Citation Impact

Citing Papers

Consolidation of Fe-Co-Nd-Dy-B Glassy Powders by Spark-Plasma Sintering and Magnetic Properties of the Consolidated Alloys
2003
Differences of crystal structure and dynamics between a soft porous nanocrystal and a bulk crystal
2011 StandoutNobel
Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient
2010 Standout
Processing of Bulk Metallic Glass
2009 Standout
Exchange-coupled nanocomposite magnets by nanoparticle self-assembly
2002 StandoutNature
Mechanical alloying of Fe-Al intermetallics in the DO3 composition range
1994
Recent developments in stainless steels
2009 Standout
A Highly Reversible Nano‐Si Anode Enabled by Mechanical Confinement in an Electrochemically Activated LixTi4Ni4Si7 Matrix
2012
Effect of Al and C on structure and mechanical properties of Fe–Al–C alloys
2007
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
2006 Standout
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Application of cast Al–Si alloys in internal combustion engine components
2014 Standout
Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying
2002 Standout
Crystallization of Amorphous Alloys
1996
Magnetothermal behavior of a nanoscale Fe/Fe oxide granular system
2002
R2Fe14B materials: Intrinsic properties and technological aspects
1991 Standout
Structure evolution and changes in magnetic properties of severe plastic deformed Nd(Pr)–Fe–B alloys during annealing
1998
High-temperature structural intermetallics
2000 Standout
Microwave Dielectric Ceramics for Resonators and Filters in Mobile Phone Networks
2006 Standout
Advances in the Development of Novel Cobalt Fischer−Tropsch Catalysts for Synthesis of Long-Chain Hydrocarbons and Clean Fuels
2007 Standout
The magnetic properties of Nd-Fe-B magnets produced by liquid dynamic compaction
1990
Nanomagnetics
2003
Granular CoPt/C films for high-density recording media
2000
Two- and three-dimensional calculation of remanence enhancement of rare-earth based composite magnets (invited)
1994
Mechanical alloying and milling
2001 Standout
Low-density low-carbon Fe–Al ferritic steels
2012
Current state of Fe-Mn-Al-C low density steels
2017 Standout
The microstructure of aluminized type 310 stainless steel
2006
Low-Density Steels
2014
Nutrient content of tropical edible seaweeds, Eucheuma cottonii, Caulerpa lentillifera and Sargassum polycystum
2008 Standout
Controlling the properties of high energy density permanent magnetic materials by different processing routes
2000
Nanostructured materials: basic concepts and microstructure
2000 Standout
Mechanically alloyed nanocomposite magnets (invited)
1998
Silver Nanoparticles: Synthesis, Characterization, Properties, Applications, and Therapeutic Approaches
2016 Standout
Glass-forming ability and fragility parameter of amorphous Fe67Co9.5Nd3Dy0.5B20
2006
Structural order in Ba(Zn1/3Ta2/3)O3, Ba(Zn1/3Nb2/3)O3 and Ba(Mg1/3Ta2/3)O3 microwave dielectric ceramics
1997
Fabrication of bulk nanocomposite magnets via severe plastic deformation and warm compaction
2010
Structures and magnetic properties of a Nd15Fe77B8 alloy produced by twin-roller quenching
1990
Mechanical Alloying of Iron–Aluminium Intermetallics
1993
Overview of Lightweight Ferrous Materials: Strategies and Promises
2014
Mechanical alloying of iron–hematite powders
1998
Amorphization and devitrification reactions in metallic glass alloys
2006
Magnetic properties and spin disorder in nanocrystalline materials
1999
Alloy Negative Electrodes for Li-Ion Batteries
2014 Standout
A sensitive kinetic assay for the determination of iodine in foodstuffs
1992
Vibrational thermodynamics of materials
2009
Effect of magnetic interactions on the magnetic properties of ball-milled SmCo5+NiO powders
2002
Synthesis of Highly Crystalline and Monodisperse Maghemite Nanocrystallites without a Size-Selection Process
2001 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Improving the energy product of hard magnetic materials
2002
CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption
2015 Standout
Size dependence of nanostructures: Impact of bond order deficiency
2006
Diffusion of Tc-99m in Neutron Irradiated Molybdenum Trioxide and Its Application to Separation
1971 StandoutNobel
Mechanical behavior of amorphous alloys
2007 Standout
The influence of Cr alloying on microstructures of Fe–Al–Mn–Cr alloys
2004
Criteria for developing castable, creep-resistant aluminum-based alloys – A review
2006
Recent Advances in Polymer and Polymer Composites for Electromagnetic Interference Shielding: Review and Future Prospects
2019 Standout
High K/sub u/ materials approach to 100 Gbits/in/sup 2/
2000 Standout
Grain growth and chemical ordering in (Fe,Mn)3Si
1995
Nanocrystalline composites with high strength obtained in Zr–Ti–Ni–Cu–Al bulk amorphous alloys
1999
Exchange bias in nanostructures
2005 Standout
In-situ fabrication of Al3V/Al2O3 nanocomposite through mechanochemical synthesis and evaluation of its mechanism
2012
Mechanical properties of FeAl
1997
Magnetic Properties of Nanostructured Materials
1996 Standout
Nanophase hard magnets
1999

Works of R.A. Buckley being referenced

New nanocrystalline high-remanence Nd-Fe-B alloys by rapid solidification
1993
Remanence enhancement in nanostructured melt spun Sm(Fe/sub 0.209/Cu/sub 0.061/Zr/sub 0.025/Co/sub 0.704/)/sub 7.61/
1994
Enhanced magnetic properties in rapidly solidified Nd-Fe-B based alloys
1991
Microstructure analysis of nanocrystalline Fe-Nd-B ribbons with enhanced hard magnetic properties
1993
Microstructure and Kinetics of the Ordering Transformation in Iron–Cobalt Alloys, FeCo, FeCo–0.4%Cr, FeCo–2.5%V
1975
Some aspects of rapid solidification processing of Fe-Al-X alloys
1998
Recovery of iodine as iodine-125 from biological materials prior to assay
1979
Glass forming ability and kinetics of crystallisation of rapidly quenched Nd-Fe-B alloys
1989
DO22 to L12 transition in intermetallic systems
1992
The Disorder → Order Transformation in Iron–Cobalt-Based Alloys
1973
Structure, properties and response to heat treatment of melt-spun Al-Y and Al-La alloys
1994
Ordering transformations in Fe-50Co based alloys
1981
Effect of composition and heat treatment on the fracture of melt-spun Fe-Al-Cr intermetallic alloys
1992
Effect of grain size and microstructure on magnetic properties of rapidly solidified Fe82.4Nd13.1B4.5 alloy
1991
A Determination of the Melting Point of Element 43 (Technetium)
1960 Nature
Effect of molybdenum substitution on B2 antiphase domain formation in rapidly solidified FeAlMo alloys
1991
Crystallite size determinations for melt-spun FeNdB permanent magnet alloys
1988
Nanocrystalline structures and the enhancement of remanence and energy product in melt spun iron-rare earth-boron alloys for permanent magnets
1993
Magnetic-field-induced alignment in melt-spun Pr2Co14B
1990
Magnetic properties and microstructural characterisation of isotropic nanocrystalline Fe-Nd-B based alloys
1993
Structure and Properties of Ordered Intermetallics Based on the Fe-Al System.
1991
Rankless by CCL
2026