Citation Impact
Citing Papers
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Static recrystallization of SiO2-particle containing {011}<100> copper single crystals
2003
Recent developments in stainless steels
2009 Standout
Stability of nugget zone grain structures in high strength Al-alloy friction stir welds during solution treatment
2003
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Cemented carbide microstructures: a review
2018 Standout
Inverse Hall–Petch behavior in diamantane stabilized bulk nanocrystalline aluminum
2012
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
2009 Standout
Superplasticity—Recent advances and future directions
1989 Standout
Cavitation and fracture in the superplastic Al-33% Cu eutectic alloy
1989
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
High-Strength Low-Alloy (HSLA) Mg–Zn–Ca Alloys with Excellent Biodegradation Performance
2014
Wear mechanisms of WC–10Ni3Al carbide tool in dry turning of Ti6Al4V
2014
Effect of alloying elements on metadynamic recrystallization in HSLA steels
1995
Comparison of the wear behavior of WC/(FeAl-B) and WC-Co composites at high temperatures
2017
Fracture processes in superplastic flow
1982
High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composite
2010
Friction stir welding and processing
2005 Standout
Microstructure evolution during dynamic discontinuous recrystallization in particle-containing Cu
2014
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Influence of strain rate on interpass softening during the simulated warm rolling of interstitial-free steels
1993
The mechanical properties of superplastic materials
1982
Deformation Mechanisms in High-Al Bearing High-Mn TWIP Steels in Hot Compression and in Tension at Low Temperatures
2007
Microstructure behavior of Al–Mg–Sc alloy processed by ECAP at elevated temperature
2008
Friction stir welding of aluminium alloys
2009 Standout
Effect of particle/matrix interfacial character on the high-temperature deformation and recrystallization behavior of Cu with dispersed Fe particles
2008
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Investigation of the corrosion behavior of WC–FeAl–B composites in aqueous media
2012
Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al–Sc alloy
2004
Through-process modelling of microstructure evolution in hot forming of steels
2002
Hot working characteristics of steels in austenitic state
1995
Current issues in recrystallization: a review
1997 Standout
The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels
2007
Constitutive analysis in hot working
2002
Hydrodynamical behaviour of a two-phase superplastic alloy: α/β brass
1980
Works of T. Chandra being referenced
Dynamic precipitation and solute hardening in a titanium microalloyed steel containing three levels of manganese
1984
Influence of dynamic recovery and dynamic recrystallization on coarsening of Nb(CN) in Nb microalloyed steel
1982
The Effect of Ti and Ti-Nb Additions on .ALPHA. Formation and Restoration during Intercritical Rolling and Holding of C-Mn Structural Steels.
1991
Grain-boundary sliding and intergranular cavitation during superplastic deformation of α/β brass
1978
Liquid Phase Sintering of WC-FeAl and WC-Ni<sub>3</sub>Al Composites with and without Boron
2003
Abrasive wear of WC–FeAl–B and WC–Ni3Al–B composites
2005
Grain Growth Predictions in Microalloyed Steels.
1996
The Effect of Boron on the Hardness and Fracture Toughness of WC-FeAl-B and WC-Ni<sub>3</sub>Al-B Composites
2007
Fracture behaviour of a SiC-particle-reinforced aluminium alloy at high temperature
1998
Five Decades of the Zener Equation.
1998