Citation Impact
Citing Papers
Cement Manufacture and the Environment Part II: Environmental Challenges and Opportunities
2003
Extraction Methods of Citrus Peel Phenolic Compounds
2014
An Assessment of Carbon Pools, Storage, and Wood Products Market Substitution Using Life-Cycle Analysis Results
2005
Pharmaceutical Particle Engineering via Spray Drying
2007 Standout
SCHEMA Recombination of a Fungal Cellulase Uncovers a Single Mutation That Contributes Markedly to Stability
2009 StandoutNobel
Potential and utilization of thermophiles and thermostable enzymes in biorefining
2007
Microencapsulation of avocado oil by spray drying using whey protein and maltodextrin
2008 Standout
Bioconversion of lignocellulosic biomass: biochemical and molecular perspectives
2008
Spray-drying of proteins: effects of sorbitol and trehalose on aggregation and FT-IR amide I spectrum of an immunoglobulin G
2004
Bioactives from fruit processing wastes: Green approaches to valuable chemicals
2016 Standout
Rapid removal of organic micropollutants from water by a porous β-cyclodextrin polymer
2015 StandoutNature
Application of magnetic chitosan composites for the removal of toxic metal and dyes from aqueous solutions
2013
Study of the adsorption of Cr(VI) by tannic acid immobilised powdered activated carbon from micro-polluted water in the presence of dissolved humic acid
2013
Critical review on recent developments in solventless techniques for extraction of analytes
2008
Polypotency of the immunomodulatory effect of pectins
2013
Application of biochar for the removal of pollutants from aqueous solutions
2015 Standout
Valorisation of citrus processing waste: A review
2018
Early development drug formulation on a chip: Fabrication of nanoparticles using a microfluidic spray dryer
2011
Structure–function relationships of immunostimulatory polysaccharides: A review
2015 Standout
Valorisation of Orange Peel Residues: Waste to Biochemicals and Nanoporous Materials
2012
Adsorption isotherm models: Classification, physical meaning, application and solving method
2020 Standout
Exploring the Mechanism Responsible for Cellulase Thermostability by Structure-Guided Recombination
2016 StandoutNobel
Effect of trehalose on protein structure
2008 Standout
Flavonoid composition of orange peel and its association with antioxidant and anti-inflammatory activities
2016 Standout
Mistakes and inconsistencies regarding adsorption of contaminants from aqueous solutions: A critical review
2017 Standout
A structural study of Hypocrea jecorina Cel5A
2011 StandoutNobel
pH-Responsive mechanised nanoparticles gated by semirotaxanes
2009 StandoutNobel
Abiotic and Biotic Stresses and Changes in the Lignin Content and Composition in Plants
2010
Essential oils: From extraction to encapsulation
2015 Standout
Preparation of magnetic modified chitosan and adsorption of Zn2+ from aqueous solutions
2011
Emerging Engineered Wood for Building Applications
2022 Standout
Adsorption of dyes and heavy metal ions by chitosan composites: A review
2010 Standout
Carbon accounting: a systematic literature review
2012 Standout
Whey protein gels for the entrapment of bioactive anthocyanins from bilberry extract
2011
Assessment of unsteady RANS in predicting swirl flow instability based on LES and experiments
2004
Food protein-based materials as nutraceutical delivery systems
2006 Standout
Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review
2013 Standout
Mild Acetosolv Process To Fractionate Bamboo for the Biorefinery: Structural and Antioxidant Properties of the Dissolved Lignin
2012
New Generation Adsorbents for Water Treatment
2012 Standout
Paving the Way for Lignin Valorisation: Recent Advances in Bioengineering, Biorefining and Catalysis
2016 Standout
Phase-averaged velocity in a fluidic precessing jet nozzle and in its near external field
2003
Trojan particles: Large porous carriers of nanoparticles for drug delivery
2002
Colour Measurement and Analysis in Fresh and Processed Foods: A Review
2012 Standout
Food waste as a valuable resource for the production of chemicals, materials and fuels. Current situation and global perspective
2012 Standout
Bioactives from Agri-Food Wastes: Present Insights and Future Challenges
2020 Standout
Advances in understanding alkali-activated materials
2015 Standout
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
2018 Standout
Virtual laboratories for education in science, technology, and engineering: A review
2016 Standout
Recirculation and flowfield regimes of unconfined non-reacting swirling flows
2003
Influence of process conditions on the physicochemical properties of açai (Euterpe oleraceae Mart.) powder produced by spray drying
2008 Standout
Encapsulation of polyphenols – a review
2010 Standout
Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers
2015 Standout
Insecticidal activity of microencapsulated Schinus molle essential oil
2014
A life-cycle assessment of Portland cement manufacturing: comparing the traditional process with alternative technologies
2008 Standout
Modeling chemical and physical processes of wood and biomass pyrolysis
2007 Standout
Heat pump dehumidifier drying of food
1997
Recovery of high added-value components from food wastes: Conventional, emerging technologies and commercialized applications
2012 Standout
Advances in heat pump systems: A review
2010 Standout
Drying characteristics of wood cylinders for conditions pertinent to fixed-bed countercurrent gasification
2003
Preparation of Nickel hydroxide nanoplates modified activated carbon for Malachite Green removal from solutions: Kinetic, thermodynamic, isotherm and antibacterial studies
2016
Spray Drying of Raisin Juice Concentrate
2006
Influence of low and high molecular weight compounds on the permeate flux decline in nanofiltration of red grape must
2012
Microwave steam diffusion for extraction of essential oil from orange peel: Kinetic data, extract’s global yield and mechanism
2010
Sugar reduction in musts with nanofiltration membranes to obtain low alcohol-content wines
2010
Identification of parameters for embodied energy measurement: A literature review
2010
Engineered thermostable fungal cellulases exhibit efficient synergistic cellulose hydrolysis at elevated temperatures
2014 StandoutNobel
Preparation and characterization of magnetic chitosan nanoparticles and its application for Cu(II) removal
2011
Nanofiltration membranes review: Recent advances and future prospects
2014 Standout
Heat and mass transfer in wooden dowels during a simulated fire: an experimental and analytical study
1996
Microencapsulation
2004 Standout
Applications of spray-drying in microencapsulation of food ingredients: An overview
2007 Standout
A review of oscillation mechanisms and the role of the precessing vortex core (PVC) in swirl combustion systems
2006 Standout
Swirl flow structure and flame characteristics in a model lean premixed combustor
2003
A review on heavy metal pollution, toxicity and remedial measures: Current trends and future perspectives
2019 Standout
Microwave-assisted extraction of phenolic compounds from wine lees and spray-drying of the extract
2010
Cost–Benefit Analysis of Medium-Density Fiberboard Production by Adding Fiber from Recycled Medium-Density Fiberboard
2018
A glass transition temperature approach for the prediction of the surface stickiness of a drying droplet during spray drying
2004
Microwave-Assisted Extraction of Flavonoids: A Review
2011
Hands-on experiences of undergraduate students in Automatics and Robotics using a virtual and remote laboratory
2011
Food Waste and Byproducts: An Opportunity to Minimize Malnutrition and Hunger in Developing Countries
2018
Microwave assisted extraction of secondary metabolites from plants: Current status and future directions
2011
Analytical Eco-Scale for assessing the greenness of analytical procedures
2012 Standout
Molecular imprinting: perspectives and applications
2016 Standout
New synthetic routes towards MOF production at scale
2017 Standout
Techniques for Analysis of Plant Phenolic Compounds
2013 Standout
Works of T.A.G. Langrish being referenced
Wood versus Concrete and Steel in House Construction: A Life Cycle Assessment
2002
Blended Teaching and Learning of Computer Programming Skills in Engineering Curricula.
2009
Water-based extraction of pectin from flavedo and albedo of orange peels
2006
A high-temperature drying model for softwood timber
2000
Simulation of Turbulent Swirl Flow in an Axisymmetric Sudden Expansion
2001
Optimisation of total phenolic acids extraction from mandarin peels using microwave energy: The importance of the Maillard reaction
2011
Crystallization of Amorphous Components in Spray-Dried Powders
2007
Adsorption of Chromium(VI) from Aqueous Solutions Using Cross-Linked Magnetic Chitosan Beads
2009
The effect of surface composition on the functional properties of milk powders
2005
A Computational Fluid Dynamics Study of a Tall-Form Spray Dryer
2002
New Engineered Particles from Spray Dryers: Research Needs in Spray Drying
2007
Modelling the temperature profiles within boards during the high-temperature drying of Pinus radiata timber: the influence of airflow reversals
1995
Removal of Cr(VI) from aqueous solution using activated carbon modified with nitric acid
2009
An Investigation and Quantitative Assessment of Particle Shape in Milk Powders from a Laboratory-Scale Spray Dryer
2006
Spray drying bioactive orange-peel extracts produced by Soxhlet extraction: Use of WPI, antioxidant activity and moisture sorption isotherms
2016
Environmentally friendly bagasse pulping with NH4OH–KOH–AQ
2007
A COMPARISON OF DIFFERENT TECHNIQUES FOR WATER-BASED EXTRACTION OF PECTIN FROM ORANGE PEELS
2008
Spray drying of food ingredients and applications of CFD in spray drying
2001
CFD simulation of precession in sudden pipe expansion flows with low inlet swirl
2002
Numerical Simulation of Unsteady Turbulent Flow in Axisymmetric Sudden Expansions
2001
An Investigation of Milk Powders Produced by a Laboratory-Scale Spray Dryer
2005
Mass Transfer Analysis of Spinning Cone Columns Using CFD
2004
A new pulping process for wheat straw to reduce problems with the discharge of black liquor
2006
COMPARISON OF GLASS TRANSITION TEMPERATURE AND STICKY POINT TEMPERATURE FOR SKIM MILK POWDER
2002
Development and characterisation of novel nutraceuticals with spray drying technology
2007
The effect of temperature on the crystallinity of lactose powders produced by spray drying
2007
Prospects for the Modelling and Design of Spray Dryers in the 21st Century
2003
An Experimental Test of the Concept of the Characteristic Drying Curve Using the Thin-Layer Method
1995
CFD Analysis of Scale Effects in Spinning Cone Columns
2005
A review of process simulations and the use of additives in spray drying
2008
Comparisons between different techniques for water-based extraction of pectin from orange peels
2007
Assessment of colour development in dried bananas – measurements and implications for modelling
2009
NEW MEASUREMENTS OF THE STICKY BEHAVIOR OF SKIM MILK POWDER
2001