper(II) Fluoride Cathode Material
2019 StandoutNobel
In situ analysis of water management in operating fuel cells by confocal Raman spectroscopy
2011
Crystallization-Induced 10-nm Structure Formation in P3HT/PCBM Blends
2013
Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare
2016 Standout
Does the Like Dissolves Like Rule Hold for Fullerene and Ionic Liquids?
2014
Roll‐to‐Roll fabrication of large area functional organic materials
2012
Designing solid-state electrolytes for safe, energy-dense batteries
2020 Standout
A review of the operating limits in slot die coating processes
2016
3 In situ and operando determination of the water content distribution in proton conducting membranes for fuel cells: a critical review
2012
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Recent advances in organic thermally activated delayed fluorescence materials
2017 Standout
A High-Performance All-Solid-State Sodium Battery with a Poly(ethylene oxide)–Na3Zr2Si2PO12 Composite Electrolyte
2019 StandoutNobel
Synchrotron Scattering Methods for Nanomaterials and Soft Matter Research
2020
Effect of multiwalled carbon nanotube loading on the properties of Nafion® membranes
2014
How the Charge-Neutrality Level of Interface States Controls Energy Level Alignment in Cathode Contacts of Organic Bulk-Heterojunction Solar Cells
2012
Beyond PCBM: methoxylated 1,4-bisbenzyl[60]fullerene adducts for efficient organic solar cells
2015
Research opportunities to advance solar energy utilization
2016 StandoutScience
Absence of Schroeder's paradox: Experimental evidence for water-swollen Nafion® membranes
2011
Halide‐Based Materials and Chemistry for Rechargeable Batteries
2019
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
2013
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
2013 Standout
Temperature dependence of the water distribution inside a Nafion membrane in an operating polymer electrolyte fuel cell. A micro-Raman study
2011
Pathways for practical high-energy long-cycling lithium metal batteries
2019 StandoutNobel
Electrochemically driven conversion reaction in fluoride electrodes for energy storage devices
2018
Doctor-blade deposition of quantum dots onto standard window glass for low-loss large-area luminescent solar concentrators
2016
Breaking the 10% Efficiency Barrier in Organic Photovoltaics: Morphology and Device Optimization of Well‐Known PBDTTT Polymers
2016
Roadmap for advanced aqueous batteries: From design of materials to applications
2020 Standout
Next-generation organic photovoltaics based on non-fullerene acceptors
2018 Standout
Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
2020 Standout
The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques
2014
Good Practices for Rechargeable Lithium Metal Batteries
2019 StandoutNobel
Advanced Ellipsometric Characterization of Conjugated Polymer Films
2013
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
2020 Standout
Efficient organic solar cells processed from hydrocarbon solvents
2016 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Lithium-ion batteries: outlook on present, future, and hybridized technologies
2019 Standout
Single-junction polymer solar cells with high efficiency and photovoltage
2015 Standout
3D printing of open-porous cellular ceramics with high specific strength
2017
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
2015 Standout
Past achievements and future challenges in the development of optically transparent electrodes
2012 Standout
Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure
2021
Roll-to-roll slot-die coated P–I–N perovskite solar cells using acetonitrile based single step perovskite solvent system
2020
A universal halogen-free solvent system for highly efficient polymer solar cells
2015
Carbon nanotubes: A potential material for energy conversion and storage
2017
What Limits the Capacity of Layered Oxide Cathodes in Lithium Batteries?
2019 StandoutNobel
Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering
2017
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
2016 Standout
Works of Wilhelm Schabel being referenced
Drying and film formation of industrial waterborne latices
2007
Polymeric anodes from poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) for 3.5% efficient organic solar cells
2009
Moving through the Phase Diagram: Morphology Formation in Solution Cast Polymer–Fullerene Blend Films for Organic Solar Cells
2011
Drying, film formation and open time of aqueous polymer dispersions
2009
Mass transport measurements in membranes by means of in situ Raman spectroscopy—First results of methanol and water profiles in fuel cell membranes
2007
Effect of Photovoltaic Polymer/Fullerene Blend Composition Ratio on Microstructure Evolution during Film Solidification Investigated in Real Time by X-ray Diffraction
2011
Pressure drop measurements of ceramic sponges—Determining the hydraulic diameter
2009
Inverse Mikro-Raman-Spektroskopie - Eine neue Messmethode zur Untersuchung lokaler Stofftransportvorgänge in dünnen Filmen, Folien und Membranen
2005
Analytical determination of process windows for bilayer slot die coating
2015
Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings
2013
An experimental and analytical study on intermittent slot die coating of viscoelastic battery slurries
2015
Structure Formation in Low-Bandgap Polymer:Fullerene Solar Cell Blends in the Course of Solvent Evaporation
2012
Gaining Further Insight into the Solvent Additive-Driven Crystallization of Bulk-Heterojunction Solar Cells by in Situ X-ray Scattering and Optical Reflectometry
2016
In Situ X‐Ray Study of Drying‐Temperature Influence on the Structural Evolution of Bulk‐Heterojunction Polymer–Fullerene Solar Cells Processed by Doctor‐Blading
2011
Investigation of binder distribution in graphite anodes for lithium-ion batteries
2016
Investigation of film solidification and binder migration during drying of Li-Ion battery anodes
2016
Development of a water based process for stable conversion cathodes on the basis of FeF3
2016
Slot-die processing of lithium-ion battery electrodes—Coating window characterization
2012
A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties
2014
Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells
2011
Investigations on knife and slot die coating and processing of polymer nanoparticle films for hybrid polymer solar cells
2010
Impact of drying conditions and wet film properties on adhesion and film solidification of lithium-ion battery anodes
2017
Slot die stripe coating of low viscous fluids
2018
Comparison of large scale coating techniques for organic and hybrid films in polymer based solar cells
2012
Modelling of alcohol and water diffusion in fuel cell membranes—Experimental validation by means of in situ Raman spectroscopy
2008
In situ monitoring the drying kinetics of knife coated polymer-fullerene films for organic solar cells
2009
Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution
2015
Process and Product Development of Electrodes for Lithium‐Ion Cells
2014
Development of a three-stage drying profile based on characteristic drying stages for lithium-ion battery anodes
2017