Citation Impact
Citing Papers
Additive manufacturing of ceramics: A review
2014
Additive Manufacture of Ceramics Components by Inkjet Printing
2015
Customized Smartness: A Survey on Links between Additive Manufacturing and Sensor Integration
2016
“Chimie douce”: A land of opportunities for the designed construction of functional inorganic and hybrid organic-inorganic nanomaterials
2009
Additive manufacturing: technology, applications and research needs
2013 Standout
Slurry-based selective laser sintering of polymer-coated ceramic powders to fabricate high strength alumina parts
2011
Evolved gas analysis with skimmer interface and ion attachment mass spectrometry for burnout monitoring of organic additives in ceramic processing
2006
Ionic transport in hybrid lead iodide perovskite solar cells
2015 Standout
Thin films of hard cubic Zr3N4 stabilized by stress
2005
3D modeling, custom implants and its future perspectives in craniofacial surgery
2014
Layered nanocomposites inspired by the structure and mechanical properties of nacre
2011
Manganese oxide-based materials as electrochemical supercapacitor electrodes
2010 Standout
A review of electrode materials for electrochemical supercapacitors
2011 Standout
3D-printing techniques in a medical setting: a systematic literature review
2016 Standout
Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing
2017
Reduction of the bulk modulus at high pressure in CrN
2009 StandoutNobel
Graphene-based composite materials
2006 StandoutNature
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
The properties and applications of nanodiamonds
2011 Standout
Additive manufacturing of biomaterials
2017
Metal–air batteries: from oxygen reduction electrochemistry to cathode catalysts
2012 Standout
Oxide-ion and proton conducting electrolyte materials for clean energy applications: structural and mechanistic features
2010
Materials for electrochemical capacitors
2008 Standout
A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
2015
Dynamics of solutes with hydrodynamic interactions: Comparison between Brownian dynamics and stochastic rotation dynamics simulations
2013
Kinetically driven ordered phase formation in binary colloidal crystals
2013
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering
2011
Bioinspired structural materials
2014 Standout
Heterogeneity of functional groups in a metal–organic framework displays magic number ratios
2015 StandoutNobel
Ink Jet Printing of Microdot Arrays of Mesostructured Silica
2006
Stereolithography of SiOC Ceramic Microcomponents
2015
Electrophoretic deposition and its use to synthesize ZrO2/Al2O3 micro-laminate ceramic/ceramic composites
1993
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
2010 Standout
Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review
2011
Mechanical characterisation of miniaturised direct inkjet printed 3Y-TZP specimens for microelectronic applications
2010
A review on 3D micro-additive manufacturing technologies
2012 Standout
Computer Simulation of Liquids
2017 Standout
Progress in Additive Manufacturing and Rapid Prototyping
1998
Recent advances in 3D printing of porous ceramics: A review
2017
Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices
2018
Review of hydrogen production using chemical-looping technology
2017 Standout
Optimal Process Parameters for 3D Printing of Porcelain Structures
2016
Two-photon direct laser writing of ultracompact multi-lens objectives
2016 Standout
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
2017
Processing techniques for functionally graded materials
2003 Standout
SiC/TiC laminated structure shaped by electrophoretic deposition
2004
Issues and opportunities facing aqueous zinc-ion batteries
2019 Standout
Fabrication and Measurement of Micro Three‐Dimensional Photonic Crystals of SiO 2 Ceramic for Terahertz Wave Applications
2007
Materials development for intermediate-temperature solid oxide electrochemical devices
2012
Depth and width of cured lines in photopolymerizable ceramic suspensions
2013
Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method
2017
Formulation of an Aqueous Titania Suspension and its Patterning with Ink‐Jet Printing Technology
2011
3D Printing of Polymer Nanocomposites via Stereolithography
2017
Additive manufacturing of complex-shaped graded TiC/steel composites
2017
Dispersant Adsorption and Viscoelasticity of Alumina Suspensions Measured by Quartz Crystal Microbalance with Dissipation Monitoring and in Situ Dynamic Rheology
2008
Position preference and diffusion path of an oxygen ion in apatite-type lanthanum silicate La9.33Si6O26: a density functional study
2011
Fabrication of polymer derived ceramic parts by selective laser curing
2004
3D printing of piezoelectric element for energy focusing and ultrasonic sensing
2016
Direct Ink Writing of 3D Functional Materials
2006 Standout
Non-destructive quality control methods in additive manufacturing: a survey
2020
Hierarchically porous materials: synthesis strategies and structure design
2016 Standout
Inkjet Printing of Polymers: State of the Art and Future Developments
2004 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass
2014
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
2016
Optimization of spray dried attrition-resistant iron based oxygen carriers for chemical looping reforming
2016
Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review
2013 Standout
Evaluation of apatite silicates as solid oxide fuel cell electrolytes
2009
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
2008
Electromagnetic interference shielding mechanisms of CNT/polymer composites
2009 Standout
Highly loaded UV curable nanosilica dispersions for rapid prototyping applications
2009
Aqueous electrophoretic deposition of AL2O3/ZrO2 layered ceramics
1998
Characterization of ceramic components fabricated using binder jetting additive manufacturing technology
2016
Electrical applications of carbon materials
2004 Standout
Structural investigation of the oxide-ion electrolyte with SrMO3(M = Si/Ge) structure
2014 StandoutNobel
Solution-based aerosol deposition process for synthesis of multilayer structures
2011
Sr3−3xNa3xSi3O9−1.5x (x = 0.45) as a superior solid oxide-ion electrolyte for intermediate temperature-solid oxide fuel cells
2014 StandoutNobel
Control of the viscous behavior of highly concentrated mullite suspensions for robocasting
2003
Inkjet-Printing-Engineered Functional Microdot Arrays Made of Mesoporous Hybrid Organosilicas
2010
Dispersion of hematite suspensions with sodium polymethacrylate dispersants in alkaline medium
2006
Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography – Optimization of the drying and debinding processes
2016
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Fabrication of Functionally Graded Materials Via Inkjet Color Printing
2006
Aggregation Effects on the Compressive Flow Properties and Drying Behavior of Colloidal Silica Suspensions
1999
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
A critical review of the use of 3-D printing in the construction industry
2016
Fabrication of lanthanum strontium cobalt ferrite (LSCF) cathodes for high performance solid oxide fuel cells using a low price commercial inkjet printer
2015
Effects of layer thickness and binder saturation level parameters on 3D printing process
2010
Formulation and Multilayer Jet Printing of Ceramic Inks
1999
Functionally graded ceramic/ceramic and metal/ceramic composites by electrophoretic deposition
1997
Graphene/Polymer Nanocomposites
2010 Standout
SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems
2017
Materials for additive manufacturing
2017
Colloidal Processing of Ceramics
2000 Standout
Photopolymerization of powder suspensions for shaping ceramics
2010
Fabrication and Properties of Tape‐Cast Laminated and Functionally Gradient Alumina–Titanium Carbide Materials
2000
Development and characterizations of novel aqueous-based LSCF suspensions for inkjet printing
2018
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
2016 Standout
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
2013
Inkjet printing of ceramic colloidal suspensions: Filament growth and breakup
2016
Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
2012
Review on supercapacitors: Technologies and materials
2016 Standout
Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs
2010
Rationally Designing High-Performance Bulk Thermoelectric Materials
2016 Standout
Recent advances in high temperature electrolysis using solid oxide fuel cells: A review
2012 Standout
Process parameters analysis of direct laser sintering and post treatment of porcelain components using Taguchi's method
2009
Inkjet printing ceramics: From drops to solid
2011
Fabrication of fine-grained alumina ceramics by a novel process integrating stereolithography and liquid precursor infiltration processing
2016
Continuous liquid interface production of 3D objects
2015 StandoutScience
Curing characteristics of ceramic stereolithography for an aqueous-based silica suspension
2009
Preparation of Ceramic Inks for Solid Freeforming Using a Continuous Jet Printer
1999
Infiltration studies of additive manufacture of WC with Co using binder jetting and pressureless melt method
2019
Control of Composition and Structure in Laminated Silicon Nitride/Boron Nitride Composites
2002
Sr1−xKxSi1−yGeyO3−0.5x: a new family of superior oxide-ion conductors
2012 StandoutNobel
Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography
2017
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
2015
Surface Characterization of NH4PAA-Stabilized Zirconia Suspensions
1999
Cathodic electrodeposition of MnOx films for electrochemical supercapacitors
2005
Aggregation and Deposition of Engineered Nanomaterials in Aquatic Environments: Role of Physicochemical Interactions
2010 Standout
3D printing of ceramics: A review
2018 Standout
Thermoelectric Solid-Oxide Fuel Cells with Extra Power Conversion from Waste Heat
2012 StandoutNobel
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Ultralight, ultrastiff mechanical metamaterials
2014 StandoutScience
Light curing strategies for lithography-based additive manufacturing of customized ceramics
2014
Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography
2010
Additive Manufacturing of Dense Alumina Ceramics
2014
Direct solar vapor generation with micro‐3D printed hydrogel device
2021
A review on fundamentals and applications of electrophoretic deposition (EPD)
2006 Standout
The effect of polyethyleneimine as an electrolyte additive on zinc electrodeposition mechanism in aqueous zinc-ion batteries
2017
Fabrication of anode supported SOFC using plasma-sprayed films of the apatite-type lanthanum silicate as an electrolyte
2010
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
New Chemical Systems for Solid Oxide Fuel Cells
2009
Direct fabrication of an integral ceramic mould by stereolithography
2009
Application of dispenser printing for the preparation of a SOFC cathode with controlled microstructure
2012
Synthetic nacre by predesigned matrix-directed mineralization
2016 StandoutScience
Additive Manufacturing of Ceramic‐Based Materials
2014
Photothermal Nanomaterials: A Powerful Light-to-Heat Converter
2023 Standout
Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer
2016
Process parameters appraisal of fabricating ceramic parts based on stereolithography using the Taguchi method
2012
Parametric analysis to quantify process input influence on the printed densities of binder jetted alumina ceramics
2019
Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloy
2010
Monoclinic Sr1–xNaxSiO3–0.5x: New Superior Oxide Ion Electrolytes
2013 StandoutNobel
Three‐Dimensional Stereolithography of Alumina Photonic Crystals for Terahertz Wave Localization
2014
Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures
2012
Works of Thierry Chartier being referenced
Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography
2011
A new custom made bioceramic implant for the repair of large and complex craniofacial bone defects
2012
Binder burnout and evolution of the mechanical strength of dry-pressed ceramics containing poly(vinyl alcohol)
2001
Influence of the temperature on the stability of aqueous alumina suspensions
1999
Stereolithography for the fabrication of ceramic three‐ dimensional parts
1998
Influence of irradiation parameters on the polymerization of ceramic reactive suspensions for stereolithography
2017
Elaboration, by tape casting, and thermal characterization of a solid oxide fuel half-cell for low temperature applications
2009
Laminar ceramic composites
1995
3D fine scale PZT skeletons of 1-3 ceramic polymer composites formed by ink-jet prototyping process
2005
Tape-cast alumina-zirconia laminates: Processing and mechanical properties
1997
Tracer diffusion in colloidal suspensions under dilute and crowded conditions with hydrodynamic interactions
2012
Effect of copolymer dispersant structure on the properties of alumina suspensions
2003
Ink-jet printing of ceramic micro-pillar arrays
2008
Degradation of dispersant during milling
1996
Evaluation of the La0.75Sr0.25Mn0.8Co0.2O3−δ system as cathode material for ITSOFCs with La9Sr1Si6O26.5 apatite as electrolyte
2009
Tape casting using UV curable binders
1997
MoSi2/Al2O3 FGM: elaboration by tape casting and SHS
2001
3D fine scale ceramic components formed by ink-jet prototyping process
2005
Silicon carbide heating elements
1998
Sintering kinetics and oxide ion conduction in Sr-doped apatite-type lanthanum silicates, La9Sr1Si6O26.5
2009
Tape Casting of Al 2 O 3 /ZrO 2 Laminated Composites
1986
Optical characterization of stereolithography alumina suspensions using the Kubelka–Munk model
2009
Stereolithography process: Influence of the rheology of silica suspensions and of the medium on polymerization kinetics – Cured depth and width
2012
Influence of organic components on properties of tape-cast aluminum nitride substrates
1990
Ceramic suspensions suitable for stereolithography
1998
3D Piezoelectric Structures Made by Ink-Jet Printing
2002
Dispersion of Al2O3 suspension with acrylic copolymers bearing carboxylic groups
2002
Study of cracking and microstructural evolution during drying of tape-cast aluminium nitride sheets
1991
Tape Casting and Properties of Mullite and Zirconia–Mullite Ceramics
1991
Oxygen permeation, thermal and chemical expansion of (La, Sr)(Fe, Ga)O3−δ perovskite membranes
2008
Stereolithography of structural complex ceramic parts
2002
Stereolithography for Manufacturing Ceramic Parts
2000
Binder Distribution in Spray-Dried Alumina Agglomerates
1998
Cast iron substrates reclamation by tape casting of NiCu treated by plasma transferred arc: optimization of the tape and its plasma treatment
2001
Preparation of LaMnO3 perovskite thin films by suspension plasma spraying for SOFC cathodes
2005
Processing of aqueous α-Al2O3, α-SiO2 and α-SiC suspensions with polyelectrolytes
1997
Ultrasonic Dispersion of Ceramic Powders
1990