Citation Impact
Citing Papers
One-part alkali-activated materials: A review
2017 Standout
Microwave chemistry for inorganic nanomaterials synthesis
2010 Standout
Development of iron oxide and titania treated fly ash based ceramic and its bioactivity
2012
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
A review of fabrication and applications of carbon nanotube film-based flexible electronics
2013
Designing the next generation of proton-exchange membrane fuel cells
2021 StandoutNature
Recent developments of zinc oxide based photocatalyst in water treatment technology: A review
2015 Standout
Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials
2011
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Titanium dioxide reinforced hydroxyapatite coatings deposited by high velocity oxy-fuel (HVOF) spray
2002
The antimicrobial activity of nanoparticles: present situation and prospects for the future
2017 Standout
Applications of nanotechnology in water and wastewater treatment
2013 Standout
Bioinspired structural materials
2014 Standout
Preparation and characterization of glass–ceramic foams with waste quartz sand and coal gangue in different proportions
2015
Facile decoration of carbon fibers with Ag nanoparticles for adsorption and photocatalytic reduction of CO2
2016
Calcined clay limestone cements (LC3)
2017 Standout
Emerging challenges and materials for thermal management of electronics
2014 Standout
Effective thermal conductivity of particulate composites with interfacial thermal resistance
1997 Standout
Effect of Aggregation Kinetics on the Thermal Conductivity of Nanoscale Colloidal Solutions (Nanofluid)
2006 Standout
Dielectric Properties of Fine‐Grained Barium Titanate Based X7R Materials
1999
Highly Thermally Conductive Yet Electrically Insulating Polymer/Boron Nitride Nanosheets Nanocomposite Films for Improved Thermal Management Capability
2018 Standout
Assessment of microstructure and wear behavior of aluminum nitrate reinforced surface composite layers synthesized using friction stir processing on copper substrate
2017
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
2010 Standout
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
2006 Standout
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
2010 Standout
Performance of Fe–Ni bimetallic oxygen carriers for chemical looping gasification of biomass in a 10 kWth interconnected circulating fluidized bed reactor
2015
A kinetic study of gaseous potassium capture by coal minerals in a high temperature fixed-bed reactor
2008
Thermal conductivity of polymer-based composites: Fundamentals and applications
2016 Standout
Review of hydrogen production using chemical-looping technology
2017 Standout
Processing techniques for functionally graded materials
2003 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Frequency effect on pulse electric current sintering process of pure aluminum powder
2003
Combustion synthesis of ZnO and Ag-doped ZnO and their bactericidal and photocatalytic activities
2011
Visible-Light-Assisted HCHO Gas Sensing Based on Fe-Doped Flowerlike ZnO at Room Temperature
2011
Comprehensive investigation on hydrogen and fuel cell technology in the aviation and aerospace sectors
2019 Standout
Development of a new rapid, relevant and reliable (R3) test method to evaluate the pozzolanic reactivity of calcined kaolinitic clays
2016
A comprehensive review on the applications of coal fly ash
2014 Standout
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Continuous High-Yield Production of Vertically Aligned Carbon Nanotubes on 2D and 3D Substrates
2011
Effect of shale addition on properties of sintered coal fly ash
2010
Characterization of halloysite from Thung Yai District, Nakhon Si Thammarat Province, in Southern Thailand
2011
Perfluoroalkyl-Functionalized Covalent Organic Frameworks with Superhydrophobicity for Anhydrous Proton Conduction
2020 StandoutNobel
Host–Guest Assembly of H-Bonding Networks in Covalent Organic Frameworks for Ultrafast and Anhydrous Proton Transfer
2021 StandoutNobel
Biomass-based chemical looping technologies: the good, the bad and the future
2017 Standout
Effect of calcination temperature of kaolin as a support for zeolite membranes
2003
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
Materials, technological status, and fundamentals of PEM fuel cells – A review
2019
Contributions of intrinsic and extrinsic polarization species to energy storage properties of Ba0.95Ca0.05Zr0.2Ti0.8O3 ceramics
2017
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
2013 Standout
Synthesis and characterization of spinel-type zinc aluminate nanoparticles by a modified sol–gel method using new precursor
2010
Selective Laser Melting Additive Manufacturing of Hard-to-Process Tungsten-Based Alloy Parts With Novel Crystalline Growth Morphology and Enhanced Performance
2015
Nanoparticles of Ni on Al2O3Ceramic Powder Coated by Chemical Reactions
2002
Recycling food, agricultural, and industrial wastes as pore-forming agents for sustainable porous ceramic production: A review
2021 Standout
Stretchable, Skin‐Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
2016 Standout
Building the hydrogen economy in China: Drivers, resources and technologies
2013
Morphology and properties of UV/ozone treated graphite nanoplatelet/epoxy nanocomposites
2006
Recent Advances in the Liquid-Phase Syntheses of Inorganic Nanoparticles
2004 Standout
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
2015 Standout
Semiconductor-based Photocatalytic Hydrogen Generation
2010 Standout
A review of ZnO nanoparticles as solar photocatalysts: Synthesis, mechanisms and applications
2017 Standout
A Highly Efficient Ag-ZnO Photocatalyst: Synthesis, Properties, and Mechanism
2008
Crystal Structure and the Paraelectric-to-Ferroelectric Phase Transition of Nanoscale BaTiO3
2008 StandoutNobel
A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade
2016 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Morphology modulation of SiC nano-additives for mechanical robust high thermoelectric performance Mg2Si1−Sn /SiC nano-composites
2016
Synthesis of nanosized and microporous zinc aluminate spinel by microwave assisted hydrothermal method (microwave–hydrothermal synthesis of ZnAl2O4)
2005
Mechanical property and fracture behavior of strip cast Zr-base BMG alloy containing crystalline phase
2004
Cocatalysts for Selective Photoreduction of CO2into Solar Fuels
2019 Standout
Developments in fuel cell technologies in the transport sector
2016
Recent advances in carbon-based polymer nanocomposites for electromagnetic interference shielding
2019 Standout
Nanoscale thermal transport
2003 Standout
Recent advances in graphene based polymer composites
2010 Standout
Microstructure and Phase Evolution of Niobium-Aluminide–Alumina Composites Prepared by Melt-Infiltration
1998
Developments of electric cars and fuel cell hydrogen electric cars
2017
Mechanism of geopolymerization and factors influencing its development: a review
2007 Standout
Mechanical behavior of amorphous alloys
2007 Standout
NiNb2O6‐BaTiO3 Ceramics for Energy‐Storage Capacitors
2017
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
2021 Standout
Middle Eocene clay from Goset Abu Khashier: Geological assessment and utilization with drinking water treatment sludge in brick manufacture
2017
Synthetic nacre by predesigned matrix-directed mineralization
2016 StandoutScience
Nanostructured Materials for Room‐Temperature Gas Sensors
2015 Standout
Mechanical alloying synthesis and bioactivity evaluation of nanocrystalline fluoridated hydroxyapatite
2008
A global review of energy consumption, CO 2 emissions and policy in the residential sector (with an overview of the top ten CO 2 emitting countries)
2014 Standout
Comprehensive utilization and environmental risks of coal gangue: A review
2019 Standout
Dehydroxylation of kaolinite to metakaolin—a molecular dynamics study
2010
25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress
2013 Standout
Works of Wei‐Hsing Tuan being referenced
Effect of truing of a diamond wheel on the strength of alumina after abrasive grinding
1997
Pressureless Sintering of Al2O3/Ni Nanocomposites
1999
The strength of duplex Al2O3-ZnAl2O4 composite
1996
Effect of zirconia addition on the microstructural evolution of porous hydroxyapatite
2006
Alumina/tungsten nanocomposites obtained by Spark Plasma Sintering
2009
Effects of pre-sintering heat treatment on the microstructure of barium titanate
1996
Toughening alumina with both nickel and zirconia inclusions
2000
Microstructure transition from normal to abnormal grains for BaTiO3
2009
Processing of alumina/nickel composites
1992
Acicular Mullite Crystals in Vitrified Kaolin
2004
Effect of Ag on the microstructure and electrical properties of ZnO
2007
Toughening alumina with nickel aluminide inclusions
2000
Preparation of AlN/Cu composites through a reactive infiltration process
2016
Transfer of patterned vertically aligned carbon nanotubes onto plastic substrates for flexible electronics and field emission devices
2009
Microstructural evolution of mullite during the sintering of kaolin powder compacts
2000
The toughening of alumina with nickel inclusions
1990
Microstructure and thermal conduction properties of Al2O3Ag composites
1996
Evolution of Mullite Texture on Firing Tape‐Cast Kaolin Bodies
2002
Corrosion behavior of TiN-coated stainless steel as bipolar plate for proton exchange membrane fuel cell
2010
Formation of nano-contacts on Fe–Ni–Cr alloy for bipolar plate of proton exchange membrane fuel cell
2011
Thermal diffusivity, heat capacity and thermal conductivity in Al2O3Ni composite
1995
Preparation of mullite by the reaction sintering of kaolinite and alumina
2000
The effect of microstructure on the electrical properties of NiO-doped BaTiO3
1999
Elastic properties of ceramic–metal particulate composites
2004
TiN-coated titanium as the bipolar plate for PEMFC by multi-arc ion plating
2011
The preparation of AI2O3/Ni composites by a powder coating technique
1995
Inter-diffusion between NiCuZn-ferrite and LTCC and its influence on magnetic performance
2012