Citation Impact
Citing Papers
Electrochemical Oxidation and Reduction of the RuO2/Ti Electrode Surface
1978
A review of electrode materials for electrochemical supercapacitors
2011 Standout
Trends in activity for the water electrolyser reactions on 3d M(Ni,Co,Fe,Mn) hydr(oxy)oxide catalysts
2012 Standout
Materials for electrochemical capacitors
2008 Standout
A Cost‐Effective Supercapacitor Material of Ultrahigh Specific Capacitances: Spinel Nickel Cobaltite Aerogels from an Epoxide‐Driven Sol–Gel Process
2009 Standout
Recent developments in stainless steels
2009 Standout
1991 Whitney Award Lecture: Inhibitors—An Old Remedy for a New Challenge
1991
Ceramic Fuel Cells
1993 Standout
Toward the rational design of non-precious transition metal oxides for oxygen electrocatalysis
2015 Standout
Oxidation of Alcohols with Molecular Oxygen on Solid Catalysts
2004 Standout
Electrochemical investigation of the influence of nitrogen alloying on pitting corrosion of austenitic stainless steels
1999
Impedance Characteristics of Platinum Electrodes on Yttria‐Stabilized Zirconia
1993
Universality in Oxygen Evolution Electrocatalysis on Oxide Surfaces
2011 Standout
Achieving high energy density and high power density with pseudocapacitive materials
2019 Standout
Solar Water Splitting Cells
2010 Standout
Activation and hydrogen absorption in thermally prepared RuO2 and IrO2
2004
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
2004 Standout
Electrolysis of water on oxide surfaces
2007 Standout
Sol‐Gel Synthesis of a New Oxide‐Ion Conductor Sr‐ and Mg‐Doped LaGaO 3 Perovskite
1996 StandoutNobel
Electrochemical capacitors: mechanism, materials, systems, characterization and applications
2016 Standout
The Mechanism of Water Oxidation: From Electrolysis via Homogeneous to Biological Catalysis
2010 Standout
Electrocatalytic Oxygen Evolution Reaction (OER) on Ru, Ir, and Pt Catalysts: A Comparative Study of Nanoparticles and Bulk Materials
2012 Standout
Physical electrochemistry of ceramic oxides
1991
Electrochemical behavior of RuTi
1991 StandoutNobel
Enhancement of corrosion resistance of a biomedical grade 316LVM stainless steel by potentiodynamic cyclic polarization
2007
A comprehensive review on PEM water electrolysis
2013 Standout
Recent advances in zinc–air batteries
2014 Standout
High‐Rate Oxygen Evolution Reaction on Al‐Doped LiNiO2
2015 StandoutNobel
The oxygen electrode
1974
The anodic characteristics of modified Mn oxide electrode: Ti/RuOx/MnOx
1978
Effect of Cefazolin on the corrosion of mild steel in HCl solution
2009 Standout
Pitting corrosion of aluminum
1999 Standout
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Cobalt–Iron (Oxy)hydroxide Oxygen Evolution Electrocatalysts: The Role of Structure and Composition on Activity, Stability, and Mechanism
2015 Standout
“Inner” and “outer” active surface of RuO2 electrodes
1990 Standout
Separation of the polarization of a two-electron transfer reaction into those of consecutive one-electron transfer reactions by potential-step chronoamperometry in the oxidation of O2− ion by Pt/YSZ oxygen electrodes
1997
High Corrosion Resistance of Chromium-Bearing Amorphous Iron Alloys in Neutral and Acidic Solutions Containing Chloride
1976
Super duplex stainless steels
1992 Standout
Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions
2015 Standout
Ruthenium dioxide-based film electrodes
1978
Modelling of pitting corrosion in marine and offshore steel structures – A technical review
2015 Standout
Ruthenium dioxide: a new electrode material. I. Behaviour in acid solutions of inert electrolytes
1974
Cyclic voltammetry as a technique for determining the surface area of RuO2 electrodes
1979
Ruthenium dioxide: a new electrode material. II. Non-stoichiometry and energetics of electrode reactions in acid solutions
1975
Influence of the preparation temperature of Ruthenium dioxide on its point of zero charge
1983
Ammonia for power
2018 Standout
Application of the Pitting Resistance Equivalent Concept to Some Highly Alloyed Austenitic Stainless Steels
1998
Effect of Halide Ions on Electrochemical Behavior and Stress Corrosion Cracking of 67/33 α-Brass in Aqueous Environments
1996
Interfacial properties of oxides used as anodes in the electrochemical technology
1983
Design and Tailoring of the Nanotubular Arrayed Architecture of Hydrous RuO2 for Next Generation Supercapacitors
2006 Standout
Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel
2004 Standout
Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction
2015 Standout
Interfacial properties of oxides with technological impact in electrochemistry
1996
Application of Low Loss Amorphous Metals in Motors and Transformers
1982 StandoutNobel
Cobalt-based double-perovskite symmetrical electrodes with low thermal expansion for solid oxidefuel cells
2011 StandoutNobel
Review of Literature on Pitting Corrosion Published Since 1960
1971
Sr2CoMoO6 anode for solid oxide fuel cell running on H2 and CH4 fuels
2010 StandoutNobel
Chemical Structures and Performance of Perovskite Oxides
2001 Standout
Characteristics of cathodic polarization at Pt/YSZ interface without the effect of electrode microstructure
2003
The anodic characteristics of manganese dioxide electrodes prepared by thermal decomposition of manganese nitrate
1977
Self-discharge and potential recovery phenomena at thermally and electrochemically prepared RuO2 supercapacitor electrodes
1997
Proton diffusion in crystalline ruthenium dioxide
1980
Importance of electrode/zirconia interface morphology in high-temperature solid electrolyte cells
1987
The Effect of Ferrite Content on Stress Corrosion Cracking in Duplex Stainless Steel Weld Metals at Room Temperature
1979
A review of supercapacitor modeling, estimation, and applications: A control/management perspective
2017 Standout
On some debated aspects of the behaviour of RuO2 film electrodes
1978
Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
2014 Standout
Works of S. Torchio being referenced
Preparation, structure and electrical properties of thick ruthenium dioxide films
1972
Stress—corrosion cracking of austenitic stainless steel in hydrochloric acid media at room temperature
1973
Chemical etching and pitting ofstainless steel
1970
On the influence of the annealing temperature and heavy current treatments on the porous structure of platinum electrodes and on the kinetics of the oxygen reaction at high temperatures
1973
The influence of chloride ions on the stress corrosion cracking of Al-brass in acidic sulphate solutions
1986
Electronic properties of oxide films and pitting susceptibility of type 304 stainless steel
1972