Citation Impact
Citing Papers
A critical review of the influence of hydrogen on the mechanical properties of medium-strength steels
2013
Materials and corrosion trends in offshore and subsea oil and gas production
2017
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
The plastic in microplastics: A review
2017 Standout
A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels
2013 Standout
Thermometry at the nanoscale
2012 Standout
Microplastics in the marine environment
2011 Standout
Continuum damage model for bioresorbable magnesium alloy devices — Application to coronary stents
2010
Molybdenum, Molybdenum Oxides, and their Electrochemistry
2012
The physical impacts of microplastics on marine organisms: A review
2013 Standout
Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys
2008
Recent developments in stainless steels
2009 Standout
Investigations on the effect of complexation of NaF salt with polymer blend (PEO/PVP) electrolytes on ionic conductivity and optical energy band gaps
2011
Using high-temperature mechanochemistry treatment to modify iron oxide and improve the corrosion performance of epoxy coating – II. Effect of grinding temperature
2014
Fouling and stability of polymers and composites in marine environment
2010
A critical review of high entropy alloys and related concepts
2016 Standout
Microstructural evolution and corrosion behavior of friction stir processed fine‐grained AZ80 Mg alloy
2019
Recent advances in the development of aerospace materials
2018
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Hydrogen Embrittlement of Magnesium and Magnesium Alloys: A Review
2013
Enhancing pitting corrosion resistance of AlxCrFe1.5MnNi0.5 high-entropy alloys by anodic treatment in sulfuric acid
2008
The influence of applied stress rate on the stress corrosion cracking of 4340 and 3.5NiCrMoV steels in distilled water at 30°C
2009
Eyeriss: An Energy-Efficient Reconfigurable Accelerator for Deep Convolutional Neural Networks
2016 Standout
Corrosion Resistance and Durability of Superhydrophobic Surface Formed on Magnesium Alloy Coated with Nanostructured Cerium Oxide Film and Fluoroalkylsilane Molecules in Corrosive NaCl Aqueous Solution
2011
Friction Stir Welding of Al Alloy 2219-T8: Part I-Evolution of Precipitates and Formation of Abnormal Al2Cu Agglomerates
2016
Passive films on stainless steels—chemistry, structure and growth
2003 Standout
Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: A review
2018 Standout
Development of nano SiO2 incorporated nano zinc phosphate coatings on mild steel
2015
Calculated phase diagrams and the corrosion of die-cast Mg–Al alloys
2008
Solidification Map of a Nickel-Base Alloy
2013
Enhancement of barrier and corrosion protection performance of an epoxy coating through wet transfer of amino functionalized graphene oxide
2015 Standout
The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review
2014
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Advances in waterborne polymer/carbon material composites for electromagnetic interference shielding
2021 Standout
Influence of hydrogen on mechanical properties and fracture of tempered 13 wt% Cr martensitic stainless steel
2017
Toward the Application of High Frequency Electromagnetic Wave Absorption by Carbon Nanostructures
2019 Standout
Evaluation of Ginkgo leaf extract as an eco-friendly corrosion inhibitor of X70 steel in HCl solution
2018 Standout
Corrosion behaviour of investment cast and friction stir processed Ti–6Al–4V
2010
Anti-corrosion microarc oxidation coatings on SiCP/AZ31 magnesium matrix composite
2009
The microstructure, mechanical and friction properties of protective diamond like carbon films on magnesium alloy
2011
Improved microwave absorption and electromagnetic interference shielding properties based on graphene–barium titanate and polyvinylidene fluoride with varying content
2017
Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3 wt.% NaCl solution
2014
Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics
2012 Standout
Polyaniline–antimony oxide composites for effective broadband EMI shielding
2013
Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges
2013
Hot corrosion behavior of Co modified NiAl coating on nickel base superalloys
2012
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
Nitrogen ion implantation and in vitro corrosion behavior of as-cast Ti–6Al–7Nb alloy
2002
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
2013 Standout
Electromagnetic interference shielding behavior of poly(trimethylene terephthalate)/multi-walled carbon nanotube composites
2011
Influence of K2CrO4Doping on the Structural, Optical and Dielectric Properties of Polyvinyl Alcohol/K2CrO4Composite Films
2015
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
2010 Standout
Dependence of Dielectric Properties and Percolative Behavior on Phase Separation Structure Induced by Heterogeneous Carbon Nanofiber Distribution in Polymer Blend Nanocomposites
2011
Mechanical properties of Fe–Al–M–C (M=Ti, V, Nb, Ta) alloys with strengthening carbides and Laves phase
2005
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
2012 Standout
Corrosion mechanism applicable to biodegradable magnesium implants
2011
Influence of microstructural changes on corrosion behaviour of thermally aged Ti‐6Al‐7Nb alloy
2004
The effect of hydrogen embrittlement on the mechanical properties of aluminum alloy
2015
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Corrosion of ultra-high-purity Mg in 3.5% NaCl solution saturated with Mg(OH)2
2013
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
2013 Standout
Additive manufacturing of steels: a review of achievements and challenges
2020
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
Degradation Rates of Plastics in the Environment
2020 Standout
Overview of carbon nanostructures and nanocomposites for electromagnetic wave shielding
2018 Standout
Plasma electrolytic oxidation coatings with particle additions – A review
2016
Influence of Hydrogen on Steel Components for Clean Energy
2018
Gold Nanoparticles in Chemical and Biological Sensing
2012 Standout
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
2019 Standout
Biodegradable metals
2014 Standout
Hydrogen embrittlement and rock bolt stress corrosion cracking
2008
Synthesis of flake shaped carbonyl iron/reduced graphene oxide/polyvinyl pyrrolidone ternary nanocomposites and their microwave absorbing properties
2016
Au nanoparticles in PMMA matrix: In situ synthesis and the effect of Au nanoparticles on PMMA conductivity
2010
Evaluation of automobile service performance using laboratory testing
2018
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
2015 Standout
Corrosion Behavior of Friction Stir-Processed and Gas Tungsten Arc-Welded Ti-6Al-4V
2010
Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids
2009
EMI shielding effectiveness of carbon based nanostructured polymeric materials: A comparative study
2013 Standout
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
2016 StandoutScience
Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study
2014 Standout
Dielectric properties and electromagnetic interference shielding effectiveness of graphene-based biodegradable nanocomposites
2016
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior
2017 Standout
Hydrogen embrittlement in different materials: A review
2018 Standout
Does size and buoyancy affect the long-distance transport of floating debris?
2015 Standout
An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing
2009
Annealing induced recovery of long-term thermal aging embrittlement in a duplex stainless steel
2012
A review of surfactants as corrosion inhibitors and associated modeling
2017 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Metallic implant biomaterials
2014 Standout
Formation Mechanism and Properties of Titanate Conversion Coating on AZ31 Magnesium Alloy
2012
Impedance spectroscopic studies of nickel nanocluster in silica matrix synthesized by sol–gel method
2006
Corrosion inhibition of mild steel in acidic solution by Tagetes erecta (Marigold flower) extract as a green inhibitor
2014
Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
2014
Hexaferrite/polyethylene composite coatings prepared with flame spraying
2010
Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing
2012 Standout
Graphene family, and their hybrid structures for electromagnetic interference shielding applications: Recent trends and prospects
2021 Standout
Corrosion protection of magnesium AZ31 alloy using poly(ether imide) [PEI] coatings prepared by the dip coating method: Influence of solvent and substrate pre-treatment
2010
Mechanisms and Kinetics of Environmentally Assisted Cracking: Current Status, Issues, and Suggestions for Further Work
2012
Hydrogen in energy transition: A review
2021 Standout
Impedance spectroscopy, ionic conductivity and dielectric studies of new Li+ ion conducting polymer blend electrolytes based on biodegradable polymers for solid state battery applications
2016
Influence of microstructure and alloying elements on corrosion behavior of Ti–13Nb–13Zr alloy
2003
Biodegradable Mg and Mg alloys: Corrosion and biocompatibility
2011
Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials
2013 Standout
Structural, electrical and optical properties of pure and NaLaF4 doped PEO polymer electrolyte films
2007
Hydrogen Embrittlement of Industrial Components: Prediction, Prevention, and Models
2016
Biofouling and stability of synthetic polymers in sea water
2009
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
High-Entropy Alloys: A Critical Review
2014 Standout
Works of V.S. Raja being referenced
Stress corrosion cracking
2011
Stress Corrosion Cracking Behavior of Multipass TIG-Welded AA2219 Aluminum Alloy in 3.5 wt pct NaCl Solution
2012
Impedance spectroscopic and dielectric analysis of PMMA-CO-P4VPNO polymer films
2004
Comparing Reactivation Behavior of TIG and Laser Beam Welded Alloy 690
2012
Thermally sprayable polyethylene coatings for marine environment
2007
Influence of Heat Treatment and Scandium Addition on the Electrochemical Polarization Behavior of Al-Zn-Mg-Cu-Zr Alloy
2007
Ionic conductivity and discharge characteristics of solid-state battery based on novel polymer electrolyte (PEO+NaBiF4)
2005
The role of anions in the formation and corrosion resistance of the plasma electrolytic oxidation coatings
2009
An Alternative Explanation for the Apparent Passivation of Molybdenum in 1 mol/L Hydrochloric Acid
2001
Hydrogen embrittlement susceptibility of over aged 7010 Al-alloy
2006
A Comparative Study of Semiconducting Behavior of Passive Film of High Nitrogen and Ni and Mn Free Stainless Steels in 3.5 wt. % NaCl
2013
Influence of curing temperature, silica nanoparticles- and cerium on surface morphology and corrosion behaviour of hybrid silane coatings on mild steel
2009
Hot corrosion of YSZ/Al2O3 dispersed NiCrAlY plasma-sprayed coatings in Na2SO4–10 wt.% NaCl melt
2010
Anodic Polarization and Surface Composition of Fe-16Al-0.14C Alloy in 0.25 M Sulfuric Acid
2003
The self regulating nature of In on the potential of Al in 3.5% NaCl solution
1997
Long-term sulfidation behaviour of Fe3Al-Fe3AlC0.69 iron aluminides
2003
A comparative study of stress-corrosion cracking behaviour of three manganese-containing stainless steels in boiling MgCl2 solution
1995
Role of chlorides on pitting and hydrogen embrittlement of Mg–Mn wrought alloy
2013
Low temperature thermal aging of austenitic stainless steel welds: Kinetics and effects on mechanical properties
2011
Low temperature embrittlement of duplex stainless steel: Correlation between mechanical and electrochemical behavior
2010
Environmentally assisted cracking behaviour of Al–Zn–Mg–Cu–Cr alloy bonded with polymer matrix composite stiffener
2013
Electrochemical impedance behavior of graphite-dispersed electrically conducting acrylic coating on AZ31 magnesium alloy in 3.5wt.% NaCl solution
2009
Effect of Molybdenum and Silicon on the Electrochemical Corrosion Behavior of FeNiB Metallic Glasses
1988
Characterisation of stress corrosion cracking (SCC) of Mg–Al alloys
2007
Electrochemical impedance study of thermally sprayable polyethylene coatings
2008
Study of the structure and corrosion behavior of PEO coatings on AM50 magnesium alloy by electrochemical impedance spectroscopy
2008
Effect of Widmanstatten Structure on Protection Potential of Ti-6Al-2Sn-4Zr-2Mo (0.1Si) Alloy in 1 M NaBr Solution
1993
AC impedance study on the activation mechanism of aluminium by indium and zinc in 3.5% NaCl medium
1997
Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel
2013