Citation Impact
Citing Papers
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
2012 Standout
Valley-selective circular dichroism of monolayer molybdenum disulphide
2012 Standout
Vortices in high-temperature superconductors
1994 Standout
The role of dislocations in the flow stress grain size relationships
1970
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Linear Magnetization Dependence of the Intrinsic Anomalous Hall Effect
2006
First Principles Calculation of Anomalous Hall Conductivity in Ferromagnetic bcc Fe
2004
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
2018 Nature
Weyl Semimetal in a Topological Insulator Multilayer
2011 Standout
Entropy-stabilized oxides
2015 Standout
Proper Scaling of the Anomalous Hall Effect
2009 Standout
High tensile ductility in a nanostructured metal
2002 StandoutNature
High-strength sputter-deposited Cu foils with preferred orientation of nanoscale growth twins
2006
Creep of SiC-Whisker reinforced Si3N4
1988
Characterization of oxide structures formed on nickel-chromium alloy during low pressure oxidation at 500?600�C
1990
Recent developments in stainless steels
2009 Standout
Structural and electronic properties of boron nitride thin films containing silicon
1998 StandoutNobel
Defects in Silicon Carbide Whiskers
1984
A critical review of high entropy alloys and related concepts
2016 Standout
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
Microstructures of GaN films deposited on (001) and (111) Si substrates using electron cyclotron resonance assisted-molecular beam epitaxy
1994
Radiation hardening in single crystal niobium—The temperature dependence of yielding
1969
High-temperature fracture and diffusional deformation mechanisms in Si-Al-O-N ceramics
1980
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Deformation twinning in Al-4.8 wt% Mg
1988
Topological insulators and superconductors
2011 Standout
Transport theory for disordered multiple-band systems: Anomalous Hall effect and anisotropic magnetoresistance
2009
Anomalous Hall effect in a two-dimensional electron gas
2007
THE LINEAR HARDENING OF CADMIUM
1967
Review of advances in cubic boron nitride film synthesis
1997
A comprehensive review of ZnO materials and devices
2005 Standout
Thin film deposition and microelectronic and optoelectronic device fabrication and characterization in monocrystalline alpha and beta silicon carbide
1991 StandoutNobel
Microstructural characterization of a creep-deformed SiC whisker-reinforced Si3N4
1991 StandoutNobel
Sur le glissement dévié des dislocations dans la structure cubique à faces centrées
1968
Temperature dependence of the anomalous Hall conductivity in the Heusler alloyCo 2 Cr Al
2006
The diversity of stacking fault energy determinations and its significance
1969
Some surprising features of the plastic deformation of body-centered cubic metals and alloys
1983 Standout
Compressive creep of Si3N4/MgO alloys
1980
Atomistic simulations of dislocation–interface interactions in the Cu-Ni multilayer system
2000
High‐Temperature Environmental Strength Degradation of a Hot‐Pressed Silicon Nitride: An Experimental Test
1983
Kinetics and Mechanisms of High-Temperature Creep in Silicon Carbide: I, Reaction-Bonded
1984 StandoutNobel
Deformation twinning
1995 Standout
A study of the stress state associated with twin nucleation and propagation in anisotropic materials
1993
Deformation structures in ball milled copper
1996
NK
1997 StandoutNobel
Quantum transport theory of anomalous electric, thermoelectric, and thermal Hall effects in ferromagnets
2008
Gradient twinned 304 stainless steels for high strength and high ductility
2016
Strain-hardening of polycrystals: The α-brasses
1974
Effects of grain size on the dislocation density and flow stress of niobium
1967
A statistical theory of flow stress and work-hardening
1966
Experimental and theoretical investigation of the order-disorder transformation in Ni3Al
1993
A Comparison of Reducing and Oxidizing Heat Treatments of Hot‐Pressed Silicon Nitride
1983
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
The shape of a blocked deformation twin
1994
The influence of polycrystal grain size on several mechanical properties of materials
1970
A thin twin and its interaction with a coherent twin boundary in copper
1970
Deformation twinning in silver-and copper-alloy crystals
1974
Grain-size strengthening in terms of dislocation density measured by resistivity
1991
On the Equilibrium Thickness of Intergranular Glass Phases in Ceramic Materials
1987
Mechanical alloying and milling
2001 Standout
Electron microscopic studies in the yield region of 70/30-α-brass single crystals—II. Estimation of the dislocation friction stress
1975
Boson localization and correlated pinning of superconducting vortex arrays
1993
Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel
2011
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Deformation twinning in nanocrystalline materials
2011
Deformation properties of vanadium single crystals
1970
Deformation and microstructural changes in SiC whisker-reinforced Si3N4 composites
1991 StandoutNobel
Continual mechanical twinning
1965
Thermally-activated deformation of BCC metals and alloys
1992
Twinning Deformation in Single Crystals of Cu-8 at%Al Alloy
1977
Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals
2011
Anomalous Hall effect in three ferromagnetic compounds:Eu Fe 4 Sb 12 Yb 14 Mn Sb 11 Eu 8 Ga 16 Ge 30
2006
Correlations between stress, strain and dislocation arrangement in weakly deformed copper single crystals
1976
The Effect of Orientation on the Yielding and Flow of Molybdenum Single Crystals
1966
Continual mechanical twinning
1965
Flicker (1/f) noise in copper films due to radiation-induced defects
1988 StandoutNobel
Tensile properties of copper with nano-scale twins
2005
Quantized Anomalous Hall Effect in Magnetic Topological Insulators
2010 StandoutScience
Physical and mechanical properties of the B2 compound NiAl
1993
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Dislocation reactions during deformation twinning in Cu-11at.% Al single crystals
1980
Modelling of work hardening and stress saturation in FCC metals
1997
Anomalous Hall resistivity of cobalt films: Evidence for the intrinsic spin-orbit effect
2005
Sensitivity of deformation twinning to grain size in titanium and magnesium
2011
Dissociated $$ \frac{1}{3}\langle 0\bar{1}11\rangle $$ 1 3 〈 0 1 ¯ 11 〉 dislocations in Bi2Te3 and their relationship to seven-layer Bi3Te4 defects
2014
Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, experiments
2012
The strengthening or weakening of polycrystals due to the presence of grain boundaries
1974
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites
2005 Standout
Kinetics and Mechanisms of High‐Temperature Creep in Silicon Carbide: II, Chemically Vapor Deposited
1984 StandoutNobel
Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Cr, Mn, Fe, Co and Ni
2010 Standout
The asymmetric temperature dependence of yield stress in tantalum single crystals at low temperatures
1971
Dislocation-Based Deformation Mechanisms in Metallic Nanolaminates
1999
Theory of plastic deformation: - properties of low energy dislocation structures
1989
High‐Temperature Microstructure of a Hot‐Pressed Silicon Nitride
1989
Electronic and structural properties of SnxTi1−xO2 solid solutions: a periodic DFT study
2003
The flow stress gradient between the surface and centre of deformed copper single crystals
1968
Theory of workhardening 1934-1984
1985
Anomalous Hall effect
2010 Standout
The effect of nitrogen on stacking fault energy of Fe-Ni-Cr-Mn steels
1980
Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life
2019
The plasticity of pure single crystals
1964
Description of tantalum deformation behavior by dislocation mechanics based constitutive relations
1990
Berry phase effects on electronic properties
2010 Standout
The onset of twinning in metals: a constitutive description
2001 Standout
Growth of ZnO Thin Films on LiNbO3 Substrates by Electron Cyclotron Resonance-Assisted Molecular Beam Epitaxy
1998
High optical polarization ratio from semipolar (202¯1¯) blue-green InGaN/GaN light-emitting diodes
2011 StandoutNobel
Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals
1983
Mechanical properties of a nanocrystalline Co–Cu alloy with a high-density fine nanoscale lamellar structure
2008
Microband formation in shock-loaded and quasi-statically deformed metals
1989
Comment on “Weyl fermions and the anomalous Hall effect in metallic ferromagnets”
2014 StandoutNobel
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Nano-sized twins induce high rate sensitivity of flow stress in pure copper
2005
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Tensile properties of high- and medium-entropy alloys
2013
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Shapes of grain inclusions in crystals
1985
Effect of nonhydrostaticity on the pressure induced phase transformation of rhombohedral boron nitride
1997 StandoutNobel
The formation of microbands by cross-slips
1983
Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals
2008
Stacking-Fault Energy of a Ag-In Alloy from Node Measurements
1966
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
The interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of fcc metals and alloys
1981
Rapid solidification of intermetallic compounds
1988
Ultrahigh Strength and High Electrical Conductivity in Copper
2004 StandoutScience
Advanced Nanoarchitectures for Solar Photocatalytic Applications
2011 Standout
Microstructural Changes in β‐Silicon Nitride Grains upon Crystallizing the Grain‐Boundary Glass
1989
Activation analysis of deformation in evaporated molybdenum thin films
2003
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
Sample Dimensions Influence Strength and Crystal Plasticity
2004 StandoutScience
In situobservations of deformation twinning in Cu-8 at.° Ge single crystals
1981
Dislocation modelling of shear in f.c.c. crystals
1985
Polytypic transformations in silicon carbide
1983
Electron emission measurements and the defect structure of ?-Al2O3
1984
The influence of alloying, temperature, and related effects on the stacking fault energy
1970 Standout
High‐Resolution Electron Microscopy Observations of Stacking Faults in β‐SiC
1989
Toward A Sound Understanding of Dislocation Plasticity
1991
Matrix characterization of fibre-reinforced SiC matrix composites fabricated by chemical vapour infiltration
1995 StandoutNobel
Interrelationship between slip and twinning in B.C.C. crystals
1975
The Microstructure and Distribution of Impurities in Hot‐Pressed and Sintered Silicon Nitrides
1979
Determination of the Parameters of Native Disorder in α‐Al 2 O 3
1982
On deformation twinning in b.c.c. metals
1993
Twinning, slip and catastrophic flow in niobium
1966
Microstructure and Grain‐Boundary Composition of Hot‐Pressed Silicon Nitride With Yttria and Alumina
1983
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
2015 StandoutScience
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
The effect of stress on the shape of a blocked deformation twin
1996
Die durch Plastizitätsuntersuchungen bestimmte Stapelfehlerenergie von Silber im Temperaturbereich 172°K bis 873°K
1963
The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metals
2005
Theoretical evidence of the Berry-phase mechanism in anomalous Hall transport: First-principles studies ofCu Cr 2 Se 4 − x Br x
2007
Determination of the threshold-energy surface for copper usingin-situelectrical-resistivity measurements in the high-voltage electron microscope
1981
Amorphization and disordering of the Ni3Al ordered intermetallic by mechanical milling
1990
FeAl alloy disordered by ball-milling
1995
Works of T. E. Mitchell being referenced
Orientation dependence of the threshold displacement energy in copper and vanadium
1975
Residual stresses in polycrystalline Cu/Cr multilayered thin films
2000
Thin films of cubic boron nitride on silicon
1995
Impurity Phases in Hot‐Pressed Si 3 N 4
1978
Nanoscale-twinning-induced strengthening in austenitic stainless steel thin films
2004
Dislocation arrangements in tantalum single crystals deformed in tension at 373°K
1966
Precipitation in star sapphire III. Chemical effects accompanying precipitation
1980
Application of Transmission Electron Microscopy to the Study of Deformation in Ceramic Oxides
1979
Dislocation Pile‐ups in Anisotropic Crystals
1965
Precipitation in star sapphire I. Identification of the precipitate
1980
Irradiation induced order-disorder in Ni3Al and NiAl
1983
The dependence of cross-slip on stacking-fault energy in face-centred cubic metals and alloys
1962
Deformation twinning in alloys at low temperatures
1962
STAGE II WORK HARDENING IN CRYSTALS
1967
Stress and Dilatation Fields of the 〈111〉 Dislocation in Cubic Crystals
1967
Discussion of “Grain Boundary Phases in a Hot‐Pressed MgO Fluxed Silicon Nitride”
1978
Subsolidus Equilibria in the TiO 2 ‐SnO 2 System
1975
The stress-fields around groups of dislocations in face-centred cubic metals
1964
Interstitial solution hardening in tantalum single crystals
1970
Slip in body-centred cubic crystals
1968
ChemInform Abstract: IMPURITY PHASES IN HOT‐PRESSED SILICON NITRIDE
1978
Solution hardening by aliovalent cations in ionic crystals
1977
Defect aggregation in irradiated Ni3Al and NiAl
1982
Oxide-formation characteristics in the early stages of oxidation of Fe and Fe-Cr alloys
1983
Solid solution softening and hardening
1973
Climb dissociation of dislocations in sapphire (α-Al2O3)
1976
The detection of secondary slip during the deformation of copper and α-brass single crystals
1964
β→α Transformation in Polycrystalline SiC: I, Microstructural Aspects
1978
The work-hardening characteristics of Cu and α-brass single crystals between 4•2 and 500°K
1963
Discussion of ?Microstructural characterization of ?REFEL? (reaction-bonded) silicon carbides?
1979
Study of high-quality epitaxial YBCO thin films grown directly on Y-Cut LiNbO3
1996
Work-hardening in niobium single crystals
1963
The shape, configuration and stress field of twins and martensite plates
1991
Stresses on secondary systems due to piled-up groups of dislocations of arbitrary orientation
1966
The β→α Transformation in Polycrystalline SiC: IV, A Comparison of Conventionally Sintered, Hot‐Pressed, Reaction‐Sintered, and Chemically Vapor‐Deposited Samples
1981
Three-stage hardening in tantalum single crystals
1965
Residual stresses and ion implantation effects in Cr thin films
1999
The strain-rate dependence of the flow stress of copper single crystals
1962
Three-stage hardening in vanadium single crystals
1970