Citation Impact
Citing Papers
Precipitation and Hardening in Magnesium Alloys
2012 Standout
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Creep and Corrosion Properties of the Extruded Magnesium Alloy Containing Rare Earth
2007
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Correlating on-line monitoring parameters, pH, DO and ORP with nutrient removal in an intermittent cyclic process bioreactor system
2008
Laser material processing
2011 Standout
Microstructural evolution during the α2→α2+O transformation in Ti–Al–Nb alloys: phase-field simulation and experimental validation
2000
Block Copolymer-Templated Nanocomposite Electrodes for Rechargeable Lithium Batteries
2002
Recent advances in the development of aerospace materials
2018
Metastable Alumina Polymorphs: Crystal Structures and Transition Sequences
1998 Standout
Machining induced surface integrity in titanium and nickel alloys: A review
2010 Standout
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
A combined neural network and mechanistic approach for the prediction of corrosion rate and yield strength of magnesium-rare earth alloys
2010
Laser bending of a Ti3Al-based intermetallic alloy
2001
Processing, Structure, Texture and Microtexture in Titanium Alloys
2012
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Phase-Field Models for Microstructure Evolution
2002 Standout
Microstructure evolution and its effect on tensile and fracture behaviour of Ti-AI-Nb α<SUB>2</SUB> intermetallics
1993
Virus-Enabled Synthesis and Assembly of Nanowires for Lithium Ion Battery Electrodes
2006 StandoutScience
Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
2016
Review of recent studies in magnesium matrix composites
2004
Mechanical alloying and milling
2001 Standout
The inhibition of the Anammox process: A review
2012 Standout
Biodegradable metals
2014 Standout
Perspectives on Titanium Science and Technology
2013 Standout
The high-quality precision casting of titanium alloys
1998
The microstructure, tensile properties, and creep behavior of as-cast Mg–(1–10)%Sn alloys
2006
On the corrosion of binary magnesium-rare earth alloys
2008
Substructure in titanium alloy martensite
1998
Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study
2014 Standout
Improvement of Creep Strength of Mg-Al-Ca Thixomolded Alloy by Second Phases on Grain Boundaries and within Grains
2006
The formation of ordered ω-related phases in alloys of composition Ti4Al3Nb
1990
Magnesium and its alloys applications in automotive industry
2007 Standout
An overview of monolithic titanium aluminides based on Ti3Al and TiAl
2001
Metallic implant biomaterials
2014 Standout
Solidification paths and eutectic intermetallic phases in Mg–Al–Ca ternary alloys
2005
Structure and transition of eutectic (Mg,Al)Ca Laves phase in a die-cast Mg?Al?Ca base alloy
2004
Titanium Alloys for Aerospace Applications
2003 Standout
Microstructure and yield strength of UDIMET 720LI alloyed with Co-16.9 Wt Pct Ti
2005
Cobalt-Base High-Temperature Alloys
2006 StandoutScience
Electrochemical behaviour and corrosion of Mg–Y alloys
2011
Synthesis of B2 phase in TiAlNb alloys by mechanical alloying
1991
Microstructures and mechanical properties of Ti–24Al–17Nb (at.%) laser beam welding joints
2002
Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
2015
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Phase transformations in the (Ti, Al)3 Nb section of the TiAlNb system—I. Microstructural predictions based on a subgroup relation between phases
1994
Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride
2000 StandoutNature
Works of T.K. Nandy being referenced
Intermittent cyclic process for enhanced biological nutrient removal treating combined chemical laboratory wastewater
2006
Effect of Aged Microstructure on the Strength and Work Hardening Behavior of Ti-15V-3Cr-3Sn-3Al Alloy
2015
Tensile and fracture toughness of high strength β Titanium alloy, Ti–10V–2Fe–3Al, as a function of rolling and solution treatment temperatures
2012
Effect of Minor Additions of Boron on Microstructure and Mechanical Properties of As-Cast Near α Titanium Alloy
2010
Volume size factor and lattice parameter in cubic intermetallics with the B2 structure
1998
Microstructural stability and creep of rare-earth containing magnesium alloys
2003
Structure, tensile deformation, and fracture of a Ti3Al-Nb alloy
1990
Microstructural characterization of a die-cast magnesium-rare earth alloy
2001
Deformation structure in a Ti-24Al-11Nb alloy
1990
Crystallographic orientation relationships of boride and carbide particles with α and β phases in a β-Ti alloy
2014
The threshold stress for creep controlled by dislocation-particle interaction
1994
On the evaluation of stability of rare earth oxides as face coats for investment casting of titanium
1990
Solidification of high-refractory ruthenium-containing superalloys
2002
Site occupation in the ordered beta phase of ternary TiAlz.sbnd;Nb alloys
1987
Effect of silicon on the elevated temperature properties of a Ti3Al base alloy
1995
Transformations in a Ti-24Al- 15Nb alloy: Part II. a composition invariant βo → O transformation
1992
Transformations in a Ti-24AI-15Nb alloy: Part I. Phase equilibria and microstructure
1992