Citation Impact
Citing Papers
Thermal conductivity of gypsum containig phase change material (PCM) for builiding applications
2011
Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation
2007
Economic impact of integrating PCM as passive system in buildings using Fanger comfort model
2015
Climate adaptive building shells: State-of-the-art and future challenges
2013 Standout
Phase change materials and thermal energy storage for buildings
2015 Standout
Morphological characterization and applications of phase change materials in thermal energy storage: A review
2017
Advanced Materials for Energy Storage
2010 Standout
Thermoresponsive Polymer Induced Sweating Surfaces as an Efficient Way to Passively Cool Buildings
2012
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
2019 Standout
Energy saving latent heat storage and environmental friendly humidity-controlled materials for indoor climate
2012
A new design of metal-sheet cool roof using PCM
2012
Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content
2010
Research progress on CNTs/CNFs-modified cement-based composites – A review
2019 Standout
Emerging Engineered Wood for Building Applications
2022 Standout
Materials used as PCM in thermal energy storage in buildings: A review
2011 Standout
Enhance the Thermal Storage of Cement-Based Composites With Phase Change Materials and Carbon Nanotubes
2013
Phase change materials integrated in building walls: A state of the art review
2014 Standout
Passive thermal control in residential buildings using phase change materials
2015
Phase change materials for smart textiles – An overview
2007 Standout
Phase change materials and energy efficiency of buildings: A review of knowledge
2019 Standout
Clear Wood toward High-Performance Building Materials
2019 Standout
Tests of prototype PCM ‘sails’ for office cooling
2010
Capric–myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage
2008
Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook
2006 Standout
Experimental investigation of PCM cold storage
2008
Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review
2013 Standout
Use of microencapsulated PCM in concrete walls for energy savings
2006
Overview of thermal energy storage (TES) potential energy savings and climate change mitigation in Spain and Europe
2011
Applications of Phase Change Material in highly energy-efficient houses
2012
Energy storage technologies and real life applications – A state of the art review
2016 Standout
A comparative study of the CFD modeling of a ventilated active façade including phase change materials
2014
The manufacture of microencapsulated phase change materials suitable for the design of thermally enhanced fabrics
2006
Carbon nanotubes (CNTs) in ultra-high performance concrete (UHPC): Dispersion, mechanical properties, and electromagnetic interference (EMI) shielding effectiveness (SE)
2020 Standout
The application of a validated numerical model to predict the energy conservation potential of using phase change materials in the fabric of a building
2006
A review on the development of cool pavements to mitigate urban heat island effect
2015
On the importance of the location of PCMs in building walls for enhanced thermal performance
2013
Energy flexibility of residential buildings using short term heat storage in the thermal mass
2016 Standout
A review on effect of phase change material encapsulation on the thermal performance of a system
2012
Reducing heat loss through the building envelope by using polyurethane foams containing thermoregulating microcapsules
2016
Performance of a hybrid heating system with thermal storage using shape-stabilized phase-change material plates
2007
Phase change materials and products for building applications: A state-of-the-art review and future research opportunities
2015
Cool colored coating and phase change materials as complementary cooling strategies for building cooling load reduction in tropics
2016
Micro-encapsulated paraffin in phase-change slurries
2005
Cooling the cities – A review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments
2012 Standout
Critical review of latent heat storage systems for free cooling in buildings
2017
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
2009 Standout
Thermal energy storage properties and thermal reliability of some fatty acid esters/building material composites as novel form-stable PCMs
2012
Novel concept of composite phase change material wall system for year-round thermal energy savings
2010
Phase change materials and carbon nanostructures for thermal energy storage: A literature review
2017
A review of power battery thermal energy management
2011 Standout
Micro/nanoencapsulated n-nonadecane with poly(methyl methacrylate) shell for thermal energy storage
2014
Performance characterization of a PCM storage tank
2014
Peak load shifting control using different cold thermal energy storage facilities in commercial buildings: A review
2013
Thermal analysis of a direct-gain room with shape-stabilized PCM plates
2007
Rigid polyurethane foams incorporated with phase change materials: A state-of-the-art review and future research pathways
2014
Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: Preparation and thermal properties
2010
Advanced energy storage materials for building applications and their thermal performance characterization: A review
2016
Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage
2011
Review on thermal energy storage with phase change materials (PCMs) in building applications
2011 Standout
Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage
2018 Standout
Phase change materials for thermal energy storage
2014 Standout
Integrating phase change materials in construction materials: Critical review
2019
Micro/nano encapsulation of some paraffin eutectic mixtures with poly(methyl methacrylate) shell: Preparation, characterization and latent heat thermal energy storage properties
2014
Direct contact PCM–water cold storage
2010
Life Cycle Assessment of the inclusion of phase change materials (PCM) in experimental buildings
2010
Incorporation of phase change materials in cementitious systems via fine lightweight aggregate
2012
Phase change materials for photovoltaic thermal management
2015
Review on using microencapsulated phase change materials (PCM) in building applications
2015
A review of the current work potential of a trombe wall
2020 Standout
Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020
2013 Standout
Modelling for performance prediction of highly insulated buildings with different types of thermal mass
2017
Energy performance of building envelopes integrated with phase change materials for cooling load reduction in tropical Singapore
2015
An overview of thermal energy storage systems
2017 Standout
A new experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM
2013
Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storage
2014
Effect of temperature on mortars with incorporation of phase change materials
2015
Preparation of PNHMPA/PEG interpenetrating polymer networks gel and its application for phase change fibers
2012
Thermal energy storage materials and systems for solar energy applications
2016 Standout
High-temperature phase change materials for thermal energy storage
2009 Standout
State of the art of thermal storage for demand-side management
2012
Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage
2011
Assessment of T-History Method Variants to Obtain Enthalpy–Temperature Curves for Phase Change Materials With Significant Subcooling
2015
A review on phase change materials integrated in building walls
2010
Crystal structures and thermochemistry on phase change materials (n-CnH2n+1NH3)2CuCl4(s) (n=14 and 15)
2011
Capric acid and stearic acid mixture impregnated with gypsum wallboard for low-temperature latent heat thermal energy storage
2007
Passive building energy savings: A review of building envelope components
2011 Standout
Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review
2015
Experimental investigation of latent heat thermal energy storage using PCMs with different melting temperatures for building retrofit
2019
Insulation materials for the building sector: A review and comparative analysis
2016 Standout
Experimental study of the influence of thermal mass on thermal comfort and cooling energy demand in residential buildings
2020 Standout
A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings
2012
Numerical Investigation of Indoor Air Temperature with the Application of PCM Gypsum Board as Ceiling Panels in Buildings
2011
Thermal performance and cost analysis of mortars made with PCM and different binders
2016
Review on building energy performance improvement using phase change materials
2017 Standout
Development of phase change materials based microencapsulated technology for buildings: A review
2010
Thermal energy storage for low and medium temperature applications using phase change materials – A review
2016 Standout
Characterization of thermal performance of a solid–solid phase change material, di-n-hexylammonium bromide, for potential integration in building materials
2012
Review on thermal energy storage with phase change materials and applications
2008 Standout
Developments in organic solid–liquid phase change materials and their applications in thermal energy storage
2015
Phase Change Materials (PCM) microcapsules with different shell compositions: Preparation, characterization and thermal stability
2010
A review on long-term sorption solar energy storage
2009 Standout
Heat transfer study of submicro-encapsulated PCM plate for food packaging application
2014
Synthesis and properties of paraffin capsules as phase change materials
2008
A review of solar collectors and thermal energy storage in solar thermal applications
2012 Standout
Mortars based in different binders with incorporation of phase-change materials: Physical and mechanical properties
2015
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
2010 Standout
Influence of the Type of Phase Change Materials Microcapsules on the Properties of Lime‐G ypsum Thermal Mortars
2013
Experimental study of using PCM in brick constructive solutions for passive cooling
2009
Temperature reduction due to the application of phase change materials
2007
Thermal characterization of gypsum boards with PCM included: Thermal energy storage in buildings through latent heat
2012
Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material
2012
Preparation, characterization, and thermal properties of the microencapsulation of a hydrated salt as phase change energy storage materials
2013
Review on battery thermal management system for electric vehicles
2018 Standout
Radiant floors integrated with PCM for indoor temperature control
2011
A review on current status and challenges of inorganic phase change materials for thermal energy storage systems
2016
Novel heating and cooling concept employing rainwater cisterns and thermo-active building systems for a residential building
2009
Verification and validation of EnergyPlus phase change material model for opaque wall assemblies
2012
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
Thermal energy storage technologies and systems for concentrating solar power plants
2013 Standout
Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency
2013 Standout
Dynamic characteristics and energy performance of buildings using phase change materials: A review
2009
Modeling phase change materials embedded in building enclosure: A review
2013
Simulation of a ventilated cavity to enhance the effectiveness of PCM wallboards for summer thermal comfort in buildings
2013
Improvement of the thermal behaviour of gypsum blocks by the incorporation of microcapsules containing PCMS obtained by suspension polymerization with an optimal core/coating mass ratio
2010
An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating
2007
Performance enhancement in latent heat thermal storage system: A review
2009
An approach to the simulation of PCMs in building applications using TRNSYS
2004
Analytical optimization of interior PCM for energy storage in a lightweight passive solar room
2009
Experimental investigation of thermal characteristics of a mortar with or without a micro-encapsulated phase change material
2014
Preliminary Study of Passive Cooling Strategy Using a Combination of PCM and Copper Foam to Increase Thermal Heat Storage in Building Facade
2010
Review of thermal energy storage technologies based on PCM application in buildings
2013
Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls
2012
Thermal insulation capability of PEG-containing polyurethane foams
2008
Encapsulation of phase change materials by complex coacervation to improve thermal performances of woven fabrics
2007
Recent developments in phase change materials for energy storage applications: A review
2018 Standout
Review of energy system flexibility measures to enable high levels of variable renewable electricity
2015 Standout
Overview of current development in electrical energy storage technologies and the application potential in power system operation
2014 Standout
Experimental assessment of a phase change material for wall building use
2009
Review on phase change materials (PCMs) for cold thermal energy storage applications
2012 Standout
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
2016 Standout
Life cycle assessment of building materials: Comparative analysis of energy and environmental impacts and evaluation of the eco-efficiency improvement potential
2010 Standout
Works of Thomas Haussmann being referenced
Unconventional experimental technologies available for phase change materials (PCM) characterization. Part 1. Thermophysical properties
2014
Intercomparative tests on phase change materials characterisation with differential scanning calorimeter
2012
Micro-encapsulated phase-change materials integrated into construction materials
2005