R.B. Tait

Metal additive manufacturing in aerospace: A review

Thick-film sensors: past, present and future

Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications

Mechanisms of cement hydration

Recent developments in stainless steels

Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement

Effect of particle size on the fracture toughness of epoxy resin filled with spherical silica

Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen

An assessment of microstructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints

Energy harvesting vibration sources for microsystems applications

Rock-Salt Growth-Induced (003) Cracking in a Layered Positive Electrode for Li-Ion Batteries

Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging

Effect of particle size on fracture toughness of epoxy resin filled with angular-shaped silica

Refinements to colloid model of C-S-H in cement: CM-II

Nanotechnology in concrete – A review

Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution

Metallic implant biomaterials

Humidity Sensors Principle, Mechanism, and Fabrication Technologies: A Comprehensive Review

Observations of microcracking in cement paste upon drying and rewetting by environmental scanning electron microscopy

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

WSXM: A software for scanning probe microscopy and a tool for nanotechnology

In vitro corrosion fatigue behavior of low nickel high nitrogen austenitic stainless steel

Characterization and Modeling of Pores and Surfaces in Cement Paste

The fatigue hardening behaviour of cement-based materials

In situ double torsion fracture studies of cement mortar and cement paste inside a scanning electron microscope

Fatigue and Fracture Toughness of Ti-6Al-4V Titanium Alloy Manufactured by Selective Laser Melting

The effect of cold work and heat treatment on the fatigue behaviour of 3CR12 corrosion resistant steel wire

Thick film heater elements and temperature sensors in modern domestic appliances

The fatigue behaviour of metastable (AISI-304) austenitic stainless steel wires

Review and evaluation of the double-torsion technique for fracture toughness and fatigue testing of brittle materials