Citation Impact
Citing Papers
Elastic/Plastic Indentation Damage in Ceramics: The Lateral Crack System
1982 Standout
Carbon scaffolding: building acetylenic all-carbon and carbon-rich compounds
1994 Nature
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
Synthesis, processing and properties of conjugated polymer networks
2005
Poisson's ratio and modern materials
2011 Standout
Cyclobutadiene Complexes, XII. Alkynyl‐Substituted Tricarbonyl(cyclobutadiene)iron Complexes: Stille Coupling of Iodocyclobutadiene Complexes with Stannylalkynes
1996
Indentation fracture: principles and applications
1975
Mechanical characterization of a polysiloxane-derived SiOC glass
2006
Fatigue-crack growth and fracture properties of coarse and fine-grained Ti3SiC2
2000
Emerging Engineered Wood for Building Applications
2022 Standout
Spezifische Phenyl‐Perfluorphenyl‐Stapelwechselwirkungen: eine neue Strategie zum Aufbau supramolekularer Strukturen
1997 StandoutNobel
Oligo(triacetylene) Derivatives with Pendant Long Alkyl Chains
2004
Structure and properties of the superelastic and hard carbon particles reinforcing wear-resistant composite materials obtained from mixtures of iron and fullerene powders under pressure
2008
Stress generation and relief in growingoxide films
1970
Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices
2009 Standout
Stresses generated during oxidation sequences and high temperature fracture
1994
The influence of yttrium additions on the oxide-scale adhesion to an iron-chromium-aluminum alloy
1976
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings
2001 StandoutNobel
On the mechanics of delamination and spalling in compressed films
1984 Standout
Photoelastic stress studies and their application to a mechanical analysis of the tertiary ring-complex of Ardnamurchan, Argyllshire
1967
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Recent developments in the chemistry of halogen-free flame retardant polymers
2002 Standout
Subcritical crack growth in geological materials
1984 Standout
A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack Measurements
1981 Standout
The Formation of Flakes
1987 Standout
Elastic and plastic properties of GaN determined by nano-indentation of bulk crystal
1999 Standout
The MN+1AXN phases: A new class of solids
2000 Standout
Computational modelling of impact damage in brittle materials
1996 Standout
Molecular Mosaics Formed by a Square Cyclophane and Its Inclusion Complex with Ferrocene
1995 StandoutNobel
General relationship between strength and hardness
2011 Standout
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
Synthetic Approaches toward Molecular and Polymeric Carbon Allotropes
1992
Quasi-static solid particle damage in brittle solids—I. Observations analysis and implications
1976 Standout
Nonmetallic crystals with high thermal conductivity
1973 Standout
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
An overview of the machinability of aeroengine alloys
2003 Standout
The Sonogashira Reaction: A Booming Methodology in Synthetic Organic Chemistry
2007 Standout
Chemical processes in glass polishing
1990 Standout
Synthesis and optical properties of some novel arylene‐alkynylene polymers
1995
Crystallization in anodic oxide films
1988
Indentation strain burst phenomenon induced by grain boundaries in niobium
2004
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Microstructure and wear behavior of metal-containing diamond-like coatings
1991
Microstructural and mechanical characteristics of in situ metal matrix composites
2000 Standout
Energy principle of the indentation-induced inelastic surface deformation and hardness of brittle materials
1993
Microstructure, adhesion and growth kinetics of protective scales on metals and alloys
1982
Mechanical properties of adhesives for bonding wood—A review
2013
Diacetylenes in polymeric systems
1995
On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour
2000 Standout
Novel Zirconia Materials in Dentistry
2017 Standout
Surface hardness and transparency of poly(methyl methacrylate)‐silica coat film derived from perhydropolysilazane
2007
Supramolecular Helical Systems: Helical Assemblies of Small Molecules, Foldamers, and Polymers with Chiral Amplification and Their Functions
2016 Standout
Aerobic Copper-Catalyzed Organic Reactions
2013 Standout
Properties and microstructures of Lanxide� Al2O3-Al ceramic composite materials
1989
Evaluation ofK Ic of brittle solids by the indentation method with low crack-to-indent ratios
1982 Standout
Elastic/Plastic Indentation Damage in Ceramics: The Median/Radial Crack System
1980 Standout
Molecular Rods. 1. Simple Axial Rods
1999 Standout
Indentation behaviour of superelastic hard carbon
2016 StandoutNobel
The modelling of growth stresses during high-temperature oxidation
1994
A critical account on π–π stacking in metal complexes with aromatic nitrogen-containing ligands †
2000 Standout
The growth of large diamond crystals
1972
Broad Family of Carbon Nanoallotropes: Classification, Chemistry, and Applications of Fullerenes, Carbon Dots, Nanotubes, Graphene, Nanodiamonds, and Combined Superstructures
2015 Standout
Stress-induced breakdown during galvanostatic anodising of zirconium
2010
Organometallic Conjugated Polymer Networks
2007
Phenyl–Perfluorophenyl Stacking Interactions: A New Strategy for Supermolecule Construction
1997 StandoutNobel
Structure and properties of superelastic hard carbon phase created in fullerene-metal composites by high temperature-high pressure treatment
2012 StandoutNobel
Wear mechanisms of ultra-hard cutting tools materials
2001
Polymers with Complexed Cyclobutadiene Units in the Main Chain: The First Example of a Thermotropic, Liquid Crystalline Organometallic Polymer
1995
Scaling, dimensional analysis, and indentation measurements
2004
Indentation of Ceramics with Spheres: A Century after Hertz
1998
Molekulare Mosaiken – ein quadratisches Cyclophan und sein Einschlußkomplex mit Ferrocen
1995 StandoutNobel
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
2010 Standout
Poly(aryleneethynylene)s: Syntheses, Properties, Structures, and Applications
2000 Standout
Strength and fracture properties of diamond
1981
The nature, ascent and emplacement of granitic magmas
1979 Standout
Instrumentation of a conventional hardness tester for load-displacement measurement during indentation
1990
Probing material properties with sharp indenters: a retrospective
2011
Synthesis and Testing of Nonhalogenated Alkyne-Containing Flame-Retarding Polymer Additives
1998
Self-Assembly and Self-Organization of Self-Recognizing Cyclophanes
1998 StandoutNobel
Organometallic Conjugated Polymer Networks
2006
Computational modeling of the forward and reverse problems in instrumented sharp indentation
2001 Standout
Surface Damage Resistance of Gel‐Derived Oxycarbide Glasses: Hardness, Toughness, and Scratchability
2001
The First Complex with a Tetraethynylcyclobutadiene Ligand
1993
Contact Damage Accumulation in Tic 3 SiC 2
1998
High temperature oxidation of iron-manganese-aluminum based alloys
1984
Organophosphorus π-Conjugated Materials
2006 Standout
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
2014 Standout
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
2009 Standout
Works of V.R. Howes being referenced
Pressure crack-figures on diamond faces II. The dodecahedral and cubic faces
1955
Pressure crack-figures on diamond faces I. The octahedral face
1955
Observations of the metal oxide interface for a Fe-Cr alloy
1968
Oxide growth and spall1ng on Fe-Cr alloys studied by hot stage microscopy
1968
The Critical Stress for the Production of Pressure Crack Figures on Diamond Faces
1959
Hypercrosslinked organic solids: preparation from poly(aromatic diacetylenes) and preliminary measurements of their Young's modulus, hardness, and thermal stability
1988
Metal Transport in Voids at Metal-Oxide Interfaces
1969
A Strength-Area Relationship for Diamond
1962
Induction of Ring Cracks on Diamond Surfaces
1957
Optical Studies of Ring Cracks on Glass
1954
Elastic recovery at hardness indentations
1981
The initial stresses developed during high temperature oxidation of Fe-Cr alloys
1969
The effect of growth rate on anodically formed zirconium oxide films
1974
Microhardness of NaCl Bicrystals
1982
Multiple slip in diamond due to a nominal contact pressure of 10 GPa at 1,000 °C
1988 Nature