Citation Impact
Citing Papers
Bone healing and soft tissue contour changes following single-tooth extraction: A clinical and radiographic 12-month prospective study
2004 Standout
The effect of variation in occlusal loading on the development of abfraction lesions: a finite element study
2002
Marginal adaptation of a low-shrinkage silorane-based composite: 1-year randomized clinical trial
2010
Dental materials: 1996 literature review. Part 2
1998
Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins
2002 Standout
Rheological properties of resin composites according to variations in monomer and filler composition
2005
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity
2005 Standout
True linear polymerization shrinkage of unfilled resins and composites determined with a linometer
1993
A 3D analysis of mechanically stressed dentin–adhesive–composite interfaces using X-ray micro-CT
2004
Current ceramic materials and systems with clinical recommendations: A systematic review
2007 Standout
Rheologic properties of flowable, conventional hybrid, and condensable composite resins
2003
The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic
1999 Standout
Shear bond strength of resin cements to human dentin
2008
Effect of delivering light in specific narrow bandwidths from 394 to 515 nm on the micro-hardness of resin composites
2009
Polymerization shrinkage of composite resins: Comparison with tooth deformation
1994
A material model for internal stress of dental composites caused by the curing process
2008
Effect of adhesive layer properties on stress distribution in composite restorations—a 3D finite element analysis
2002
Resin-ceramic bonding: A review of the literature
2003 Standout
Curing efficiency of four self-etching, self-adhesive resin cements
2009
Pharmacological treatment of social anxiety disorder: A meta-analysis
2003
A New Method for Assessment of Marginal Sealability of Dental Restorations
1992
Resin composite—State of the art
2010 Standout
Influence of humidity on dimensional stability of a range of ion-leachable cements
1995
Ceramics in dentistry: Historical roots and current perspectives
1996 Standout
Effects of resin composite composition and irradiation distance on the performance of curing lights
2004
Synthesis and polymerization of new expanding dental monomers
1992
Hygroscopic and hydrolytic effects in dental polymer networks
2005 Standout
Sensitivity of catalyst/base ratio on curing of resin luting agents: Polymerization exotherm analysis
1994
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Curing-light attenuation in filled-resin restorative materials
2005
In vitro fatigue behavior of restorative composites and glass ionomers
1995
Cytotoxicity of 35 dental resin composite monomers/additives in permanent 3T3 and three human primary fibroblast cultures
1998 Standout
The influence of system compliance and sample geometry on composite polymerization shrinkage stress
2002
Early strength of glass ionomer cements
1993
Water sorption and mechanical behaviour of cosmetic direct restorative materials in artificial saliva
2001
A review of the strength properties of dental ceramics
1992
Light intensity effects on resin-composite degree of conversion and shrinkage strain
2000 Standout
Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development
1991
Microleakage of Dentin Adhesive Systems
1991
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Siloranes in dental composites
2004 Standout
Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns
2002
A micromechanics model of the elastic properties of human dentine
1999
Polymerization shrinkage and contraction stress of dental resin composites
2005 Standout
Photoelastic analysis of polymerization contraction stresses in resin composite restorations
1998
Polymerization shrinkage kinetics of dimethacrylate resin-cements
2009
Slumping during sculpturing of composite materials
2008
Fluoride release from glass ionomer restorative materials and the effects of surface coating
2001
The stress reducing capacity of unfilled resin in a Class V cavity
1999
Effect of light power density variations on bulk curing properties of dental composites
2003
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Properties of dual‐curable luting composites polymerized with single and dual curing modes
2003
Dynamic mechanical analysis of two crosslinked copolymer systems
1994
Relationship between bond-strength tests and clinical outcomes
2009 Standout
Measuring polymerization shrinkage of photo-activated restorative materials by a water-filled dilatometer
1993
In vitro Enamel and Cementum Fluoride Uptake from Three Fluoride–Containing Composites
1998
A physico-chemical explanation of the post-polymerization shrinkage in dental resins
2005
Thermal cycling procedures for laboratory testing of dental restorations
1999 Standout
Determination of polymerization shrinkage stress by means of a photoelastic investigation
2003
Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays
2002
Effect of the hydrophilic nanofiller loading on the mechanical properties and the microtensile bond strength of an ethanol‐based one‐bottle dentin adhesive
2004
Self-adhesive resin cements - chemistry, properties and clinical considerations
2010 Standout
Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation
2006 Standout
Dental luting agents: A review of the current literature
1998 Standout
Resin composites in dentistry: the monomer systems
1997 Standout
Modeling of the viscoelastic behavior of dental light-activated resin composites during curing
2003
Luting of ceramic inlays in vitro: Marginal quality of self-etch and etch-and-rinse adhesives versus self-etch cements
2007
Longevity of posterior composite restorations: Not only a matter of materials
2011 Standout
Leaking of Fillers in Dental Composites
1983
Bacterial leakage around dental restorations: its effect on the dental pulp
1982 Standout
The Relationship between Polymerization Shrinkage Measured by a Modified Dilatometer and the Inorganic Filler Content of Light-Cured Composites
1991
Minimally invasive long-term management of direct restorations: the ‘5 rs’
2015
The Impact of Composite Structure on Its Elastic Response
1986
The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins
1986
Reducing marginal leakage: a review of materials and techniques
1979
The polymerization contraction of visible-light activated composite resins
1988
A 1‐year follow‐up study on leakage of four root canal sealers at different thicknesses
1995 Standout
The effect on marginal leakage, in vitro, of curing a composite material at elevated temperatures with or without marginal etching of the cavity
1987
Clinical significance of polymerization shrinkage of composite resins
1982
Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives
1997 Standout
Creep of conventional and microfilled dental composites
1984
Managing Carious Lesions
2016 Standout
Fatigue of Restorative Materials
2001
Microleakage measurement of selected restorative materials: A new in vitro method
1986
A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results
2005 Standout
A 5-year clinical evaluation of ceramic inlays (Cerec) cemented with a dual-cured or chemically cured resin composite luting agent
1998
Mechanisms generating residual stresses and distortion during manufacture of polymer–matrix composite structures
2005 Standout
Practice Guideline for the Treatment of Patients With Obsessive-Compulsive Disorder
2008 Standout
In vivo Degradation of Resin-Dentin Bonds in Humans Over 1 to 3 Years
2000 Standout
Metallic implant biomaterials
2014 Standout
Superabsorbent hydrogels based on polysaccharides for application in agriculture as soil conditioner and nutrient carrier: A review
2015 Standout
Visco-elastic Parameters of Dental Restorative Materials during Setting
2000
Hydrolytic Degradation of Dental Composites
1984
Nanotechnology Tools for Antibacterial Materials
2013
In-situ measurement of chemical shrinkage of MY750 epoxy resin by a novel gravimetric method
2003
The Mechanical Properties of Human Dentin: a Critical Review and Re-evaluation of the Dental Literature
2003 Standout
Influence of Silane Treatment and Filler Fraction on Thermal Expansion of Composite Resins
1984
Works of P.H. Jacobsen being referenced
The effect of irradiation time on the physical properties of light-cured resins
1990
Elastic modulus of the periodontal ligament
1997
Static and dynamic moduli of composite restorative materials
1997
Fatigue and wear of dental materials
1990
The effect of curing light intensity and test temperature on the dynamic mechanical properties of two polymer composites
1999
The influence of the restoration–tooth interface in light cured composite restorations: a finite element analysis
2001
Stresses generated by luting resins during cementation of composite and ceramic inlays
1992
The elastic modulus of dentine determined by static and dynamic methods
1994
Basic techniques and materials for conservative dentistry 2. Recent advances in restorative materials
1981
Conversion of dual cure luting cements
1995
Setting Characteristics of Anterior Restorative Materials
1974
The elastic moduli of enamel and dentine
1993
Restoration of posterior teeth with composite resin. 1: Direct-placement composite.
1996
Assessment of Microleakage Using a Conductimetric Technique
1975
Working Time of Polymeric Restorative Materials
1976
The polymerization shrinkage of composite resins
1989
Finite element analysis of dental polymeric restorations
1991
The current status of composite restorative materials
1981
The Three-point Beam Test for the Evaluation of Dental Porcelain
1983
Modelling the effects of enamel anisotrophy with the finite element method
1995
Polymerization shrinkage of dental composite resins
2001
The flexural strength of repaired glass-ionomer cements
1989
Design and analysis of clinical trials
1988
Dynamic Mechanical Properties of Resin-based Filling Materials
1980
A Non-destructive Method of Evaluating the Elastic Properties of Anterior Restorative Materials
1980
Viscosity of setting anterior restorative materials
1977