Citation Impact
Citing Papers
Bioceramics: Material Characteristics versus In Vivo Behavior
1987
Scaffolds Based Bone Tissue Engineering: The Role of Chitosan
2011
Stereolithographic Bone Scaffold Design Parameters: Osteogenic Differentiation and Signal Expression
2010
Engineering Bone Regeneration with Bioabsorbable Scaffolds with Novel Microarchitecture
1999
The Design of Scaffolds for Use in Tissue Engineering. Part I. Traditional Factors
2001 Standout
Multilineage Cells from Human Adipose Tissue: Implications for Cell-Based Therapies
2001 Standout
Automatic Algorithm for Generating Complex Polyhedral Scaffold Structures for Tissue Engineering
2004
Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro‐architecture by rapid prototyping for bone‐tissue‐engineering research
2003
Hyaluronic Acid Hydrogels for Biomedical Applications
2011 Standout
Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds
2006
Osteoinduction in porous hydroxyapatite implanted in heterotopic sites of different animal models
1996
Scaffolds in tissue engineering bone and cartilage
2000 Standout
Zirconia as a ceramic biomaterial
1999 Standout
Tissue compatibility and stability of a new zirconia ceramic in vivo
1992
An evaluation of variables influencing implant fixation by direct bone apposition
1985
Macroporous biphasic calcium phosphate ceramics: Influence of five synthesis parameters on compressive strength
1996
Structural, mechanical and in vitro characterization of individually structured Ti–6Al–4V produced by direct laser forming
2005
Evolution of bone transplantation: molecular, cellular and tissue strategies to engineer human bone
1996
How useful is SBF in predicting in vivo bone bioactivity?
2006 Standout
Hydrogels in Regenerative Medicine
2009 Standout
Hydrogels for tissue engineering: scaffold design variables and applications
2003 Standout
Biphasic calcium phosphate bioceramics: preparation, properties and applications
2003 Standout
Commentary: Deciphering the link between architecture and biological response of a bone graft substitute
2010
Biodegradable polymeric scaffolds for musculoskeletal tissue engineering
2001
Three‐dimensional macroporous calcium phosphate bioceramics with nested chitosan sponges for load‐bearing bone implants
2002
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
2006 Standout
A novel amorphous calcium phosphate polymer ceramic for bone repair: I. Synthesis and characterization
2001
A three-dimensional osteochondral composite scaffold for articular cartilage repair
2002
Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel–titanium bone graft substitute
2003
Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods
2003
Pore diameter of more than 100 μm is not requisite for bone ingrowth in rabbits
2001
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
2003
The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in an in vivo model
2009
Shape memory properties of poly(d,l-lactide)/hydroxyapatite composites
2006
Magnesium and its alloys as orthopedic biomaterials: A review
2005 Standout
Development of a 95/5 poly(L ‐lactide‐co‐glycolide)/hydroxylapatite and β‐tricalcium phosphate scaffold as bone replacement material via selective laser sintering
2007
The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering
2009 Standout
In vivo behavior of calcium phosphate scaffolds with four different pore sizes
2006
Bioceramics of calcium orthophosphates
2009
TiO2 Nanotubes: Synthesis and Applications
2011 Standout
Osteoinduction by biomaterials—Physicochemical and structural influences
2006
3D bioactive composite scaffolds for bone tissue engineering
2017 Standout
Stimuli-responsive supramolecular polymeric materials
2012 Standout
Effect of Chemistry on Osteogenesis and Angiogenesis Towards Bone Tissue Engineering Using 3D Printed Scaffolds
2016
Bone substitute: Transforming β-tricalcium phosphate porous scaffolds into monetite
2008
Porosity of 3D biomaterial scaffolds and osteogenesis
2005 Standout
Stem cell technology and bioceramics: From cell to gene engineering
1999
Design of ceramic-based cements and putties for bone graft substitution
2010
Fabrication of porous biodegradable polymer scaffolds using a solvent merging/particulate leaching method
2001
Bone Response to Zirconia Ceramic Implants: An Experimental Study in Rabbits
2003
Alginate: Properties and biomedical applications
2011 Standout
Organocatalytic Ring-Opening Polymerization
2007 Standout
Synthesis of spherical calcium phosphate particles for dental and orthopedic applications
2013
Oriented bioactive glass (13-93) scaffolds with controllable pore size by unidirectional freezing of camphene-based suspensions: Microstructure and mechanical response
2010
Tissue-Engineered Bone Using Mesenchymal Stem Cells and a Biodegradable Scaffold
2004
Fabrication of hydroxyapatite ceramic with controlled porosity
1997
Effect of surface finish on the osseointegration of laser-treated titanium alloy implants
2003
Bioactive glass in tissue engineering
2011 Standout
Bioactivation of titanium surfaces using coatings of TiO2 nanotubes rapidly pre-loaded with synthetic hydroxyapatite
2009
Synergistic reinforcement of in situ hardening calcium phosphate composite scaffold for bone tissue engineering
2003
An overview of zirconia ceramics: Basic properties and clinical applications
2007 Standout
Ectopic bone formation via rhBMP-2 delivery from porous bioabsorbable polymer scaffolds
1998
Processing and characterization of porous alumina scaffolds
2002
Freeze casting of hydroxyapatite scaffolds for bone tissue engineering
2006
Biological reaction to alumina, zirconia, titanium and polyethylene particles implanted onto murine calvaria
2003
Capturing complex 3D tissue physiology in vitro
2006 Standout
Silk as a biocohesive sacrificial binder in the fabrication of hydroxyapatite load bearing scaffolds
2014
Fabrication of porous titanium scaffolds by stack sintering of microporous titanium spheres produced with centrifugal granulation technology
2014
Resorbable synthetic polymers s replacements for bone graft
1994
Biological and Medical Significance of Calcium Phosphates
2002 Standout
Hydroxyapatite/poly(ε-caprolactone) composite coatings on hydroxyapatite porous bone scaffold for drug delivery
2003
Porous scaffold design for tissue engineering
2005 Standout
Evaluation of particulate Bioglass� in a rabbit radius ostectomy model
1997
Osteoinduction of bone grafting materials for bone repair and regeneration
2015
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
2016 Standout
A highly porous 3-dimensional polyphosphazene polymer matrix for skeletal tissue regeneration
1996
Effect of nitinol implant porosity on cranial bone ingrowth and apposition after 6 weeks
1999
Effect of grain size and microporosity on the in vivo behaviour of β-tricalcium phosphate scaffolds
2014
Mechanical and in vitro performance of 13–93 bioactive glass scaffolds prepared by a polymer foam replication technique
2008
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
2007 Standout
The topographical effect of electrospun nanofibrous scaffolds on the in vivo and in vitro foreign body reaction
2009
Mediation of bone ingrowth in porous hydroxyapatite bone graft substitutes
2003
Zirconium oxide: analysis of MG63 osteoblast-like cell response by means of a microarray technology
2003
Freeze casting of porous hydroxyapatite scaffolds. II. Sintering, microstructure, and mechanical behavior
2008
Biomechanical Compatibility and Design of Ceramic Implants for Orthopedic Surgery
1988
Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure
2007
Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms
2010 Standout
Structural and human cellular assessment of a novel microsphere-based tissue engineered scaffold for bone repair
2002
Strong calcium phosphate cement‐chitosan‐mesh construct containing cell‐encapsulating hydrogel beads for bone tissue engineering
2006
Role of material surfaces in regulating bone and cartilage cell response
1996 Standout
Calcium phosphate cements: action of setting regulators on the properties of the β-tricalcium phosphate-monocalcium phosphate cements
1989
Mechanical properties of calcia stabilized zirconia following in vivo and in vitro aging
1975
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Molecular Mechanisms of Anti-Inflammatory Action of Erythromycin in Human Bronchial Epithelial Cells: Possible Role in the Signaling Pathway That Regulates Nuclear Factor-κB Activation
2004 StandoutNobel
Effect of hydroxyapatite impregnation on skeletal bonding of porous coated implants
1980
Tissue Engineering
1993 StandoutScience
Infections in bionic man: The pathobiology of infections in prosthetic devices—Part II
1982
Biocompatibility and osteogenesis of calcium phosphate composite scaffolds containing simvastatin-loaded PLGA microspheres for bone tissue engineering
2015
Thin-film multilayer interconnect technology for YBa2Cu3O7−x
1994 StandoutNobel
Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials
2015 Standout
Global gene expression of cells attached to a tissue engineering scaffold
2004 StandoutNobel
Sintering of hydroxylapatite-zirconia composite materials
1988
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Particle Size of Periodontal Bone Grafting Materials
1984
Freezing as a Path to Build Complex Composites
2006 StandoutScience
Tissue Engineering: Orthopedic Applications
1999
Sustained release emphasizing recombinant human bone morphogenetic protein-2
1998
Microporosity enhances bioactivity of synthetic bone graft substitutes
2005
Hierarchically porous materials: synthesis strategies and structure design
2016 Standout
Shear strength of loaded porous-glassy-carbon/bone interface—an experimental study on rabbits
1986
Filter cake forming and hot isostatic pressing for TZP-dispersed hydroxyapatite composite
1992
Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering
2010
Hydrogels for Tissue Engineering
2001 Standout
An evaluation of bone growth into porous high density polyethylene
1976
Mineralization of Synthetic Polymer Scaffolds: A Bottom-Up Approach for the Development of Artificial Bone
2005 StandoutNobel
Biodegradable polymers as biomaterials
2007 Standout
Bioactive Hydrogels with an Ordered Cellular Structure Combine Interconnected Macroporosity and Robust Mechanical Properties
2004
Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals
2014 Standout
Calcium phosphate bone graft substitutes: Failures and hopes
2012
Biomaterials
1980 Science
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Biodegradable ceramic implants in bone
1971
Biomaterial-Centered Infection: Microbial Adhesion Versus Tissue Integration
1987 StandoutScience
Scaffold Design for Bone Regeneration
2014
Tissue reaction to intrabony ceramic implants
1971
Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo
1999
The interface of various glasses and glass ceramics with a bony implantation bed
1985
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
2003 Standout
Preparation of pHEMA-CP composites with high interfacial adhesion via template-driven \nmineralization
2002 StandoutNobel
Effect of particle size on osteoinductive potential of microstructured biphasic calcium phosphate ceramic
2014
A novel method to fabricate bioabsorbable scaffolds
1995
Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?
2016 Standout
Re-evaluation of the biocompatibility of bioinert ceramics in vivo
1992
Third-Generation Biomedical Materials
2002 StandoutScience
Ceramic augmentation of the lower jaw
1977
Bioceramics: From Concept to Clinic
1991 Standout
Composite Titanium Dioxide Nanomaterials
2014
Novel Materials Applications of Pulsed Laser Deposition
1992
Macrolide antibiotics as biological response modifiers.
2000
Quantitative characterization of porous commercial and experimental bone graft substitutes with microcomputed tomography
2013
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
2003
Biodegradable polymers as biomaterials
1995
Surface-Active Biomaterials
1984 StandoutScience
Preparation and Compressive Strength Behavior of Porous Ceramics with β‐Ca(PO 3 ) 2 Fiber Skeletons
1997
Calcium phosphates in biomedical applications: materials for the future?
2015 Standout
Resorbable biomaterials as bone graft substitutes
2010
Works of Samuel Hulbert being referenced
Use of ceramics in surgical implants
1978
Potential of ceramic materials as permanently implantable skeletal prostheses
1970
Tissue reaction to three ceramics of porous and non‐porous structures
1972
Compatibility of porous ceramics with soft tissue; application to tracheal prostheses
1971
Alveolar Ridge Augmentation with Ceramics
1973
History of ceramic orthopedic implants
1972
The role of porous polymeric materials in prosthesis attachment
1974
Attachment of prostheses to the musculo‐skeletal system by tissue ingrowth and mechanical interlocking
1973
Use of alloplastics for ridge augmentation.
1971
History of bioceramics
1982
Effect of stress on tissue ingrowth into porous aluminum oxide
1974
Corrosion of Ti‐6Al‐4V in simulated body fluids and bovine plasma
1972
Dr. C. William Hall eulogy
1993
Application of porous ceramics for the attachment of load bearing internal orthopedic applications
1971