Standout Papers
Citation Impact
Citing Papers
Nucleation mechanisms of dynamic recrystallization in Inconel 625 superalloy deformed with different strain rates
2012
Comprehensive computational design of ordered peptide macrocycles
2017 StandoutScienceNobel
Age hardening of an Fe-Ti-Si alloy
1972
Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes
2015
LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales
2021 Standout
Work hardening and dynamical recovery of F.C.C. metals in multiple glide
1989
A constitutive model for hcp materials deforming by slip and twinning
2003
Dislocation density-based modeling of deformation behavior of aluminium under equal channel angular pressing
2003
A framework for numerical integration of crystal elasto-plastic constitutive equations compatible with explicit finite element codes
2007
Dynamic Recrystallization in Pure Magnesium
2001
Multi-Phase-Field Model to Simulate Microstructure Evolutions during Dynamic Recrystallization
2008
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Anchor extension: a structure-guided approach to design cyclic peptides targeting enzyme active sites
2021 StandoutNobel
Probing the limits of metal plasticity with molecular dynamics simulations
2017 Nature
Dual-phase nanostructuring as a route to high-strength magnesium alloys
2017 Nature
High tensile ductility in a nanostructured metal
2002 StandoutNature
Bioinspired structural materials
2014 Standout
Hardening stages of [112] copper single crystals at intermediate and high temperatures—I. Mechanical behaviour
1993
Size-affected single-slip behavior of pure nickel microcrystals
2005
Spectral calibration of crystal plasticity models
2006
Tensile deformation behavior of high manganese austenitic steel: The role of grain size
2010
A dislocation-based model for all hardening stages in large strain deformation
1998
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
2004
The effect of friction stir processing on the microstructure and mechanical properties of equal channel angular pressed 5052Al alloy sheet
2011
Plastic instabilities: phenomenology and theory
1991
Subgrain distributions in aluminium deformed under hot working conditions
1995
Activation energy calculations for discontinuous yielding in Inconel 718SPF
2001
Orientation dependence of stored energy of cold work in 50% cold rolled copper
1984
A critical review of high entropy alloys and related concepts
2016 Standout
Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper
2008
On the experimental characterization of crystal plasticity in polycrystals
2002
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
Deformation microstructure and orientation of f.c.c. crystals
1995
Microstructure and flow stress of polycrystals and single crystals
1998
Deformation structure and nucleation of dynamic recrystallization in copper single crystals
1983
On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals
2004
Embedded polycrystal plasticity and adaptive sampling
2007
A dispersion strengthening model based on differing elastic moduli applied to the iron-copper system
1972
Modeling of aluminum via filling by forcefill
2003
Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet
2006
Study on the orientational stability of cube-oriented FCC crystals under plane strain by use of a texture component crystal plasticity finite element method
2004
On the prediction of yield surfaces by the crystal plasticity models for fcc polycrystals
2000
Twinning and strain-induced f.c.c. → h.c.p. transformation on the mechanical properties of CoNiCrMo alloys
1976
Microstructural evolution of a 304-type austenitic stainless steel during rolling at temperatures of 773–1273 K
2014
The origin of the shear stress increment in aged ferritic Fe-Ni-Ti-Al alloys
1976
Simulation of stored energy and orientation gradients in cold-rolled interstitial free steels
2003
Dislocation annihilation in plastic deformation: II. Kocks–Mecking Analysis
2012
The influence of the finite size of inpenetrable obstacles on the critical resolved shear stress
1977
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Microstructural evolution and strain hardening of Fe–24Mn and Fe–30Mn alloys during tensile deformation
2009
Recrystallization–precipitation interaction during austenite hot deformation of a Nb microalloyed steel
2011
Strengthening Mechanisms in γ′ Precipitating Alloys
1970
Design of a twinning-induced plasticity high entropy alloy
2015
Kinetics and Mechanisms of High‐Temperature Creep in Silicon Carbide: III, Sintered α‐Silicon Carbide
1988 StandoutNobel
Incorporation of deformation twinning in crystal plasticity models
1998
Using texture components in crystal plasticity finite element simulations
2003
Softening behavior by excessive twinning and adiabatic heating at high strain rate in a Fe–20Mn–0.6C TWIP steel
2015
Modeling the deformation textures and microstructural evolutions of a Fe–Mn–C TWIP steel during tensile and shear testing
2012
Bauschinger Effect and Back Stress in Gradient Cu-Ge Alloy
2017
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation
2009
Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6
2007
Non-local crystal plasticity model with intrinsic SSD and GND effects
2004
Making strong nanomaterials ductile with gradients
2014 StandoutScience
Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations
2005
The high-strain-rate response of alpha-titanium: experiments, deformation mechanisms and modeling
1998
Microstructure and tensile response of friction stir welded Al–Cu–Li (AA2198-T8) alloy
2019
Local strain hardening and nonuniformity of plastic deformation
1986
In-situ grain structure and texture evolution during friction stir welding of austenite stainless steel
2016
On the flow stress of [100]- and [111]-oriented Cu-Mn single crystals: A transmission electron microscopy study
1992
Room temperature tensile properties of Fe-19wt.%Cr alloys precipitation hardened by the intermetallic compound NiAl
1982
Statistische theorien der mischkristallhärtung
1972 Standout
Large strain work hardening and textures
1980
Evolution of intergranular stresses during in situ straining of IF steel with different grain sizes
2006
Influence of temperature and strain rate on slip and twinning behavior of zr
1995
Three-dimensional finite element simulation of a polycrystalline copper specimen
2007
Effect of Orientation and Purity on the Dynamic Recrystallization of Aluminum Single Crystals with Multi Glide Systems
1999
Texture evolution in equal-channel angular extrusion
2009
Advancing towards constitutive equations for the metal industry via the LEDS theory
2004
Constriction energy in the presence of a solute field
2000
A modified level set approach to 2D modeling of dynamic recrystallization
2013
Characterization of creep properties and creep textures in pure aluminum processed by equal-channel angular pressing
2008
Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles
2011
Grain boundary effects and void porosity evolution
2003
Motion of dislocations through a random array of weak obstacles
1975
Fretting modelling with a crystal plasticity model of Ti6Al4V
2006
Prediction of the mechanical behavior of nonlinear heterogeneous systems by multi-level finite element modeling
1998
A unified phenomenological description of work hardening and creep based on one-parameter models
1984
Texture variations in an aluminum friction stir weld
2007
Finite element modeling of crystal plasticity with grains shaped as truncated octahedrons
2006
Texture and Anisotropy
2002
Strength, strain-rate sensitivity and ductility of copper with nanoscale twins
2006
Alloy Design, Combinatorial Synthesis, and Microstructure–Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels
2014
Practical Aspects of Computational Chemistry
2009
Investigation of three-dimensional aspects of grain-scale plastic surface deformation of an aluminum oligocrystal
2008
Finite element modeling of lattice misorientations in aluminum polycrystals
2002
Texture development in near-α Ti friction stir welds
2010
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour
1997
Role of internal stresses in co-deformed two-phase materials
2006
Bauschinger effect in unpassivated freestanding nanoscale metal films
2008
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Effect of Process Parameters on a Metallurgical Route Providing Nano‐Structured Single Phase Steel with High Work‐Hardening
2011
Kinetics of f.c.c. deformation twinning and its relationship to stress-strain behaviour
1978
The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
2015
A re-evaluation of “The micromechanics of twinning in a TWIP steel”
2015
Modelling the behaviour of polycrystalline austenitic steel with twinning-induced plasticity effect
2007
Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy
2019
EXPONENTIAL MAP ALGORITHM FOR STRESS UPDATES IN ANISOTROPIC MULTIPLICATIVE ELASTOPLASTICITY FOR SINGLE CRYSTALS
1996
Prediction of steel flow stresses at high temperatures and strain rates
1991
Comparison of texture evolution in fcc metals predicted by various grain cluster homogenization schemes
2009
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Effects of grain interactions on deformation and local texture in polycrystals
1995
The effect of solute on discontinuous dynamic recrystallization
2012
New trends in creep microstructural models for pure metals
1987
A constitutive model for the tensile behaviour of TWIP steels: Composition and temperature dependencies
2015
Dislocation movement through random arrays of obstacles
1966 Standout
Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy
2011
Drawability assessment of BCC steel sheet by using elastic/crystalline viscoplastic finite element analyses
2001
Heterogeneous deformation in twinning-induced plasticity steel
2012
Dislocation structures and crystal orientations of copper single crystals deformed by equal-channel angular pressing
2005
Sintering dense nanocrystalline ceramics without final-stage grain growth
2000 StandoutNature
On the experimental characterization of crystal plasticity in polycrystals
2003
A study of the stress state associated with twin nucleation and propagation in anisotropic materials
1993
Twinning Models in Self-Consistent Texture Simulations of TWIP Steels
2008
Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models
2006
Effect of vanadium content on dynamic strain ageing in microalloyed medium carbon steel
2004
Plastic instabilities and uniaxial tensile ductilities
1980
Investigation of contribution of {123} slip planes to development of rolling textures in bee metals by use of Taylor models
1995
Microstructure and Mechanical Properties of Austenitic Stainless Steels after Dynamic and Post‐Dynamic Recrystallization Treatment
2018
Hardening evolution of AZ31B Mg sheet
2006 Standout
A theoretical examination of the plastic properties of bcc crystals deforming by 〈111〉 pencil glide
1971
The effect of twinning and slip on the bauschinger effect of hadfield steel single crystals
2001
On the nature of high internal stresses in ultrafine grained materials
1994
The strength of a precipitation hardened AlZnMg alloy
1978
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy
2006
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
2010 Standout
Finite element modelling of two phase Fe–Cu polycrystals
2004
On the consideration of interactions between dislocations and grain boundaries in crystal plasticity finite element modeling – Theory, experiments, and simulations
2006
Modelling and design of stress-induced martensite formation in metastable β
2013
A microtexture investigation of recrystallization during friction stir processing of as-cast NiAl bronze
2006
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Estimation of the critical resolved shear stress for dislocation glide through a random mixture of distinct obstacles
1975
Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel
2012
Microstructural size effects on mechanical properties of high purity nickel
2010
Texture development during the torsion testing of α-iron and two IF steels
1996
Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression
2004
Mesoscale simulation of deformed austenite decomposition into ferrite by coupling a cellular automaton method with a crystal plasticity finite element model
2004
A new mechanism of work hardening in the late stages of large strain plastic flow in F.C.C. and diamond cubic crystals
1993
Dynamic recrystallization under changing loading conditions
1987
Experimental investigation of plastic grain interaction
2002
Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing
2011
The influence of back pressure on ECAP processed AA 6016: Modeling and experiment
2007
Friction stir processing of squeeze cast A356 with surface compacted graphene nanoplatelets (GNPs) for the synthesis of metal matrix composites
2019
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Development of grain structure during friction stir welding
2004
Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation
2002
Review of experimental techniques for high rate deformation and shock studies
2004 Standout
Thermostatistical modelling of hot deformation in FCC metals
2013
Recrystallization kinetics within adiabatic shear bands
1997
Metal forming: Industrial, mechanical computational and microstructural
1993
The Ailao Shan/Red River metamorphic belt: Tertiary left-lateral shear between Indochina and South China
1990 StandoutNature
Overview no. 42 Texture development and strain hardening in rate dependent polycrystals
1985
On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction
2002
Viscoplasticity of heterogeneous metallic materials
2008
Modeling of continuous dynamic recrystallization in commercial-purity aluminum
2009
A time integration algorithm for elasto‐viscoplastic cubic crystals applied to modelling polycrystalline deformation
1992
Investigations of the formability of BCC steel sheets by using crystalline plasticity finite element analysis
2002
Material Flow during Friction Stir Welding of HSLA 65 Steel
2013
The type of dislocation interaction as the factor determining work hardening
1980
Dislocation density based modeling of work hardening in the context of integrative modeling of aluminum processing
2004
Elastic-plastic crystal mechanics for low symmetry crystals
1995
Crystal plasticity modeling of texture development and hardening in TWIP steels
2012
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
1993 Standout
Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn
2004
High angle boundaries formed by grain subdivision mechanisms
1997
Stress response and persistence characteristics of the ideal orientations of shear textures
1989
Deformation twinning in silver-and copper-alloy crystals
1974
Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60
2001
Analysis of Structural Factors That Control Necking during Tension of FCC Metals and Alloys
2005
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Hot deformation and dynamic recrystallization of Al-5Mg-0.8Mn alloy
1984
Modeling the strain hardening response of low SFE FCC alloys
1998
The physics of mechanical alloying: A first report
1990
Development of shear bands in f.c.c. single crystals
1985
The effect of particle size distributions on the CRSS of aged NiAl alloys
1976
Grain-size strengthening in terms of dislocation density measured by resistivity
1991
Steels for bearings
2011 Standout
Mechanical alloying and milling
2001 Standout
Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins
1997
Serrated flow kinetics in a Zr-based bulk metallic glass
2010
A Phenomenological Model of Twinning Kinetics
2016
Size effects in micromechanics of nanocrystals
1993
Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure
2011
Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra
1997
Shear localization and shear instability in materials in the ductile field
1980
Modeling the dynamic recrystallization under multi-stage hot deformation
2004
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Development of microstructure in FCC metals during cold work
1999
Continuous dynamic recrystallization during severe plastic deformation
2015
Microstructures and properties of copper processed by equal channel angular extrusion for 1–16 passes
2004
Dislocation substructures in mild steel deformed in simple shear
1989
A Monte Carlo study of influence of deformation temperature on dynamic recrystallization
1995
Quantitative prediction of textures in aluminium cold rolled to moderate strains
2002
Analysis of work hardening and recrystallization during the hot working of steel using a statistically based internal variable model
2003
Micromechanics of twinning in a TWIP steel
2015
Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations
1984 Standout
Mechanisms of slip mode modification in F.C.C. solid solutions
1990
Constitutive Modeling of the Tensile Behavior of Al-TWIP Steel
2011
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
2010
Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear
2002
Grain-size effect in viscoplastic polycrystals at moderate strains
2000
Development of dynamic recrystallization theory
2004
Hardening by ordered coherent precipitates related to the statistical theory
1971
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Precipitation and grain refinement in a 2195 Al friction stir weld
2006
Time-dependent deformation of metals
1985
Nonconvex energy minimization and dislocation structures in ductile single crystals
1999
Work hardening in heterogeneous alloys—a microstructural approach based on three internal state variables
2000
Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals
2011
On modelling the elasto-viscoplastic response of metals using polycrystal plasticity
1998
Analysis of Deformation Kinetics in Seven Body-Centered-Cubic Pure Metals Using a Two-Obstacle Model
2010
Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallization
2008
Stress-substructure relationships in cyclically and monotonically deformed wavy slip mode metals
1982
Multi-phase-field simulations for dynamic recrystallization
2009
Evaluation of the Role of Deformation Twinning in Work Hardening Behavior of Face-Centered-Cubic Polycrystals
2007
Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior
2013
On the relationship between work hardening and twinning rate in TWIP steels
2012
Effects of interactions among crystals on the inhomogeneous deformations of polycrystals
1996
Dynamic simulation of solution hardening
1978
Crystal plasticity simulation study on the influence of texture on earing in steel
2005
Dynamic response of a Pd40Ni40P20 bulk metallic glass in tension
2002
Saturation of Fragmentation During Severe Plastic Deformation
2010
A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size
2006
Friction stir welding and processing
2005 Standout
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials
2010
Precipitation hardening in metals
1999 Standout
Comparison of void strengthening in fcc and bcc metals: Large-scale atomic-level modelling
2005
Severe plastic deformation of metals by high-pressure tube twisting
2008
Modeling strain hardening and texture evolution in friction stir welding of stainless steel
2005
Yield surface simulation for partially recrystallized aluminum polycrystals on the basis of spatially discrete data
2000
Microstructure evolution during dynamic discontinuous recrystallization in particle-containing Cu
2014
Flow stress analysis of TWIP steel via the XRD measurement of dislocation density
2010
Reflections on the dependence of plastic anisotropy on texture
1998
Effect of Grain Size on Tensile Properties of TWIP Steel
2007
Behavior of Li Guest in KNb5O13 Host with One-Dimensional Tunnels and Multiple Interstitial Sites
2011 StandoutNobel
The theory of dislocation-based crystal plasticity
1999
Cold work hardening in stages IV and V of F.C.C. metals—II. Model fits and physical results
1993
Clarification of microstructure evolution of aluminum during friction stir welding using liquid CO2 rapid cooling
2017
The evolution of plastic resistance in large strain plastic flow of single phase subgrain forming metals
1984
Modelling of work hardening and stress saturation in FCC metals
1997
Evolution of dislocation structures and deformation behavior of iron at different temperatures: Part I. strain hardening curves and cellular structure
1992
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
2012
Simulation of rolling deformation texture of fcc metals with crystal plasticity finite element model
2006
Influence of in-grain mesh resolution on the prediction of deformation textures in fcc polycrystals by crystal plasticity FEM
2007
Micromechanics of pyramidal indentation in fcc metals: Single crystal plasticity finite element analysis
2008
Effect of stress reversals on the work hardening behaviour of polycrystalline copper
1986
A crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion
2005
Cold work hardening in stages IV and V of F.C.C. metals—I. Experiments and interpretation
1993
Effect of initial grain size on dynamic recrystallization of copper
1983
Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope
2009
The deformation behaviour of single crystals of the CuCrSiO2 system—I. Yield and pre-yield behaviour
1980
Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
2012
On the accuracy of the predictions of texture evolution by the finite element technique for fcc polycrystals
1998
Energy of slip transmission and nucleation at grain boundaries
2010
On deformation twinning in a 17.5% Mn–TWIP steel: A physically based phenomenological model
2010
Strengthening austenitic steels by using nanotwinned austenitic grains
2012
Twinning and strain-induced F.C.C. → H.C.P. transformation in the FeMnCrC system
1977
Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation
2001
Effect of coherency strain fields on the flow stress of a copper-3·12% cobalt alloy
1965
On the origin of deformation-induced rotation patterns below nanoindents
2007
Deformation texture prediction: from the Taylor model to the advanced Lamel model
2004
Microstructural and mechanical properties of a beta-type titanium alloy joint fabricated by friction stir welding
2017
An investigation of strengthening by spherical coherent G. P. Zones
1970
Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins
2005
Substructures in aluminium from dynamic and static recovery
1988
Dislocation clustering and long-range internal stresses in monotonically and cyclically deformed metal crystals
1988
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Pseudo-portevin-le châtelier effect in ordered alloys
1996
Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior
1998
An analysis of nonuniform and localized deformation in ductile single crystals
1982
Quantitative criterion for recrystallization nucleation in single-phase alloys: Prediction of critical strains and incubation times
2006
Hardness-based flow stress and fracture models for numerical simulation of hard machining AISI 52100 bearing steel
2004
A methodology for measuring and modeling crystallographic texture gradients in processed alloys
2001
Multi-phase-field Simulations of Dynamic Recrystallization during Transient Deformation
2011
Strengthening an austenitic Fe–Mn steel using nanotwinned austenitic grains
2012
Anisotropic plasticity and cavity growth during upset forging of Ti–6Al–4V
2005
Tuning Low Cycle Fatigue Properties of Cu-Be-Co-Ni Alloy by Precipitation Design
2018
A grain scale approach for modeling steady-state discontinuous dynamic recrystallization
2009
Heterogeneity of crystallographic texture in friction stir welds of aluminum
2001
Modeling the evolution of crystallographic dislocation density in crystal plasticity
2002
Textures in a superplastic Al-6Cu-0.3Zr alloy
1979
Modeling anisotropic strain hardening and deformation textures in low stacking fault energy fcc metals
2001
Theory of orientation gradients in plastically strained crystals
2002
Metastable Austenite in 17–4 Precipitation‐Hardening Stainless Steel Produced by Selective Laser Melting
2010
The mechanical properties of superplastic materials
1982
Three-dimensional deformation process simulation with explicit use of polycrystal plasticity models
1993
Anomalous age hardening effects in copper - titanium alloys strengthened by modulated structures
1980
Statistical theory of dislocation configurations in a random array of point obstacles
1977
The effect of interstitial carbon on the mechanical properties and dislocation substructure evolution in Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys
2016
On the equivalence of the relaxed Taylor theory and the Bishop-Hill theory for partially constrained plastic deformation of crystals
1982
A mean field model of dynamic and post-dynamic recrystallization predicting kinetics, grain size and flow stress
2015
Scale dependent crystal plasticity framework with dislocation density and grain boundary effects
2004
Comments on ‘a model of continuous dynamic recrystallization’ proposed for aluminum
2004
The statistical problem of hardening
1972
Mechanism of work hardening in Hadfield manganese steel
1981
Limiting configuration in dislocation glide through a random array of point obstacles
1975
Bauschinger effect in thin metal films
2005
Enhanced ductility of surface nano-crystallized materials by modulating grain size gradient
2012
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
A quantitative evaluation of the deformation texture predictions for aluminium alloys from crystal plasticity finite element method
2004
Finite element simulations of cold deformation at the mesoscale
1998
Some new aspects concerning particle hardening mechanisms in γ' precipitating Ni-base alloys—I. Theoretical concept
1982
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Orowan's explanation of the Bauschinger effect
1977
Integration algorithm for modeling the elasto-viscoplastic response of polycrystalline materials
1999
On the relationship between the twin internal structure and the work-hardening rate of TWIP steels
2010
Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel
1998
Microstructural and mechanical influences on dynamic strain aging phenomena
1994
A two-site mean field model of discontinuous dynamic recrystallization
2011
Microstructure evolution and mechanical properties of friction stir welded FeCrNiCoMn high-entropy alloy
2019
The mechanics of deformation–induced subgrain–dislocation structures in metallic crystals at large strains
2003
The onset of twinning in metals: a constitutive description
2001 Standout
Recrystallization and superplasticity at 300 °C in an aluminum-magnesium alloy
1991
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
2004 Standout
Material rate dependence and localized deformation in crystalline solids
1983
Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals
1983
Thermally activated dislocation glide through a random array of point obstacles: Computer simulation
1974
Microband formation in shock-loaded and quasi-statically deformed metals
1989
Microstructures and properties of high-entropy alloys
2013 Standout
Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography
2008
Hydrogen-induced strain localization and failure of austenitic stainless steels at high hydrogen concentrations
1991
Nonuniform deformations in polycrystals and aspects of the validity of the Taylor model
1989
Microstructural evolution and mechanical properties of Mg Zn Y Zr alloy during friction stir processing
2016
Nano-sized twins induce high rate sensitivity of flow stress in pure copper
2005
Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strains
2004
Twinning-induced plasticity (TWIP) steels
2017 Standout
Precipitation hardening
1985 Standout
Texture predictions using a polycrystal plasticity model incorporating neighbor interactions
1996
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Modeling of deformation behavior of copper under equal channel angular pressing
2003
Self-consistent polycrystal modelling of dynamic recrystallization during the shear deformation of a Ti IF steel
1999
Deformation texture transition in brass: critical role of micro-scale shear bands
2000
Computational description of nanocrystalline deformation based on crystal plasticity
2004
Dynamic recovery and strain hardening in the hot deformation of type 317 stainless steel
1986
Effects of interstitial content and grain size on the strength of titanium at low temperatures
1973
Selecting a set of discrete orientations for accurate texture reconstruction
2007
Computational modelling of single crystals
1993
A theoretical and experimental study of the plastic deformation of f.c.c. crystals in plane strain compression
1984
On the Zener drag
1985
Microstructures and hardness of ultrafine-grained Ni3Al
1993
Mechanical behavior of amorphous alloys
2007 Standout
Mechanism and kinetics of strain induced precipitation of Nb(C,N) in austenite
1992
Performance and Characterization of TWIP Steels for Automotive Applications
2013
Modelling of TWIP effect on work-hardening
2001
Strain hardening due to deformation twinning in α-titanium: Constitutive relations and crystal-plasticity modeling
2005
The brass-type texture and its deviation from the copper-type texture
2008
Temperature dependence of the flow stress of Fe–18Mn–0.6C–xAl twinning-induced plasticity steel
2013
N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform
2001
Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: F.E. model
2001
Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper
1994
Competing mechanisms and modeling of deformation in austenitic stainless steel single crystals with and without nitrogen
2001
Crystallographic texture approximation by quadratic programming
2006
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
2001
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress
1999 Standout
Tensile strength and ductility of indium
1988
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
2013
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery
2001
Dislocation boundaries and active slip systems
1995
Conversion of the hot torsion test results into flow curve with multiple regimes of hardening
2004
Investigating the limits of polycrystal plasticity modeling
2004
Influence of grain size and stacking-fault energy on deformation twinning in fcc metals
1999
Extreme structural inhomogeneities in high-pressure torsion samples along the axial direction
2011
Polycrystal plasticity modeling of intracrystalline boundary textures
1999
Latent hardening in copper and aluminium single crystals
1980
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
Grain interaction effects in polycrystalline Cu
2005
A constitutive model of the deformation behaviour of twinning induced plasticity (TWIP) steel at different temperatures
2014
Dislocation modelling of shear in f.c.c. crystals
1985
The effect of grain size on the high-strain, high-strain-rate behavior of copper
1995
A constitutive model for fcc single crystals based on dislocation densities and its application to uniaxial compression of aluminium single crystals
2004
Computational homogenization analysis in finite plasticity Simulation of texture development in polycrystalline materials
1999
Overview no. 76
1988 Standout
Effects of stored strain energy on restoration mechanisms and texture components in an aluminum–magnesium alloy prepared by friction stir processing
2015
Modeling microstructural effects on the evolution of cube texture during hot deformation of aluminum
2004
Impact of short-range ordering on yield strength of high manganese austenitic steels
2014
An integrated full-field model of concurrent plastic deformation and microstructure evolution: Application to 3D simulation of dynamic recrystallization in polycrystalline copper
2016
Hot working characteristics of steels in austenitic state
1995
Characterization and Modeling of Manganese Effect on Strength and Strain Hardening of Martensitic Carbon Steels
2013
Predicting the Hall–Petch effect in fcc metals using non-local crystal plasticity
2007
A texture component model for anisotropic polycrystal plasticity
2004
Demonstration of superconducting micromachined cavities
2015 StandoutNobel
Linking plastic deformation to recrystallization in metals using digital microstructures
2008
Current issues in recrystallization: a review
1997 Standout
Microstructural evolution and grain subdivision mechanisms during severe plastic deformation of aluminum particles by ball milling
2015
On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel
2013
Modeling the deformation behavior of Hadfield steel single and polycrystals due to twinning and slip
2000
Zur plastischen verformung des vielkristalls
1961 Standout
Interface controlled diffusional creep
1983
On the origin of dynamic strain aging in twinning-induced plasticity steels
2011
Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning
1978
Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling
2004
Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear
2005
Constitutive analysis in hot working
2002
Inelastic deformation of polycrystalline face centered cubic materials by slip and twinning
1998
Cyclic deformation behavior of Cu16at.%Al single crystals Part III: Friction stress and back stress behavior
1990
A model for the grain size dependent work hardening of copper
2006
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel
1989
Cold rolling textures in AZ31 wrought magnesium alloy
2004
Numerical simulations of necking during tensile deformation of aluminum single crystals
2008
A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization
1996
A flow stress for the deformation under varying condition—internal and state variable models
2013
Quantitative Prediction of Cold Rolling Textures in Low‐CarbonSteel by Means of the Lamel Model
1999
Texture development in friction stir welds
2011
Superplasticity in advanced materials
1993
Modelling oriented nucleation and selective growth during dynamic recrystallization
1992
Structural response of superaustenitic stainless steel to friction stir welding
2011
Additive manufacturing of metals
2016 Standout
Dynamic recrystallization and dynamic recovery in pure aluminum at 583K
1995
Simulation of rolling textures of b.c.c. metals considering grain interactions and crystallographic slip on {110}, {112} and {123} planes
1995
Strength of γ′ hardened nickel-base alloy
1978
Effects of grain interaction on deformation in polycrystals
1998
Work hardening in rolled nanolayered metallic composites
2004
Works of U.F. Kocks being referenced
KINEMATICS OF PLASTICITY RELATED TO THE STATE AND EVOLUTION OF THE MATERIAL MICROSTRUCTURE
1994
Thermal recovery processes in deformed aluminum
1979
Realistic constitutive relations for metal plasticity
2001
Latent hardening in aluminum
1966
On the formation of high angle grain boundaries during the deformation of aluminum single crystals
1982
The yield surface of h.c.p. crystals
1985
Polarity of work-hardening
1964
The effect of dislocation self-interaction on the orowan stress
1973
A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking
1995
Development of localized orientation gradients in fcc polycrystals
1996
On the origin of shear bands in textured polycrystals
1984
A comparison of different texture analysis techniques
1996
Transition to drag-controlled deformation in copper at high strain rates
1984
Simulations of texture development in calcite: Comparison of polycrystal plasticity theories
1991
Operational texture analysis
1991
Theory of torsion texture development
1984
Length changes and stress effects during recovery of deformed aluminum
1982
STATISTICAL TREATMENT OF PENETRABLE OBSTACLES
1967
A statistical theory of flow stress and work-hardening
1966
The strain dependence of static and dynamic strain-aging
1982
Elastic interactions between dislocations in a finite body
1969
The representation of orientation distributions
1987
An application of multisurface plasticity theory: yield surfaces of textured materials
1996
Comments on “Yield strength of metals as a function of grain size”
1959
Recovery in deformed copper and nickel single crystals
1983
Forward and reverse rearrangements of dislocations in tangled walls
1986
Large strain deformation of a copper—tungsten composite system. I. Strain distributions
1994
Accurate Representations of Geneil Textures by a Set of WetghtedGrains
1991
The relation between polycrystal deformation and single-crystal deformation
1970
On modeling anisotropy in deformation processes involving textured polycrystals with distorted grain shape
1990
On the origin of cell walls and of lattice misorientations during deformation
1980
Kinetics of flow and strain-hardening
1981 Standout
Deformation modes in γ-TiAl as derived from the single crystal yield surface
1996
Single‐crystal yield surface for trigonal lattices: Application to texture transitions in calcite polycrystals
1987
Dislocation kinetics at high strain rates
1987
Large strain deformation of a copper—tungsten composite system. II. Applications
1994
Application of polycrystal plasticity to sheet forming
1994
Viscoplastic modeling of texture development in quartzite
1989
On the strain-rate dependence of dynamic recrystallization in copper polycrystals
1992
New observations on the mechanisms of dynamic strain aging and of jerky flow
1979
A Review of the Stages of Work Hardening
1993
Effect of rate sensitivity on slip system activity and lattice rotation
1988
Taylor factors in materials with many deformation modes
1996
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Deformation behavior of 4;Mo alloys
1985
Polyslip in single crystals
1960
Slip geometry in partially constrained deformation
1982
Laws for Work-Hardening and Low-Temperature Creep
1976 Standout
Torsion testing for general constitutive relations: Gilles Canova's Master's Thesis
1999
Strain aging and strain hardening in NiC alloys
1985
On a possible relation between work hardening and fatigue failure
1967
A “universal” temperature scale for plastic flow
1986
The development of strain-rate gradients
1979
The relation between macroscopic and microscopic strain hardening in F.C.C. polycrystals
1984
On the temperature and stress dependence of the dislocation velocity stress exponent
1970
A model for texture development dominated by deformation twinning: Application to zirconium alloys
1991
A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable
1988
Mechanisms and models for large-strain heterogeneous plasticity
1994
Kinetics of solution hardening
1985
Dynamic recrystallization and dynamic recovery in <111> single crystals of nickel and copper
1983
Polyslip in polycrystals
1958
On the two distinct effects of thermal activation on plasticity: Application to nickel
1992