Standout Papers
Citation Impact
Citing Papers
Assessment of hydrogen direct reduction for fossil-free steelmaking
2018 Standout
Solar Thermochemical Water-Splitting Ferrite-Cycle Heat Engines
2008
Characteristics of steel slag under different cooling conditions
2006
Advanced structural ceramics in aerospace propulsion
2016 Standout
Thermodynamic behavior of rare metals in the melting process of municipal solid waste (MSW) incineration residues
2007
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
A review and perspective of efficient hydrogen generation via solar thermal water splitting
2015
Influence of fuel ash composition on high temperature aerosol formation in fixed bed combustion of woody biomass pellets
2006
Thermodynamic analysis of a biomass anaerobic gasification process for hydrogen production with sufficient CaO
2007
Materials Informatics
2005
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
2010 Standout
Understanding Materials Compatibility
2003
Thermodynamic analysis of synthetic hydrocarbon fuel production in pressurized solid oxide electrolysis cells
2012
Design study of a 150kWth double loop circulating fluidized bed reactor system for chemical looping combustion with focus on industrial applicability and pressurization
2010
Progress in Chemical-Looping Combustion and Reforming technologies
2011 Standout
Influence of leaching pretreatment on fuel properties of biomass
2014
Review of hydrogen production using chemical-looping technology
2017 Standout
Smart Energy Systems for coherent 100% renewable energy and transport solutions
2015 Standout
Review of sewage sludge management: standards, regulations and analytical methods
2014 Standout
Relation between Coal Mineral Matter and Deposit Mineralogy in Pulverized Fuel Furnaces
2013
Smelting of Bauxite Residue (Red Mud) in View of Iron and Selective Rare Earths Recovery
2015
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Progress and Perspectives of Electrochemical CO2 Reduction on Copper in Aqueous Electrolyte
2019 Standout
Characteristics and environmental aspects of slag: A review
2014 Standout
Determination of the Critical Strains for the Initiation of Dynamic Transformation and Dynamic Recrystallization in Four Steels of Increasing Carbon Contents
2012
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Production of nepheline/quartz ceramics from geopolymer mortars
2012
Thermophysical properties enhancement of ternary carbonates with carbon materials for high-temperature thermal energy storage
2017
Thermal energy storage using chloride salts and their eutectics
2016
Modeling and simulation of hydrogen injection into a blast furnace to reduce carbon dioxide emissions
2017
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Sustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energy
2010 Standout
Advances in understanding alkali-activated materials
2015 Standout
Thermodynamic comparison of solar methane reforming via catalytic and redox cycle routes
2021
The role of metal nanoparticles in the catalytic production of single-walled carbon nanotubes—a review
2003
Biomass fly ash in concrete: Mixture proportioning and mechanical properties
2007 Standout
Recent advances in solid oxide cell technology for electrolysis
2020 StandoutScience
Mineral matter transformation during Sasol-Lurgi fixed bed dry bottom gasification – utilization of HT-XRD and FactSage modelling
2006
Towards a comprehensive thermodynamic database for ash-forming elements in biomass and waste combustion — Current situation and future developments
2011
Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: A review
2017 Standout
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
2014 Standout
Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage
2018 Standout
Corrosion resistance of Hastelloys in molten metal-chloride heat-transfer fluids for concentrating solar power applications
2014
Proton-Conducting Oxides
2003 Standout
Steels for bearings
2011 Standout
A pragmatic model for selective laser melting with evaporation
2009
High temperature elemental losses and mineralogical changes in common biomass ashes
2005
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
2017 Standout
Recent advances and applications of machine learning in solid-state materials science
2019 Standout
High-pressure synthesis and optical properties of nanodiamonds obtained from halogenated adamantanes
2020 StandoutNobel
Phase equilibria and thermodynamics of the Fe–Al–C system: Critical evaluation, experiment and thermodynamic optimization
2014
Hydrogen Production via Chemical Looping Redox Cycles Using Atomic Layer Deposition-Synthesized Iron Oxide and Cobalt Ferrites
2011
A review on the utilization of fly ash
2009 Standout
Towards additive manufacturing of magnesium alloys through integration of binderless 3D printing and rapid microwave sintering
2019
Water Vapor–Mediated Volatilization of High-Temperature Materials
2013
Poisoning of Solid Oxide Electrolysis Cells by Impurities
2010
Hydrogen as an energy vector
2019 Standout
Quantification of the release of inorganic elements from biofuels
2007
Condensation in the KCl–NaCl system
2011
The composition, recycling and utilisation of Bayer red mud
2018 Standout
GEM-Selektor geochemical modeling package: revised algorithm and GEMS3K numerical kernel for coupled simulation codes
2012
An overview of advances in biomass gasification
2016 Standout
High temperature interaction of Al/Si-modified Fe–Cr alloys with KCl
2006
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
2015 Standout
Defining a Materials Database for the Design of Copper Binary Alloy Catalysts for Electrochemical CO2 Conversion
2018
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
Enthalpy of Formation of Carbon‐Rich Polymer‐Derived Amorphous SiCN Ceramics
2008
Ash-forming elements in four Scandinavian wood species. Part 1: Summer harvest
2005
In-situ synthesizing carbon nanotubes on cement to develop self-sensing cementitious composites for smart high-speed rail infrastructures
2022 Standout
The role of hydrogen and fuel cells in the global energy system
2018 Standout
Cemdata18: A chemical thermodynamic database for hydrated Portland cements and alkali-activated materials
2018 Standout
Carbon nanotube reinforced cementitious composites: An overview
2016 Standout
Graphite, Tubular PAHs, and the Diffuse Interstellar Bands
2006 StandoutNobel
Development of a modeling approach to predict ash formation during co-firing of coal and biomass
2009
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
2017 Standout
Chemical Reaction of Glazed Refractory with Al-deoxidized and Ca-treated Molten Steel
2010
An overview of the composition and application of biomass ash. Part 1. Phase–mineral and chemical composition and classification
2012 Standout
An overview of the chemical composition of biomass
2009 Standout
Influence of phosphorus on sulphur capture during co-firing of sewage sludge with wood or bark in a fluidised bed
2006
A paradigm shift towards compositionally zero-sum binderless 3D printing of magnesium alloys via capillary-mediated bridging
2018
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
2010 Standout
Energetics of Si x O y C z Polymer‐Derived Ceramics Prepared Under Varying Conditions
2008
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
Analysis, origin and significance of mineral matter in coal: An updated review
2016 Standout
Thermodynamically Stable Si w C x N y O z Polymer‐Like, Amorphous Ceramics Made from Organic Precursors
2008
Thermodynamically Stable Si x O y C z Polymer‐Like Amorphous Ceramics
2007
Ash-forming elements in four Scandinavian wood species part 3: Combustion of five spruce samples
2010
Use of hybrid MCDM methods for site location of solar-powered hydrogen production plants in Uzbekistan
2022 Standout
High Temperature Electrolysis in Alkaline Cells, Solid Proton Conducting Cells, and Solid Oxide Cells
2014
Carbon nanotubes and nanofibers in catalysis
2003 Standout
Alkaline electrolysis cell at high temperature and pressure of 250 °C and 42 bar
2012
Thermochemistry of nanodiamond terminated by oxygen containing functional groups
2014
Recent developments in phase change materials for energy storage applications: A review
2018 Standout
Ash Transformation Chemistry during Combustion of Biomass
2011
Chemical, Mineralogical, and Morphological Properties of Steel Slag
2011 Standout
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Works of Stephan Petersen being referenced
FactSage thermochemical software and databases
2002 Standout
FactSage thermochemical software and databases — recent developments
2008 Standout
The thermochemistry library ChemApp and its applications
2007
FactSage thermochemical software and databases, 2010–2016
2016 Standout