Citation Impact
Citing Papers
The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review
2018
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Support Structures for Additive Manufacturing: A Review
2018 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials
2016
Selective laser melting: A unit cell approach for the manufacture of porous, titanium, bone in‐growth constructs, suitable for orthopedic applications. II. Randomized structures
2009
Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants
2013
Advancements in CAD/CAM technology: Options for practical implementation
2016 Standout
Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
2015
Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments
2010
Bone regeneration performance of surface-treated porous titanium
2014
Fabrication of titanium alloy frameworks for complete dentures by selective laser melting
2014
3D printed versus conventionally cured provisional crown and bridge dental materials
2017 Standout
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
2013
Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
2009
The future of dental devices is digital
2011 Standout
Characterizations of additive manufactured porous titanium implants
2012
Do revision total hip augments provide appropriate modularity?
2015
3D printing in dentistry
2015 Standout
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials
2014
Three-dimensional modelling of auxetic sandwich panels for localised impact resistance
2015
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
2019
Experimental-assisted design development for an octahedral cellular structure using additive manufacturing
2015
Laser deposited coatings of Co-Cr-Mo onto Ti-6Al-4V and SS316L substrates for biomedical applications
2013
Auxetic metamaterials and structures: a review
2018 Standout
Gas flow effects on selective laser melting (SLM) manufacturing performance
2011
Metallurgical and mechanical characterisation of titanium based materials for endosseous applications obtained by selective laser melting
2012
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Advances in engineering hydrogels
2017 StandoutScience
Drop weight impact behaviour of sandwich panels with metallic micro lattice cores
2013
A Review of Additive Manufacturing
2012 Standout
Evaluations of cellular lattice structures manufactured using selective laser melting
2012
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Review of selective laser melting: Materials and applications
2015 Standout
Study on the designing rules and processability of porous structure based on selective laser melting (SLM)
2013
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
2015 Standout
The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting
2009
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
ADDITIVE MANUFACTURING TECHNOLOGY APPLICATIONS TARGETING PRACTICAL SURGERY
2013
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
2021
Analysis and optimisation of vertical surface roughness in micro selective laser melting
2015
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
2014 Standout
Characterization of microstructure and residual stress in a 3D H13 tool steel component produced by additive manufacturing
2014
SLM lattice structures: Properties, performance, applications and challenges
2019
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Microstructure of selective laser melted nickel–titanium
2014
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Energy absorption in lattice structures in dynamics: Experiments
2015
Volumetric additive manufacturing via tomographic reconstruction
2019 StandoutScience
An investigation into the compressive properties of stainless steel micro-lattice structures
2010
A review of powder additive manufacturing processes for metallic biomaterials
2017
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V
2013
Selective laser melting of aluminium components
2010
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
2012 Standout
Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering
2015
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
2015
Process parameter optimization and mechanical properties for additively manufactured stainless steel 316L parts by selective electron beam melting
2018
The design of impact absorbing structures for additive manufacture
2012
Metallic implant biomaterials
2014 Standout
Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting
2011
Scaffold Library for Tissue Engineering: A Geometric Evaluation
2012
Manufacturing and processing of NiTi implants: A review
2011
Review of current trends in research and applications of sandwich structures
2018 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting
2013
Rapid prototyped porous nickel–titanium scaffolds as bone substitutes
2014
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting
2011
Laser Additive Manufacturing of Modified Implant Surfaces with Osseointegrative Characteristics
2011
Auxetic mechanical metamaterials
2017 Standout
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting
2013
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Additive manufacturing of metals
2016 Standout
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
2014 Standout
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
2016
Surface Morphology in Selective Laser Melting of Metal Powders
2011
Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
2015
Works of W. Brooks being referenced
Crush Behaviour Of Open Cellular LatticeStructures Manufactured UsingSelective Laser Melting
2006
Selective Laser Melting: A regular unit cell approach for the manufacture of porous, titanium, bone in‐growth constructs, suitable for orthopedic applications
2008
Local Effects during Indentation of Fully Supported Sandwich Panels with Micro Lattice Cores
2008
The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
2010
Comparison of the Drop Weight Impact Performance of Sandwich Panels with Aluminium Honeycomb and Titanium Alloy Micro Lattice Cores
2010