Citation Impact
Citing Papers
Metallic materials for 3D printing
2016
Surface texture metrology for metal additive manufacturing: a review
2016
XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
2015
Interface interactions between porous titanium/tantalum coatings, produced by Selective Laser Melting (SLM), on a cobalt–chromium alloy
2008
Photodetectors based on graphene, other two-dimensional materials and hybrid systems
2014 Standout
Two-dimensional flexible nanoelectronics
2014 Standout
Electronics based on two-dimensional materials
2014 Standout
Graphene: An Emerging Electronic Material
2012
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials
2016
A graphene-based broadband optical modulator
2011 StandoutNature
Metal dichalcogenide nanosheets: preparation, properties and applications
2013 Standout
Raman spectroscopy as a versatile tool for studying the properties of graphene
2013 Standout
Fabrication of Flexible MoS2 Thin‐Film Transistor Arrays for Practical Gas‐Sensing Applications
2012
Rediscovering black phosphorus as an anisotropic layered material for optoelectronics and electronics
2014 Standout
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
2012 Standout
A roadmap for graphene
2012 StandoutNatureNobel
3D printing of high-strength aluminium alloys
2017 StandoutNature
Development and characterisation of direct laser sintering multicomponent Cu based metal powder
2006
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser material processing
2011 Standout
2D materials and van der Waals heterostructures
2016 StandoutScienceNobel
Effects of dispersion technique and component ratio on densification and microstructure of multi-component Cu-based metal powder in direct laser sintering
2006
Photothermal therapy and photoacoustic imaging via nanotheranostics in fighting cancer
2018 Standout
Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
2013
Rapid Detection of COVID-19 Causative Virus (SARS-CoV-2) in Human Nasopharyngeal Swab Specimens Using Field-Effect Transistor-Based Biosensor
2020 Standout
Gas flow effects on selective laser melting (SLM) manufacturing performance
2011
All-optical machine learning using diffractive deep neural networks
2018 StandoutScience
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
2010 Standout
Balling phenomena in selective laser melted tungsten
2015
Research on Process and Microstructure Formation of W-Ni-Fe Alloy Fabricated by Selective Laser Melting
2010
Advances in engineering hydrogels
2017 StandoutScience
Graphene Q-switched, tunable fiber laser
2011
A stable, wideband tunable, near transform-limited, graphene-mode-locked, ultrafast laser
2010
Graphene Cathode-Based ZnO Nanowire Hybrid Solar Cells
2012 StandoutNobel
Making Graphene Luminescent by Oxygen Plasma Treatment
2009 StandoutNobel
Single track formation in selective laser melting of metal powders
2010
Surface roughness analysis, modelling and prediction in selective laser melting
2012
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Graphene photonics and optoelectronics
2010 Standout
Emerging Device Applications for Semiconducting Two-Dimensional Transition Metal Dichalcogenides
2014 Standout
Functionalization of Graphene: Covalent and Non-Covalent Approaches, Derivatives and Applications
2012 Standout
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
2003
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
2013
Review of selective laser melting: Materials and applications
2015 Standout
Effect of selective laser melting layout on the quality of stainless steel parts
2012
Graphene Photonics, Plasmonics, and Broadband Optoelectronic Devices
2012 Standout
Selective Laser Melting (SLM) of pure gold
2010
Implant design and production—a new approach by selective laser melting
2005
Carbon-doped mesoporous TiO2 film and its photocatalytic activity
2010
Experimental investigation into selective laser melting of austenitic and martensitic stainless steel powder mixtures
2009
In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
2015
Selective Laser Melting of thin wall parts using pulse shaping
2009
Ultrasensitive Monolayer MoS2 Field-Effect Transistor Based DNA Sensors for Screening of Down Syndrome
2019
Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten
2018
Density Gradient Ultracentrifugation of Nanotubes: Interplay of Bundling and Surfactants Encapsulation
2010
On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing
2014
Development of porous 316L stainless steel with novel structures by selective laser melting
2009
Evolution of Electronic Structure in Atomically Thin Sheets of WS2 and WSe2
2012 Standout
Carbon based materials for electronic bio-sensing
2011
Fabrication of NiTi through additive manufacturing: A review
2016
Heat transfer modelling and stability analysis of selective laser melting
2007
Microstructural Control of Additively Manufactured Metallic Materials
2016
Fabrication of magnesium using selective laser melting technique
2011
Understanding TiO2Photocatalysis: Mechanisms and Materials
2014 Standout
Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications
2007
Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting
2012
Ultrathin Two-Dimensional Nanomaterials
2015 Standout
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
2017
Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe2O3 powder mixture
2012
Raman spectroscopy of graphene-based materials and its applications in related devices
2018 Standout
Surface-Enhanced Raman Spectroscopy of Graphene
2010 StandoutNobel
A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting
2013
Hybrid Processes in Additive Manufacturing
2017
Functionalized MoS2 Nanosheet‐Based Field‐Effect Biosensor for Label‐Free Sensitive Detection of Cancer Marker Proteins in Solution
2014
Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders
2010
Selective laser melting of Inconel 625 using pulse shaping
2010
Lasers in additive manufacturing: A review
2017
Solution processing of graphene, topological insulators and other 2d crystals for ultrafast photonics
2013
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
2013
Laser Repetitive Pulse Heating of Steel Surface: A Material Response to Thermal Loading
2002
Heat treatment of Ti‐6Al‐7Nb components produced by selective laser melting
2008
Graphene based new energy materials
2011 Standout
Materials for additive manufacturing
2017
The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
2011
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
25th Anniversary Article: Organic Field‐Effect Transistors: The Path Beyond Amorphous Silicon
2014 Standout
Selective laser sintering: A qualitative and objective approach
2003
Potential of cold gas dynamic spray as additive manufacturing technology
2013
Multiscale Design and Multiobjective Optimization of Orthopedic Hip Implants with Functionally Graded Cellular Material
2012
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
2015 StandoutScience
Theory of graphene saturable absorption
2017
Processing and microstructure of submicron WC–Co particulate reinforced Cu matrix composites prepared by direct laser sintering
2006
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
2011
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
2016
Graphene-based gas sensors
2013
Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: Evaluation of mechanical properties
2011
Recent Advances in Synthesis and Biomedical Applications of Two‐Dimensional Transition Metal Dichalcogenide Nanosheets
2016
Graphene Plasmonics: A Platform for Strong Light–Matter Interactions
2011 Standout
Graphene-based electronic sensors
2012
Graphene Mode-Locked Ultrafast Laser
2010 Standout
Selective laser melting W–10 wt.% Cu composite powders
2009
Laser melting functionally graded composition of Waspaloy® and Zirconia powders
2007
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
2009
AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting
2015
Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development
2009
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Selective laser melting (SLM) of gold (Au)
2012
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Laser Additive Manufacturing of Modified Implant Surfaces with Osseointegrative Characteristics
2011
Nanostructured Materials for Room‐Temperature Gas Sensors
2015 Standout
Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides
2016 Standout
Selective laser melting of iron-based powder
2004
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
2010 Standout
Additive manufacturing of metals
2016 Standout
Solution‐phase exfoliation of graphite for ultrafast photonics
2010
Microstructures and Mechanical Properties of Stainless Steel AISI 316L Processed by Selective Laser Melting
2014
Surface Morphology in Selective Laser Melting of Metal Powders
2011
25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress
2013 Standout
Works of W O’Neill being referenced
Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels
2005
Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives
2004
High density net shape components by direct laser re-melting of single-phase powders
2002
Cold spray nozzle design and performance evaluation using particle image velocimetry
2005
The production of copper parts using DMLR
2003
The direct metal laser remelting of copper and tool steel powders
2004
The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting
2009
The direct metal laser remelting of copper and tool steel powders
2004
New developments in laser-assisted oxygen cutting
2000
Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication
2006
A three-dimensional analysis of gas entrainment operating during the laser-cutting process
1995
Investigation on Multi-Layer Direct Metal Laser Sintering of 316L Stainless Steel Powder Beds
1999
Carbon Nanostructure-Based Field-Effect Transistors for Label-Free Chemical/Biological Sensors
2010
Experimental investigation of nanosecond pulsed Nd:YAG laser re‐melted pre‐placed powder beds
2001
Direct Selective Laser Sintering of Tool Steel Powders to High Density: Part A - Effects of Laser Beam Width and Scan Strategy
2003
Soft-lithographic processed soluble micropatterns of reduced graphene oxide for wafer-scale thin film transistors and gas sensors
2011
A compact, high power, ultrafast laser mode-locked by carbon nanotubes
2009
The effect of varying laser scanning speed on DMLR processed metal parts
2003
Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray
2004
Investigation of Short Pulse Nd:YAG Laser Interaction with Stainless Steel Powder Beds
1998
Direct metal laser re-melting (DMLR) of 316L stainless steel powder. Part 1:Analysis of thin wall structures
2001