Citation Impact
Citing Papers
Massively parallel manipulation of single cells and microparticles using optical images
2005 StandoutNature
DNA-barcode directed capture and electrochemical metabolic analysis of single mammalian cells on a microelectrode array
2009 StandoutNobel
Biodegradable luminescent porous silicon nanoparticles for in vivo applications
2009 Standout
Applications of dielectrophoresis in biotechnology
1997
Controlling Brownian motion of single protein molecules and single fluorophores in aqueous buffer
2008 StandoutNobel
Particle separation by dielectrophoresis
2002
Pumping of liquids with ac voltages applied to asymmetric pairs of microelectrodes
2003
Holding Forces of Single-Particle Dielectrophoretic Traps
2001
Integrating microfabricated fluidic systems and NMR spectroscopy
2000
Mesoporous Silicon in Drug Delivery Applications
2007
Review of titanium surface modification techniques and coatings for antibacterial applications
2018 Standout
Transparent and attachable ionic communicators based on self-cleanable triboelectric nanogenerators
2018
Microfluidic diagnostic technologies for global public health
2006 StandoutNature
Fluid flow induced by nonuniform ac electric fields in electrolytes on microelectrodes. III. Observation of streamlines and numerical simulation
2002
Review: Semiconductor Piezoresistance for Microsystems
2009
Preparation of flexible resistive micro-humidity sensors and their humidity-sensing properties
2013
Novel flexible resistive-type humidity sensor
2006
Design of multiphysics actuators using topology optimization – Part II: Two-material structures
2001
Topology optimization approaches
2013 Standout
A review on g-C 3 N 4 -based photocatalysts
2016 Standout
VOC oxidation in excess of oxygen using flow-through catalytic membrane reactor
2016
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
2008 Standout
An Integrated Microfabricated Cell Sorter
2002 StandoutNobel
Processing and formulation of inkjet printable conducting polyaniline based ink for low cost, flexible humidity sensors using untreated polymeric substrate
2012
Flexible humidity sensor based on TiO2 nanoparticles-polypyrrole-poly-[3-(methacrylamino)propyl] trimethyl ammonium chloride composite materials
2007
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Microfluidics: Fluid physics at the nanoliter scale
2005 Standout
Two-photon direct laser writing of ultracompact multi-lens objectives
2016 Standout
A two-chip interface for a MEMS accelerometer
2002 StandoutNobel
Dielectrophoretic Assembly of Metallodielectric Janus Particles in AC Electric Fields
2008
A three-dimensional dielectrophoretic particle focusing channel for microcytometry applications
2005
Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors
2015 Standout
Hybrid photocatalysts using graphitic carbon nitride/cadmium sulfide/reduced graphene oxide (g-C3N4/CdS/RGO) for superior photodegradation of organic pollutants under UV and visible light
2014
Method for trapping and manipulating nanoscale objects in solution
2005 StandoutNobel
The emergence and prospects of deep-ultraviolet light-emitting diode technologies
2019 StandoutNobel
Polymer MEMS Actuators for Underwater Micromanipulation
2004
An Introduction to Microelectromechanical Systems Engineering
2002
Separation of erythrocytes and latex beads by dielectrophoretic levitation and hyperlayer field-flow fractionation.
1998
Energy harvesting vibration sources for microsystems applications
2006 Standout
A robust superhydrophobic and superoleophobic surface with inverse-trapezoidal microstructures on a large transparent flexible substrate
2010
High-Speed Porous Thin Film Humidity Sensors
2002
MICRO-ELECTRO-MECHANICAL-SYSTEMS (MEMS) AND FLUID FLOWS
1998 Standout
Fully transparent and flexible humidity sensors fabricated by layer-by-layer self-assembly of thin film of poly(2-acrylamido-2-methylpropane sulfonate) and its salt complex
2010
High‐Performance Microring Resonators Fabricated with Multiphoton Absorption Polymerization
2008
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
A stretchable temperature sensor based on elastically buckled thin film devices on elastomeric substrates
2009
Monolithic Microfabricated Valves and Pumps by Multilayer Soft Lithography
2000 StandoutScience
Remedying Defects in Carbon Nitride To Improve both Photooxidation and H2 Generation Efficiencies
2016
Hydrogel bioelectronics
2018 Standout
Feasibility of micro power supplies for MEMS
1997
Large-area travelling-wave dielectrophoresis particle separator
1997
Polymeric Photocatalysts Based on Graphitic Carbon Nitride
2015 Standout
Large-Scale Single-Cell Trapping And Imaging Using Microwell Arrays
2005
Transport phenomena in nanofluidics
2008 Standout
Jet printing of convex and concave polymer micro-lenses
2015
Design of multiphysics actuators using topology optimization – Part I: One-material structures
2001 Standout
A Novel Pump for MEMS Applications
1996
Recent achievements in miniaturised humidity sensors—a review of transduction techniques
2002
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare
2016 Standout
Microrobots and micromechanical systems
1989
Optical gas sensing: a review
2012
Robust self-cleaning surfaces that function when exposed to either air or oil
2015 StandoutScience
Unconventional Methods for Fabricating and Patterning Nanostructures
1999 Standout
Cellular Microfabrication: Observing Intercellular Interactions Using Lithographically-Defined DNA Capture Sequences
2012 StandoutNobel
Cell handling and characterization using micron and submicron electrode arrays: state of the art and perspectives of semiconductor microtools
1995
Metal oxide-based gas sensor research: How to?
2006 Standout
Low temperature bonding for microfabrication of chemical analysis devices
1997
Stretchable, Skin‐Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
2016 Standout
Comparison of three humidity sensors for a pulmonary function diagnosis microsystem
2002
Continuous inertial focusing, ordering, and separation of particles in microchannels
2007 Standout
Constructing single- and multiple-helical microcoils and characterizing their performance as components of microinductors and microelectromagnets
1997
Ag/PEPC/NiPc/ZnO/Ag thin film capacitive and resistive humidity sensors
2010
MEMS-Micropumps: A Review
2002
Triboelectric Charging Sequence Induced by Surface Functionalization as a Method To Fabricate High Performance Triboelectric Generators
2015
New directions in single-molecule imaging and analysis
2007 StandoutNobel
Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?
2016 Standout
Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip
1993 StandoutScience
A micromachined resistive-type humidity sensor with a composite material as sensitive film
2005
Soft Robotic Grippers
2018 Standout
Applications of 2D MXenes in energy conversion and storage systems
2018 Standout
Review of Microscale Magnetic Power Generation
2007
Cocatalysts for Selective Photoreduction of CO2into Solar Fuels
2019 Standout
Amine-Functionalized ZnO Nanosheets for Efficient CO2 Capture and Photoreduction
2015
Mimicking Both Petal and Lotus Effects on a Single Silicon Substrate by Tuning the Wettability of Nanostructured Surfaces
2011
The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture
1999 Standout
Functional hydrogel structures for autonomous flow control inside microfluidic channels
2000 StandoutNature
Analysis of Viscous Micropumps and Microturbines
1998
Nanoarchitectures in dye-sensitized solar cells: metal oxides, oxide perovskites and carbon-based materials
2018
A MEMS toolkit for metal-oxide-based gas sensing systems
2003
Bonding of glass-based microfluidic chips at low- or room-temperature in routine laboratory
2006
A nanowire WO3 humidity sensor integrated with micro-heater and inverting amplifier circuit on chip manufactured using CMOS-MEMS technique
2006
REVIEW: MEMS and Its Applications for Flow Control
1996
ELECTRICAL FORCES FOR MICROSCALE CELL MANIPULATION
2006
High-Performance, Low-Voltage, and Easy-Operable Bending Actuator Based on Aligned Carbon Nanotube/Polymer Composites
2011
Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review
2014 Standout
Directed Self-Assembly of Nanoparticles
2010 Standout
Microfabricated electrohydrodynamic pumps
1990
Controlled Flight of a Biologically Inspired, Insect-Scale Robot
2013 StandoutScience
A Humidity Sensing Organic-Inorganic Composite for Environmental Monitoring
2013
Recent Advances in the Catalytic Oxidation of Volatile Organic Compounds: A Review Based on Pollutant Sorts and Sources
2019 Standout
Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio
1997 Standout
Micromachined inertial sensors
1998 Standout
Poly(dimethylsiloxane) as a Material for Fabricating Microfluidic Devices
2002 Standout
Recent advances in flexible and stretchable electronic devices via electrospinning
2013
Travelling wave-driven microfabricated electrohydrodynamic pumps for liquids
1994
Gold nanoparticle modified graphitic carbon nitride/multi-walled carbon nanotube (g-C3N4/CNTs/Au) hybrid photocatalysts for effective water splitting and degradation
2015
Soft Lithography in Biology and Biochemistry
2001 Standout
Silicon in mechanical sensors
1988
Plasma source ion-implantation technique for surface modification of materials
1987
25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress
2013 Standout
Works of W. Benecke being referenced
Levitation, holding, and rotation of cells within traps made by high-frequency fields
1992
Design and fabrication of a thermal infrared emitter
1996
Microlens array production in a microtechnological dry etch and reflow process for display applications
2012
A monitoring instrument with capacitive porous silicon humidity sensors
2000
Silicon-microactuators: activation mechanisms and scaling problems
1991
Thermal stability of vapor phase deposited self-assembled monolayers for MEMS anti-stiction
2006
TMAHW etchants for silicon micromachining
1991
Toward Flexible Thermoelectric Flow Sensors: A New Technological Approach
2008
Optically Excited And Interrogated Micromechanical Silicon Cantilever Structure
1987
Thermally excited silicon microactuators
1988
NH4Oh-based etchants for silicon micromachining
1990
Gas mixture analysis using silicon micro-reactor systems
2000
Low-temperature silicon wafer bonding
1992
Direct Growth of Freestanding ZnO Tetrapod Networks for Multifunctional Applications in Photocatalysis, UV Photodetection, and Gas Sensing
2015
Permanent magnet micromotors on silicon substrates
1993
Micro membrane reactor: a flow-through membrane for gas pre-combustion
2002
Microfabricated electrohydrodynamic (EHD) pumps for liquids of higher conductivity
1992
A smart accelerometer with on-chip electronics fabricated by a commercial CMOS process
1992
Single Step Integration of ZnO Nano- and Microneedles in Si Trenches by Novel Flame Transport Approach: Whispering Gallery Modes and Photocatalytic Properties
2014
Quasianalog Accelerometer Using Microswitch Array
2005
New porous silicon formation technology using internal current generation with galvanic elements
2001
A novel surface-micromachined capacitive porous silicon humidity sensor
2000
NH4OH-based etchants for silicon micromachining: Influence of additives and stability of passivation layers
1990
Vapor-Phase Self-Assembled Monolayers for Anti-Stiction Applications in MEMS
2007
Microactuators with moving magnets for linear, torsional or multiaxial motion
1992
Tribo-enhanced diffusion of nitrogen implanted into steel
1985