Citation Impact
Citing Papers
Mechanically driven disorder and phase transformations in alloys
1995
Graphene-based composites
2011 Standout
Atomic packing and short-to-medium-range order in metallic glasses
2006 StandoutNature
Nanomoulding with amorphous metals
2009 StandoutNature
Theoretical Chemistry of Gold
2004 Standout
Li-alloy based anode materials for Li secondary batteries
2010 Standout
Softening Caused by Profuse Shear Banding in a Bulk Metallic Glass
2006 Standout
Semiconducting and Metallic Polymers: The Fourth Generation of Polymeric Materials (Nobel Lecture)
2001 StandoutNobel
Poisson's ratio and modern materials
2011 Standout
Processing of Bulk Metallic Glass
2009 Standout
Plasmonics for extreme light concentration and manipulation
2010 Standout
Designing metallic glass matrix composites with high toughness and tensile ductility
2008 StandoutNature
Mechanically driven alloying of immiscible elements
1992
Solid-state amorphization of CoV crystalline intermetallic compound by mechanical milling
1994
Study of the formation of the amorphous phase in metallic systems by mechanical alloying
1988
Preparation of amorphous TiSi alloys by mechanical alloying
1991
Formation of coordination polymer glass by mechanical milling: dependence on metal ions and molecular doping for H+ conductivity
2018 StandoutNobel
DLC film deposition by Laser-Arc and study of properties
1994
Formation and properties of NdFeB prepared by mechanical alloying and solid-state reaction
1987
Phase formation in mechanically alloyed Nb-Al powders
1988
Mechanical alloying of the Fe−Zr system. Correlation between input energy and end products
1991
Raman spectroscopy on amorphous carbon films
1996 Standout
Microstructure evolution of mechanical alloyed Ni—24 at% Si
1998
Formation of powdered HfNi, HfCu and HfRu materials by mechanical alloying methods
1988
X-Ray absorption spectroscopy and diffraction study of miscible and immiscible binary metallic systems prepared by ball milling
1993
On the synthesis of the Mg2Ni alloy by mechanical alloying
1995
Nanophase ZrAl solid solutions by mechanical alloying at elevated temperatures
1993
Hard magnetic properties of NdFeB formed by mechanical alloying and solid state reaction
1988
Wear resistance of amorphous alloys and related materials
2002
X-ray diffraction study of mechanically alloyed amorphous-crystalline titanium silicides
1994
Amorphization of AlCuFe quasicrystalline alloys by mechanical milling
1996
Solid state nitrization reaction of amorphous tantalum aluminium nitride alloy powders: the role of amorphization by reactive ball milling
1994
Synthesis of amorphous phase in TiNiCu system by mechanical alloying
1990
Amorphization reaction during mechanical alloying: Influence of the milling atmospheres
1991
Novel materials synthesis by mechanical alloying/milling
1998
Nonequilibrium phase transformation and magnetic properties of Ni3Sn2 during mechanical milling
1993
Physical metallurgy of Ti–Ni-based shape memory alloys
2005 Standout
Formation of supersaturated solid solutions by mechanical alloying
1996
Mechanical alloying and characterization of Ni50Al25Ti25
1996
Temperature rise during mechanical alloying
1992
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Glass-forming range of transition metal-transition metal alloys prepared by mechanical alloying
1988
Angle-resolved photoemission studies of the cuprate superconductors
2003 Standout
Glass-forming range in mechanically alloyed Ni-Zr and the influence of the milling intensity
1988
Structural evolution in niobium beryllides during mechanical alloying
1992
Structural changes induced by the mechanical alloying of crystalline metal powders
1991
Room-temperature mechanically induced solid-state devitrifications of glassy Zr65Al7.5Ni10Cu12.5Pd5 alloy powders
2003
Amorphization process by rod-milling TixAl100 − x and the effect of annealing
1996
Interdiffusion during the formation of amorphous alloys by mechanical alloying
1989
Formation of thermodynamically unstable solid solutions in the Cu-Co system by mechanical alloying
1993
Competition between stable and metastable phases during mechanical alloying and ball milling
1992
Metastable phase formation in the Zr-Al binary system induced by mechanical alloying
1990
Formation of amorphous Al-Cr alloys by mechanical alloying of elemental aluminium and chromium powders
1990
Solid state amorphization in binary TiNi, TiCu and ternary TiNiCu system by mechanical alloying
1992
Diamond-like amorphous carbon
2002 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Formation of Amorphous Ti-Pd Alloys by Mechanical Alloying Methods
1987
Ball-milling-induced amorphization inNi x Zr y
1993
Preparation of amorphous Ti1−xCux (0.10<x≤0.87) by mechanical alloying
1986
Mechanically driven phase transformation from crystal to glass in Ti-Al binary system
1995
Synthesis of Amorphous Powders of Ni-Si and Co-Si Alloys by Mechanical Alloying
1991
Mechanically alloyed Sm-Co materials
1991
Amorphization by ball milling. A review
1988
Supersaturated Al(Ti) solid solutions with partial L12 ordering prepared by mechanical alloying
1995
Preparation of a metastable high temperature phase (γ-Dy2S3) and a metastable high pressure phase (γ-Y2S3) by mechanical alloying and mechanical milling
1991
Interparticle Coupling Effect on the Surface Plasmon Resonance of Gold Nanoparticles: From Theory to Applications
2007 Standout
1991 Standout
Glass Formation of a Coordination Polymer Crystal for Enhanced Proton Conductivity and Material Flexibility
2016 StandoutNobel
Glass formation in mechanically alloyed transition-metal-Zr alloys
1987
Atomic disorder and phase transformation in L12-structure Ni3Si by ball milling
1994
Structural investigation of the amorphization reaction by mechanical alloying of the Mo50Ni50 system
1989
High-temperature phase transformations of iron anhydrous ammonia system realized by ball milling at room temperature
1996
Phase transformations in the NbAu system by ball milling and the study of the metastable phases
1993
Metal hydride materials for solid hydrogen storage: A review☆
2007 Standout
Solid-state amorphization and contamination of NiTa powders during ball-milling
1991
Mechanical alloying of nb-al powders
1996
The formation of metastable Ti–Al solid solutions by mechanical alloying and ball milling
1993
A mathematical and experimental dynamical phase diagram for ball-milled Ni10Zr7
1994
Analysis of X-ray diffraction patterns from mechanically alloyed Al-Ti powders
1996
Atmosphere effects of the amorphization reaction in NiZr by ball milling
1993
De-mixing of Nd2Fe14B during mechanical milling
1992
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
The synthesis of nanocrystalline nickel boride powders by ball milling of elemental components
1995
Amorphization process induced by mechanical alloying in the immiscible Cu-Ta system
1993
Formation and stability of amorphous Zn-Ti alloy by mechanical alloying
1994
Estimation of peak temperature reached by particles trapped among colliding balls in the ball-milling process using excessive oxidation of antimony
1991
Grinding media wear during mechanical alloying of Ni-W alloys in a SPEX mill
1992
Structural changes during high-energy ball milling of iron-based amorphous alloys: Is high-energy ball milling equivalent to a thermal process?
1990
Nanocrystalline materials
1989 Standout
Atomic disorder and phase transformation in intermetallic compounds of the typeT 3 X 2
1994
Modeling of Particle Size Evolution during Mechanical Milling
1993
Structure and properties of Cu2MnAl synthesized by mechanical alloying
1995
Formation of amorphous Ni-Zr alloys by mechanical alloying of mixtures of the intermetallic compounds Ni11Zr9 and NiZr2
1987
Glass forming ability in mechanically alloyed Fe-Zr
1986
Formation of amorphous Ni-Zr alloy powder by mechanical alloying of intermetallic powder mixtures and mixtures of nickel or zirconium with intermetallics
1988
Limits for Metallic Conductivity in Conducting Polymers
1997 StandoutNobel
The Preparation of Amorphous Ni-Zr Powder by Grinding the Crystalline Alloy
1986
The influence of mill energy and temperature on the structure of the TiNi intermetallic after mechanical attrition
1993
Mechanical alloying and milling
2001 Standout
Photophysical, Photochemical and Photocatalytic Aspects of Metal Nanoparticles
2002 Standout
A comparative analysis of a-C:H by infrared spectroscopy and mass selected thermal effusion
1998
Far from equilibrium phase transition induced by solid-state reaction in the FeSi system
1993
Structural and calorimetric studies of amorphous Cu71Ni11P18 alloy produced by ball-milling
1993
Formation of Glasses from Liquids and Biopolymers
1995 StandoutScience
Displacement reactions during mechanical alloying
1990
Mechanical alloying of brittle materials
1988
Alloys for hydrogen storage in nickel/hydrogen and nickel/metal hydride batteries
1994
Effect of Ambient Temperature on the MA and MG Processes in Ni–Zr Alloy System
1990
Mechanical alloying behavior in group V transition metal/silicon systems
1988
A study of the glass-forming range in the ternary TiNiAl system by mechanical alloying
1994
BALL MILLING OF SYSTEMS WITH POSITIVE HEAT OF MIXING: EFFECT OF TEMPERATURE IN Ag-Cu
1997
Evidence for self-sustained MoSi2 formation during room-temperature high-energy ball milling of elemental powders
1993
Mechanism of solid-gas reaction for formation of metastable niobium-nitride alloy powders by reactive ball milling
1994
Amorphization by mechanical alloying
1990
Morphological and calorimetric studies on the Amorphization Process of Rod-Milled Al50Zr50 Alloy Powders
1992
On the elastic mismatch in the order-disorder transformation and solid state amorphization of intermetallic compounds—II. Criteria for the solid-amorphous transformation in intermetallic compounds
1991
Synthesis of nanocrystalline titanium carbide alloy powders by mechanical solid state reaction
1996
Nanocrystalline powder formation during mechanical alloying of W and Si
1993
Disordering of the Ni3Si intermetallic compound by mechanical milling
1993
Formation and properties of mechanically alloyed amorphous FeZr
1988
The structure of amorphous binary metal-metal alloys prepared by mechanical alloying
1993
Thermodynamic Properties of Amorphous Solids —Glass Formation and Glass Transition— (<I>Overview</I>)
1995
Medium-range structure variations in the solid state amorphizing transformation of metallic alloys by mechanical milling
1993
Amorphization by mechanical attrition in the NbGe system: Extension of the amorphous composition range
1993
Determination of the thermodynamic functions and calculation of phase diagrams for metastable phases
1992
Nitrogen modification of hydrogenated amorphous carbon films
1997
Amorphization of FeNb by mechanical alloying
1996
Superconducting Transition Temperature of Mechanically Alloyed Amorphous NiZr
1987
Pathophysiology of Sleep Apnea
2010 Standout
Phase transformation of the compound V3Ga induced by mechanical grinding
1991
Amorphization of Ti1−xMnx Binary Alloys by Mechanical Alloying
1992
Calorimetry study of Ni50Ti50 ball milled powders
1992
Bulk nanostructured materials from severe plastic deformation
2000 Standout
The enhancement of solid solubility limits of AlCo intermetallic compound by high-energy ball milling
1992
Boron-doped diamond-like amorphous carbon as photovoltaic films in solar cell
2001
Lattice destabilization and amorphization by mechanical alloying in the TiAl system
1993
Metastable phases formation induced by mechanical alloying
1995
Formation of amorphous Ge-S semiconductor alloys by mechanical alloying
1993
Near-neighbor mixing and bond dilation in mechanically alloyed Cu-Fe
1996
Microstructure investigations on explosive TiNi(or Ni)/TiC-composite-formation reaction during mechanical alloying
1996
The structure of equiatomic NiTi, CuTi, NiZr and CuZr prepared by mechanical alloying
1991
The formation and thermal stability of amorphous Ni-Nb alloy powder synthesized by mechanical alloying
1987
Mechanical alloying of Al—Ti powder mixtures and their subsequent consolidation
1993
Formation and crystallization of amorphous NiTi powders prepared by mechanical alloying
1988
Metallic Glasses
1995 StandoutScience
The role of the martensite transformation for the mechanical amorphisation of NiTi
1997
In situthermal observation of explosive compound-formation reaction during mechanical alloying
1990
Development of an extremely high energy ball mill for solid state amorphizing transformations
1988
Supercooled liquids and the glass transition
2001 StandoutNature
Amorphization in the Nb-Si system by mechanical alloying
1993
Photoinduced electron transfer reactions in mixed films of π-conjugated polymers and a homologous series of tetracyano-p-quinodimethane derivatives
1995 StandoutNobel
Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon
2001 Standout
Nitrogenated amorphous carbon as a semiconductor
1996
Introduction to the viewpoint set on: Mechanical alloying
1996
Microstructural evolution in mechanically alloyed Nb-25 at.% Ge
1987
X-ray diffraction study of the amorphization process by mechanical alloying of the NiTi system
1988
Formation of amorphous NiZr powders by mechanical alloying
1988
Microstructures and properties of high-entropy alloys
2013 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Structural evolution in mechanically alloyed Al-Fe powders
1995
Photoinduced electron transfer from π-conjugated polymers onto Buckminsterfullerene, fulleroids, and methanofullerenes
1995 StandoutNobel
The relationship between liquid, supercooled and glassy water
1998 StandoutNature
Atomic disorder in Nb3Sn during heavy mechanical impact
1991
Synthesis and process characterization of mechanically alloyed amorphous Ni-Nb powders
1988
Thermodynamic and kinetic aspects of the crystal to glass transformation in metallic materials
1986 Standout
Effect of premilling elemental powders on solid solubility extension of magnesium in titanium by mechanical alloying
1995
Mechanical behavior of amorphous alloys
2007 Standout
Calorimetric evidence for polymorphous constraints on metastable Zr-Al phase formation by mechanical alloying
1991
Interpretation of Raman spectra of disordered and amorphous carbon
2000 Standout
Thermal properties of mechanically alloyed Ni50Ti50 powders
1988
Glass-forming ranges in transition metal-Zr alloys prepared by mechanical alloying
1988
Optical properties of gold clusters in the size range 2–4 nm
1998
Tin-Iron Based Nano-Materials as Anodes for Li-Ion Batteries
2011 StandoutNobel
Synthesis and characterization of mechanically alloyed Ni-Sn powders
1988
Thermally assisted and mechanically driven solid-state reactions for formation of amorphous AI33Ta67 alloy powders
1996
Mechanical Alloying of Metal–Organic Frameworks
2017 StandoutNobel
Amorphous Al-Cr alloys by mechanical grinding of rapidly solidified crystalline powders
1990
Amorphization in mechanically alloyed (Ti, Zr, Nb)–(Cu, Ni)–Al equiatomic alloys
2006
On the formation of μ and ζ phases in the AgAl system by mechanical alloying
1994
Glass formation in mechanically alloyed transition metal - titanium alloys
1987
Solid-state reaction induced by milling of a mixture of cobalt and boron powders
1991
Exchange bias in nanostructures
2005 Standout
Crystalline-to-amorphous phase transformation in mechanically alloyed Fe50W50 powders
1997
Mechanical attrition and magnetic properties of CsCl-structure Co-Ga
1991
Enhancement of the photovoltaic conversion efficiency of copper phthalocyanine thin film devices by incorporation of metal clusters
1995
Formation of AlPd and Al3Pd5 intermetallic phases by mechanical alloying of elemental powders
1989
Structural and thermodynamic properties of heavily mechanically deformed Ru and AlRu
1989
Magnetic Properties of Nanostructured Materials
1996 Standout
Atomic disorder induced by mechanical milling in the intermetallic compound CoAl
1992
Structural development during mechanical alloying of crystalline niobium and tin powders
1987
Formation of amorphous metals by mechanical alloying
1988
Epitaxial growth and magnetic properties of Fe(111) films on Si(111) substrate using a GaSe(001) template
2001 StandoutNobel
Glass formation and extended solubilities in mechanically alloyed cobalt-transition metal alloys
1990
Direct observation of the intersystem crossing in poly(3-octylthiophene)
1995 StandoutNobel
Magnetic properties of mechanically alloyed Fe3Sn
1994
Recent advances in the synthesis of alloy phases by mechanical alloying/milling
1996
Formation of amorphous Ni-Ta alloy powders by mechanical alloying
1994
Characteristics of the mechanically-alloyed Ni60Ti40 amorphous powders during mechanical milling in different atmospheres
1993
Mössbauer effect on mechanically alloyed Fe-Zr glasses
1987
Milling and mechanical alloying of inorganic nonmetallics
1992
Amorphization and disordering of the Ni3Al ordered intermetallic by mechanical milling
1990
Formation of amorphous alloys by the mechanical alloying of crystalline powders of pure metals and powders of intermetallics
1986
Structure and properties of amorphous and nanocrystalline NiTi prepared by severe plastic deformation and annealing
2002
Initial solid-state reactions between crystalline Sb and amorphous Si thin films
1988
A study of solid-state amorphization in Zr–30 at. % Al by mechanical attrition
1996
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
1997 StandoutScience
Works of Ralf Petrich being referenced
<title>MIR/NIR/VIS spectrophotometric investigation of absorbing thin-film materials based on error function minimization by the method of conjugated gradients</title>
1994
Calorimetry study of the synthesis of amorphous Ni-Ti alloys by mechanical alloying
1988
The position of the fundamental absorption edge and activation energies for thermally activated electrical conductivity in amorphous carbon layers
1993
The optical constants of the so-called “diamond-like” carbon layers and their description in terms of semiempirical dispersion models
1993
Flexible construction of error functions and their minimization: application to the calculation of optical constants of absorbing or scattering thin-film materials from spectrophotometric data
1995
The effect of nitrogenation on the electrical properties of amorphous hydrogenated carbon layers
1993
The synthesis of amorphous NiTi alloy powders by mechanical alloying
1985
Optical and electrical properties of amorphous hydrogenated carbon layers deposited by dc plasma decomposition
1992