Citation Impact
Citing Papers
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
2018 Standout
Application of the combined neuro-computing, fuzzy logic and swarm intelligence for optimization of compocast nanocomposites
2014
Development of quartz particulate reinforced AA6063 aluminum matrix composites via friction stir processing
2016
Al–Ni intermetallic composites produced in situ by friction stir processing
2010
Microstructure and surface mechanical property of AZ31 Mg/SiCp surface composite fabricated by Direct Friction Stir Processing
2014
Multi-Length Scale Characterization of Microstructure Evolution and Its Consequence on Mechanical Properties in Dissimilar Friction Stir Welding of Titanium to Aluminum
2019
Influence of friction stir processing on microstructure and properties of AA7075/TiB 2 in situ composite
2015
Efficient optimum solution for high strength Al alloys matrix composites
2013
Good bonding between coated B4C particles and aluminum matrix fabricated by semisolid techniques
2013
Reactive mechanism and mechanical properties of in-situ hybrid nano-composites fabricated from an Al–Fe2O3 system by friction stir processing
2017
In-situ aluminum matrix composite produced by friction stir processing using FE particles
2015
On the correlation between indentation hardness and tensile strength in friction stir processed materials
2020
Comparison studies on mechanical and wear behavior of fabricated aluminum surface nano composites by fusion and solid state processing
2016
Existence of Good Bonding between Coated B4C Reinforcement and Al Matrix via Semisolid Techniques: Enhancement of Wear Resistance and Mechanical Properties
2013
Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing
2016
Characterization of molybdenum particles reinforced Al6082 aluminum matrix composites with improved ductility produced using friction stir processing
2017
A review on synthesis and characterization of commercially available natural fibers: Part II
2017
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Development of stainless steel particulate reinforced AA6082 aluminum matrix composites with enhanced ductility using friction stir processing
2017
Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles
2014
Microstructure and sliding wear behavior of AA6360/(TiC+B4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate
2012
Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites
2015
Reactive friction-stir processing of nanocomposites: Effects of thermal history on microstructure–mechanical property relationships
2017
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
2017
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
2017 Standout
Aluminium based in-situ composite fabrication through friction stir processing: A review
2017
Microstructure, mechanical and electrical characterization of zirconia reinforced copper based surface composite by friction stir processing
2018
Friction-stir processing of an AA8026-TiB 2 -Al 2 O 3 hybrid nanocomposite: Microstructural developments and mechanical properties
2016
Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing
2015
3D Self‐Architectured Steam Electrode Enabled Efficient and Durable Hydrogen Production in a Proton‐Conducting Solid Oxide Electrolysis Cell at Temperatures Lower Than 600 °C
2018
Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties
2018
Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing
2018
Enhancement of mechanical and tribological properties of SiC- and CB-reinforced aluminium 7075 hybrid composites through friction stir processing
2017
Refined microstructure of compo cast nanocomposites: the performance of combined neuro-computing, fuzzy logic and particle swarm techniques
2014
Friction stir processing of an aluminum-magnesium alloy with pre-placing elemental titanium powder: In-situ formation of an Al3Ti-reinforced nanocomposite and materials characterization
2015
Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
2019
Microstructural, mechanical and tribological behavior of aluminum nitride reinforced copper surface composites fabricated through friction stir processing route
2017
Co-electrolysis of steam and CO2 in full-ceramic symmetrical SOECs: a strategy for avoiding the use of hydrogen as a safe gas
2015
Effect of Tool Shoulder Diameter on the Surface Hardness of Aluminum-Molybdenum Surface Composites Developed by Single and Double Groove Friction Stir Processing
2019
Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing
2018
Experimental investigations on the enhancement of mechanical properties of magnesium-based hybrid metal matrix composites through friction stir processing
2017
Wear properties of Al–Al2O3/TiB2 surface hybrid composite layer prepared by friction stir process
2015
Wear Characteristics of Al5083 Surface Hybrid Nano-composites by Friction Stir Processing
2016
Surface composites by friction stir processing: A review
2015
Microstructural characterization and tensile behavior of friction stir processed AA6061/Al2Cu cast aluminum matrix composites
2018
Processing, microstructural evolution and strength properties of in-situ magnesium matrix composites containing nano-sized polymer derived SiCNO particles
2017
Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB 2 hybrid aluminum composites synthesized by friction stir processing
2016
Tribological and mechanical behavior of particulate aluminum matrix composites
2014
In-situ formation of Al2O3 nanoparticles during friction stir processing of AlSiO2 composite
2013
Analysis of Microstructures and Mechanical Properties of Particle Reinforced AlSi7Mg2 Matrix Composite Materials
2010
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl 2 O 4 -SiC core-shell microcomposites
2016
Influence of hybrid ratio and friction stir processing parameters on ultimate tensile strength of 5083 aluminum matrix hybrid composites
2016
Microstructural characterization of vanadium particles reinforced AA6063 aluminum matrix composites via friction stir processing with improved tensile strength and appreciable ductility
2018
Development of Al3Ti and Al3Zr intermetallic particulate reinforced aluminum alloy AA6061 in situ composites using friction stir processing
2014
Fabrication of a high strength ultra-fine grained Al-Mg-SiC nanocomposite by multi-step friction-stir processing
2017
Fabrication of novel fiber reinforced aluminum composites by friction stir processing
2015
Hydrogen production for energy: An overview
2020 Standout
Microstructural and mechanical properties of Al-4.5wt% Cu reinforced with alumina nanoparticles by stir casting method
2013
Trends in research and development of protonic ceramic electrolysis cells
2019
Fabrication and characterization of in-situ Al/Nb metal/intermetallic surface composite by friction stir processing
2017
Multi Response Optimization for Processing Al–SiCp Composites: An Approach Towards Enhancement of Mechanical Properties
2014
Fabrication and characterization of magnesium matrix composite processed by combination of friction stir processing and high-energy ball milling
2016
Reactive friction stir processing of AA 5052–TiO2 nanocomposite: process–microstructure–mechanical characteristics
2014
Influence of friction stir processing on microstructure and tensile behavior of AA6061/Al3Zr cast aluminum matrix composites
2019
Effective joining of Mg/Ti dissimilar alloys by friction stir lap welding
2019
A Study on Micro-hardness and Tribological Behaviour of Nano-WC–Co–Cr/Multi-walled Carbon Nanotubes Reinforced AZ91D Magnesium Matrix Surface Composites
2017
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Effects of post-annealing on the microstructure and mechanical properties of friction stir processed Al–Mg–TiO2 nanocomposites
2014
Microstructure and wear characterization of aluminum matrix composites reinforced with industrial waste fly ash particulates synthesized by friction stir processing
2016
Microstructure and mechanical properties of fine-grained aluminum matrix composite reinforced with nitinol shape memory alloy particulates produced by underwater friction stir processing
2019
Reciprocating wear behavior of 7075Al/SiC in comparison with 6061Al/Al2O3 composites
2014
Suppression of Segregation, Settling and Agglomeration in Mechanically Processed Composites Fabricated by a Semisolid Agitation Processes
2012
Application of the Extrusion to Increase the Binding between the Ceramic Particles and the Metal Matrix: Enhancement of Mechanical and Tribological Properties
2013
High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History
2017
Effect of friction stir processing on microstructure and tensile behavior of AA6061/Al3Fe cast aluminum matrix composites
2019
Study of Mechanical Properties & Residual Stresses on Post Wear Samples of A356-SiC Metal Matrix Composites
2014
Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: Evaluation of microstructural, mechanical and electrical behavior
2016
Works of Ranjit Bauri being referenced
Tungsten particle reinforced Al 5083 composite with high strength and ductility
2014
Processing and properties of Al–Li–SiCp composites
2007
Optimization of process parameters for friction stir processing (FSP) of Al–TiC in situ composite
2014
Effect of equal channel angular pressing (ECAP) on microstructure and properties of Al–SiCp composites
2009
Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite
2010
Nickel particle embedded aluminium matrix composite with high ductility
2009
Effects of ball milling and particle size on microstructure and properties 5083 Al–Ni composites fabricated by friction stir processing
2015
Microstructural characterisation of friction stir processed aluminium
2011
Wear properties of 5083 Al–W surface composite fabricated by friction stir processing
2016
Friction Stir Processing of Al-TiB2 In Situ Composite: Effect on Particle Distribution, Microstructure and Properties
2015
Effect of friction stir processing on microstructure and mechanical properties of aluminium
2012
Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite
2011
Y and In-doped BaCeO3-BaZrO3 solid solutions: Chemically stable and easily sinterable proton conducting oxides
2016
Processing and compressive strength of Al–Li–SiCp composites fabricated by a compound billet technique
2008
Development of Cu particles and Cu core-shell particles reinforced Al composite
2014
Sliding wear behavior of Al–Li–SiCp composites
2008
Phase formation and ionic conductivity studies on ytterbia co-doped scandia stabilized zirconia (0.9ZrO2–0.09Sc2O3–0.01Yb2O3) electrolyte for SOFCs
2011
Effect Of Nanoclay On The Toughness Of Epoxy And Mechanical, Impact Properties Of E-glass-epoxy Composites
2015
Al-Ti Particulate Composite: Processing and Studies on Particle Twinning, Microstructure, and Thermal Stability
2016