Citation Impact
Citing Papers
Improved fatigue properties of ultrafine-grained copper under cyclic torsion loading
2013
Microscopic mechanisms contributing to the synchronous improvement of strength and plasticity (SISP) for TWIP copper alloys
2015
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Generalized stacking fault energies of alloys
2014
In vitro corrosion, cytotoxicity and hemocompatibility of bulk nanocrystalline pure iron
2010
Corrosion fatigue behavior of a biocompatible ultrafine-grained niobium alloy in simulated body fluid
2011
Development of new metallic alloys for biomedical applications
2012 Standout
Correlation between process parameters, grain size and hardness of friction‐stir‐welded Cu–Zn alloys
2016
Recent developments in stainless steels
2009 Standout
Fatigue notch sensitivity of ultrafine-grained copper
2004
Eyeriss: An Energy-Efficient Reconfigurable Accelerator for Deep Convolutional Neural Networks
2016 Standout
An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe–Mn–Si–Al twinning-induced plasticity steel
2015
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Effect of volume fraction of gradient nanograined layer on high-cycle fatigue behavior of Cu
2018
Texture evolution in equal-channel angular extrusion
2009
Grain size effects on the austenitization process in a nanostructured ferritic steel
2011
Effects of grain refinement due to severe plastic deformation on the growth behavior of small cracks in copper
2012
Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel
2014
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics
2014
The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review
2014
Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation
2004
Mechanical properties of nanocrystalline materials
2005 Standout
Improved fatigue resistance of gradient nanograined Cu
2018
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel
2012
Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation
2006
General relationship between strength and hardness
2011 Standout
Orientation stability in equal channel angular extrusion. Part II: Hexagonal close-packed materials
2008
Shear bands at the fatigue crack tip of nanocrystalline nickel
2007
Evolution of microstructural homogeneity in copper processed by high-pressure torsion
2010
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
2006 Standout
Microstructural evolution and mechanical properties of Cu–Al alloys subjected to equal channel angular pressing
2009
Plešovice zircon — A new natural reference material for U–Pb and Hf isotopic microanalysis
2007 Standout
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Friction Stir Processing Technology: A Review
2008 Standout
The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy
2008
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
2013
Nanostructure Evolution in an Austenitic Stainless Steel Subjected to Multiple Forging at Ambient Temperature
2010
Mechanical properties and nanostructures in a duplex stainless steel subjected to equal channel angular pressing
2012
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Deformation twinning in nanocrystalline materials
2011
Interface affected zone for optimal strength and ductility in heterogeneous laminate
2018
Orientation-dependent grain growth in a bulk nanocrystalline alloy during the uniaxial compressive deformation
2006
Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals
2009
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Abnormal grain coarsening in cyclically deformed gradient nanograined Cu
2017
Biodegradable metals
2014 Standout
Microstructures and mechanical properties of ultrafine grained pure Ti produced by severe plastic deformation
2010
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Revealing the relationship between grain size and corrosion rate of metals
2010 Standout
Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life
2019
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Development of a fuzzy logic based model to elucidate the effect of FSW parameters on the ultimate tensile strength and elongation of pure copper joints
2020
The influence of strain rate on the microstructure transition of 304 stainless steel
2011
Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryorolling
2011
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Effect of Grain Size on Corrosion: A Review
2010 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Effect of Equal-Channel Angular Pressing on the Pitting Corrosion Resistance of Al Alloy
2006
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Fatigue behavior of columnar-grained Cu with preferentially oriented nanoscale twins
2012
Cyclic deformation and fatigue properties of very fine-grained metals and alloys
2009
Effects of natural radiation damage on back-scattered electron images of single crystals of minerals
2006
Enhanced strength–ductility synergy in nanostructured Cu and Cu–Al alloys processed by high-pressure torsion and subsequent annealing
2011
The control of texture to improve high-cyclic fatigue performance in copper after equal channel angular pressing
2011
Fatigue strength, microstructural stability and strain localization in ultrafine-grained copper
2006
Fatigue, an everlasting materials problem - still en vogue
2010
Tensile behavior of columnar grained Cu with preferentially oriented nanoscale twins
2011
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Works of S.D. Wu being referenced
Effects of dislocation slip mode on high-cycle fatigue behaviors of ultrafine-grained Cu–Zn alloy processed by equal-channel angular pressing
2012
Influences of cyclic deformation and subsequent aging treatment on the tensile properties of Cu processed by equal-channel angular pressing
2007
The formation of PSB-like shear bands in cyclically deformed ultrafine grained copper processed by ECAP
2003
Significance of stacking fault energy in bulk nanostructured materials: Insights from Cu and its binary alloys as model systems
2018
Textures and mechanical behavior of Mg–3.3%Li alloy after ECAP
2004
Mechanical properties of a two-phase alloy Mg–8%Li–1%Al processed by equal channel angular pressing
2003
Anomalous hardening in copper due to the growth of deformation-induced micro-twins after annealing
2006
Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP
2007
Significance of stacking fault energy on microstructural evolution in Cu and Cu–Al alloys processed by high-pressure torsion
2011
Shear bands in cyclically deformed ultrafine grained copper processed by ECAP
2004
Microstructure, texture, grain boundaries in recrystallization regions in pure Cu ECAE samples
2003
Varying tensile fracture mechanisms of Cu and Cu–Zn alloys with reduced grain size: From necking to shearing instability
2013
Scanning electron microscopy-electron channelling contrast investigation of recrystallization during cyclic deformation of ultrafine grained copper processed by equal channel angular pressing
2002
Tensile properties and fracture mechanism of Al–Mg alloy subjected to equal channel angular pressing
2007
Direct observations of microstructural evolution in a two-phase Cu–Ag alloy processed by high-pressure torsion
2010
Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion
2010
Enhancement of mechanical properties of heat-resistant martensitic steel processed by equal channel angular pressing
2009
Microstructural evolution and shear fracture of Cu–16at.% Al alloy induced by equal channel angular pressing
2010
Formation mechanism of nanostructures in austenitic stainless steel during equal channel angular pressing
2007
Enhanced cyclic deformation responses of ultrafine-grained Cu and nanocrystalline Cu–Al alloys
2014
The effect of stacking fault energy on equilibrium grain size and tensile properties of nanostructured copper and copper–aluminum alloys processed by equal channel angular pressing
2012
Mechanical Behaviors of Ultrafine-Grained 301 Austenitic Stainless Steel Produced by Equal-Channel Angular Pressing
2010
Strain hardening behavior of a two-phase Cu–Ag alloy processed by high-pressure torsion
2011