Citation Impact
Citing Papers
The effect of shear stress on the screw dislocation core structure in body-centred cubic lattices
1973
LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales
2021 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Probing the limits of metal plasticity with molecular dynamics simulations
2017 Nature
Deformation and fracture of electrodeposited copper
1998
Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum
1997
Inelastic x-ray scattering at ultrahigh pressures
2001 StandoutNobel
Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metal
2002
Atomic-level structure and structure–property relationship in metallic glasses
2010 Standout
Flux vortices and transport currents in type II superconductors
1972 Standout
THE DEFORMATION OF NIOBIUM SINGLE CRYSTALS
1967
Grain boundary versus transgranular ductile failure
2003
Strain localization in ductile single crystals
1977
Embrittlement of interfaces by solute segregation
1989 Standout
Magnetism in FeO at Megabar Pressures from X-Ray Emission Spectroscopy
1999 StandoutNobel
Metal matrix composites – From science to technological significance
2005 Standout
The influence of hydrogen on the development of localized plastic deformation in internally nitrided single crystals of iron
1989
Plastic deformation and sliding friction of metals
1979
Multiscale modeling of plastic deformation of molybdenum and tungsten: I. Atomistic studies of the core structure and glide of 1/2〈111〉 screw dislocations at 0K
2008
Microstructure of high-strain, high-strain-rate deformed tantalum
1998
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Elastic properties of vanadium-based alloys from first-principles theory
2012
Mechanical properties of nanocrystalline materials
2005 Standout
Some surprising features of the plastic deformation of body-centered cubic metals and alloys
1983 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
EXPONENTIAL MAP ALGORITHM FOR STRESS UPDATES IN ANISOTROPIC MULTIPLICATIVE ELASTOPLASTICITY FOR SINGLE CRYSTALS
1996
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Deformation twinning
1995 Standout
Influence of the Structure Parameters on the Relaxation of Semipolar InGaN/GaN Multi Quantum Wells
2013 StandoutNobel
Model of superlattice yield stress and hardness enhancements
1995
Computational modelling of impact damage in brittle materials
1996 Standout
Computer simulation of motion of screw dislocation in model B.C.C. lattices. II. Orientation dependence of slip
1974
Grain size effects in the deformation of polycrystalline iron
1986
A note on the deformation of fine grained magnesium alloys
1992
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Elastic–plastic characterization of a high strength bainitic roller bearing steel—experiments and modelling
2010
Nanostructurization of Nb by high-pressure torsion in liquid nitrogen and the thermal stability of the structure obtained
2012
Determination of the size of the representative volume element for random composites: statistical and numerical approach
2003 Standout
The type of dislocation interaction as the factor determining work hardening
1980
Martensite in steel: strength and structure
1999 Standout
Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials
1998
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
STAGE II WORK HARDENING IN CRYSTALS
1967
Development of shear bands in f.c.c. single crystals
1985
Steels for bearings
2011 Standout
Effects of hydrogen on notch ductility and fracture in spheroidized AISI 1090 steel
1983
Design and in-the-field performance evaluation of compact FBG sensor system for structural health monitoring applications
2009 StandoutNobel
Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
2010
Motion of screw dislocations under stress in a model B.C.C. lattice
1972
Deformation of amorphous Fe40Ni40P14B6 under compression to 250 kbar
1982
On dislocation storage and the mechanical response of fine scale microstructures
1994
Effect of a controlled volume fraction of dendritic phases on tensile and compressive ductility in La-based metallic glass matrix composites
2004 Standout
Models and computational methods for dynamic friction phenomena
1985 Standout
Low-temperature softening in body-centered cubic alloys
1980
Deformation kinetics for {1010}〈1120〉 slip in titanium single crystals below 0.4Tm
1972
Solution softening and hardening in the IronCarbon system
1975
DEFORMATION PROPERTIES OF NIOBIUM SINGLE CRYSTALS
1967
High-strain, high-strain-rate behavior of tantalum
1995
The Effect of Orientation on the Yielding and Flow of Molybdenum Single Crystals
1966
Experiments on the deformation of niobium single crystals
1967
An atomistic dislocation mechanism of pressure-dependent plastic flow in aluminum
1999
Pressure-Induced High-Spin to Low-Spin Transition in FeS Evidenced by X-Ray Emission Spectroscopy
1999 StandoutNobel
Asymmetry of slip and shape changes during cyclic deformation of α-iron single crystals
1976
Structure and mechanical properties of Cu-X (X = Nb,Cr,Ni) nanolayered composites
1998
PLASTIC ANISOTROPY OF TANTALUM, NIOBIUM, AND MOLYBDENUM
1967
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Characterization of inclusions in clean steels: a review including the statistics of extremes methods
2003
Finite element analyses of shear localization in rate and temperature dependent solids
1986
The theory of dislocation-based crystal plasticity
1999
Perspectives on Titanium Science and Technology
2013 Standout
A theory for amorphous viscoplastic materials undergoing finite deformations, with application to metallic glasses
2005
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
X-ray Imaging of Stress and Strain of Diamond, Iron, and Tungsten at Megabar Pressures
1997 Science
The effect of strain-rate on the cyclic deformation properties of α-iron single crystals
1976
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites
2005 Standout
Superconductivity in deformed niobium alloys
1966
Fiber-optic Bragg grating sensors for bridge monitoring
1997
Effect of Carbon on the Toughness and Fracture Mode of Fe–P Alloys
1982
Changes in surface topography during the early stage of cyclic deformation of b.c.c. iron-alloy single crystals
1980
Cyclic softening and thermally activated deformation of titanium and zirconium
1983
The asymmetric temperature dependence of yield stress in tantalum single crystals at low temperatures
1971
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Nanotechnology in concrete – A review
2010 Standout
Transformation of retained austenite in carburized 4320 steel
1991
An analysis of nonuniform and localized deformation in ductile single crystals
1982
Solidification, segregation, and banding in carbon and alloy steels
2003 Standout
Mechanical behavior of a bulk nanostructured iron alloy
1998
Screw-dislocation motion in b.c.c. transition metals model calculation using a tight-binding-type electronic theory
1981
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
2006 Standout
Analysis of the cup-cone fracture in a round tensile bar
1984 Standout
Experiments on the deformation of niobium single crystals. I. Stress versus strain curves and slip systems in compression and tension
1967
Description of tantalum deformation behavior by dislocation mechanics based constitutive relations
1990
Structural health monitoring of a composite bridge using Bragg grating sensors. Part 1: Evaluation of adhesives and protection systems for the optical sensors
2006 StandoutNobel
The onset of twinning in metals: a constitutive description
2001 Standout
Influence of void nucleation on ductile shear fracture at a free surface
1982
Material rate dependence and localized deformation in crystalline solids
1983
Microstructures and properties of high-entropy alloys
2013 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Smart and designer structural material systems
2002
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Slip planes and asymmetric slip in fatigue of iron single crystals
1972
A detailed study of the deformation of high purity niobium single crystals
1969
A simple empirical N-body potential for transition metals
1984 Standout
Mechanical behavior of amorphous alloys
2007 Standout
High-strength materials:in-situinvestigations of dislocation behaviour in Cu-Nb multifilamentary nanostructured composites
2002
Flow localization in the plane strain tensile test
1981
Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model
1988 Standout
Effects of matrix microstructure and particle distribution on fracture of an aluminum metal matrix composite
1989
Numerical simulations of fast crack growth in brittle solids
1994 Standout
Hydrogen interactions with defects in crystalline solids
1992 Standout
Formation of nanostructured surface layer on AISI 304 stainless steel by means of surface mechanical attrition treatment
2003 Standout
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress
1999 Standout
The effect of cumulative large plastic strain on the structure and properties of a Cu–Zn alloy
1998
Elastic-plastic analysis of arbitrary heterogeneous materials with the Voronoi Cell finite element method
1995
Deformation of electrodeposited nanocrystalline nickel
2003 Standout
Fe-Cu two-phase nanocomposites: application of a modified rule of mixtures
2000
Cyclic deformation of silicon-iron single crystals oriented for single glide
1979
Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel
1989
Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities
1979
Electronic theory for screw dislocation motion in dilute b.c.c. transition metal alloys
1981
Effect of aqueous and hydrogen environments on fatigue crack growth in 2Ni-Cr-Mo-V rotor steel
1979
Influence of nickel on toughness and ductile-brittle transition in low-carbon martensite steels
1979
The Study of Slip Bands on the Surface of Mo Single Crystals
1968
The influence of reinforcement morphology on the tensile response of 6061/SiC/25p discontinuously-reinforced aluminum
2003
Three-stage hardening in vanadium single crystals
1970
Works of W.A. Spitzig being referenced
The effects of orientation, temperature and strain rate on deformation of Fe−0.16 wt.% Ti single crystals
1973
The effect of hydrostatic pressure on the deformation behavior of maraging and HY-80 steels and its implications for plasticity theory
1976
Orientation dependence of the strain-rate sensitivity and thermally activated flow in iron single crystals
1970
Pressure dependence of yielding and associated volume expansion in tempered martensite
1975
A structural study of the influence of pressure on shear band formation
1984
Structure properties of heavily cold-drawn niobium
1991
The influence of hydrostatic pressure on the flow stress and ductility of a spherodized 1045 steel
1983
Dislocation arrangements in tantalum single crystals deformed in tension at 373°K
1966
Microstructural Aspects of Materials for Nondestructive Long-Pulse High-Field Magnets
1993
The effect of orientation and temperature on the plastic flow properties of iron single crystals
1970
Effect of hydrostatic pressure on plastic-flow properties of iron single crystals
1979
Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels
1982
Effect of sulfide inclusion morphology and pearlite banding on anisotropy of mechanical properties in normalized C-Mn steels
1983
HVEM analysis of three-dimensional dislocation structures in Fe crystals deformed at 173 K
1972
Mechanical properties of FeP and FePTi alloys between 77 and 773 K
1974
The role of internal and effective stresses in the plastic flow of iron single crystals
1970
Effect of hydrostatic pressure on the deformation behavior of polyethylene and polycarbonate in tension and in compression
1979
Strength and electrical conductivity of a deformation-processed Cu-5 Pct Nb composite
1993
Engineering research in composite and smart structures
1994
Quantitative characterization of second-phase populations
1985
Orientation and temperature dependence of slip in iron single crystals
1970
Comparison of the strengths and microstructures of Cu-20% Ta and Cu-20% Nb in situ composites
1988
The evolution of damage and fracture in iron compacts with various initial porosities
1988
Characterization of the strength and microstructural evolution of a heavily cold rolled Cu-20% Nb composite
1989
Solid-solution softening and thermally activated flow in alloys of Fe with 3at.% Co, Ni or Si
1971
Workability of 1045 spheroidized steel under superimposed hydrostatic pressure
1989
Characterization of the strength and microstructure of heavily cold worked CuNb composites
1987
Shear-band orientations in plane strain
1982
Deformation behavior of nitrogenated FeTiMn and FeTi single crystals
1981
Strengthening in heavily deformation processed Cu-20% Nb
1991
The effects of phosphorus on the mechanical properties of low-carbon iron
1972
Fatigue-crack propagation and fractographic analysis of 18Ni(250) maraging steel tested in argon and hydrogen environments
1968
Initiation of localized shear bands in plane strain
1980
Three-stage hardening in tantalum single crystals
1965
Influence of sulfide inclusions and pearlite content on the mechanical properties of hot-rolled carbon steels
1981
The effect of pressure on the flow stress of metals
1984
effects of hydrogen on low temperature hardening and embrittlement of V-Cr alloys
1987
Dislocation structures in deformed iron single crystals
1971
Effect of hydrostatic pressure on deformation, damage evolution, and fracture of iron with various initial porosities
1990
Measurement of filament spacing in deformation processed CuNb alloys
1991