Standout Papers
Citation Impact
Citing Papers
The formation of α + β microstructure in as-fabricated selective laser melting of Ti–6Al–4V
2014
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
2019
Additive manufacturing of Ni-based superalloys: The outstanding issues
2016
Detection of Process Failures in Layerwise Laser Melting with Optical Process Monitoring
2012
On the use of EBSD analysis to investigate the microstructure of gold samples built by selective laser melting
2011
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
2019
XCT analysis of the influence of melt strategies on defect population in Ti–6Al–4V components manufactured by Selective Electron Beam Melting
2015
Role of powder particle size on laser powder bed fusion processability of AlSi10mg alloy
2020
On the effect of throughout layer thickness variation on properties of additively manufactured cellular titanium structures
2017
Interface interactions between porous titanium/tantalum coatings, produced by Selective Laser Melting (SLM), on a cobalt–chromium alloy
2008
Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain
2015
Additive manufacturing: technology, applications and research needs
2013 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review
2016 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
2016
Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
2015
In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders
2016
Printability of alloys for additive manufacturing
2016
Review of bioactive glass: From Hench to hybrids
2012 Standout
3D bioactive composite scaffolds for bone tissue engineering
2017 Standout
The biocompatibility of dense and porous Nickel–Titanium produced by selective laser melting
2012
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Freeze extrusion fabrication of 13–93 bioactive glass scaffolds for bone repair
2011
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
2016
3D printing in dentistry
2015 Standout
Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound
2014
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
3D printing of high-strength aluminium alloys
2017 StandoutNature
Biomedical titanium alloys and their additive manufacturing
2016
Development and characterisation of direct laser sintering multicomponent Cu based metal powder
2006
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Decarbonising ceramic manufacturing: A techno-economic analysis of energy efficient sintering technologies in the functional materials sector
2019
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
2015
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
2015
Development of porous 316L stainless steel with controllable microcellular features using selective laser melting
2008
Blending of iron and silicon carbide powders for producing metal matrix composites by laser sintering process
2010
Failure modes in high strength and stiffness to weight scaffolds produced by Selective Laser Melting
2014
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
2008
Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
2011
Selective laser melting of heat transfer devices
2007
3D printing using concrete extrusion: A roadmap for research
2018 Standout
Cloud-Based Automated Design and Additive Manufacturing: A Usage Data-Enabled Paradigm Shift
2015
Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel
2014
Qualification of channels produced by laser powder bed fusion: Analysis of cleaning methods, flow rate and melt pool monitoring data
2018
Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior
2013
Investigation into the failure of Inconel exhaust collector produced by laser consolidation
2013
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
2013
Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior
2013
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
2010 Standout
Balling phenomena in selective laser melted tungsten
2015
Fabrication of Removable Partial Denture Framework by Selective Laser Melting
2011
Direct metal laser fabrication: machine development and experimental work
2009
Lowering thermal gradients in Selective Laser melting by pre-heating the baseplate
2013
Laser based additive manufacturing in industry and academia
2017
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
2013
Design optimization of supports for overhanging structures in aluminum and titanium alloys by selective laser melting
2014
Research on Process and Microstructure Formation of W-Ni-Fe Alloy Fabricated by Selective Laser Melting
2010
Mechanical and Microstructural Investigation of Nickel‐Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)
2015
Designing material properties locally with additive manufacturing technology SLM
2014
Additive manufacturing of lightweight, fully Al-based components using quasicrystals
2014
Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting
2010
On selective laser melting of ultra high carbon steel: Effect of scan speed and post heat treatment
2012
Application and Performance of 3D Printing in Nanobiomaterials
2013
In situ flaw detection by IR‐imaging during electron beam melting
2012
Application of laser assisted technologies for fabrication of functionally graded coatings and objects for the International Thermonuclear Experimental Reactor components
2007
A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting
2012
The role of a low-energy–density re-scan in fabricating crack-free Al85Ni5Y6Co2Fe2 bulk metallic glass composites via selective laser melting
2014
A Review of Additive Manufacturing
2012 Standout
Prioritization of Process Parameters for an Efficient Optimisation of Additive Manufacturing by Means of a Finite Element Method
2013
Study of laser‐sinterability of ferro‐based powders
2005
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
2014
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
2014
Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation
2016
Consolidation of polymer powders by selective laser sintering
2008
Single track formation in selective laser melting of metal powders
2010
Selective laser sintering/melting of nitinol–hydroxyapatite composite for medical applications
2011
Development of experimental method for in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process
2016
Material jetting additive manufacturing: An experimental study using designed metrological benchmarks
2017
An improved prediction of residual stresses and distortion in additive manufacturing
2016
Intra-layer closed-loop control of build plan during directed energy additive manufacturing of Ti–6Al–4V
2015
Comparison of density measurement techniques for additive manufactured metallic parts
2011
Comparison of Density of Stainless Steel 316L Parts Produced with Selective Laser Melting using Different Powder Grades
2009
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Effect of laser scanning speed on a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting: Microstructure, phase and mechanical properties
2016
Numerical investigation and an effective modelling on the Selective Laser Melting (SLM) process with aluminium alloy 6061
2014
Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks
2012
Novel Hybrid Printing of Porous TiC/Ti6Al4V Composites
2019
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
2013
Review of selective laser melting: Materials and applications
2015 Standout
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
2012
Study on the designing rules and processability of porous structure based on selective laser melting (SLM)
2013
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
2011
3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT
2015
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
2015
Effect of selective laser melting layout on the quality of stainless steel parts
2012
Rapid prototyping and rapid manufacturing in medicine and dentistry
2011
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
2018
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
2015 Standout
From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
2013
Thermomechanical finite element simulations of selective electron beam melting processes: performance considerations
2014
Selective Laser Melting (SLM) of pure gold
2010
Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process
2013
Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
2015
Experimental investigation into selective laser melting of austenitic and martensitic stainless steel powder mixtures
2009
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
2011
Inconel 939 processed by selective laser melting: Effect of microstructure and temperature on the mechanical properties under static and cyclic loading
2013
Designing for Additive Manufacturing
2012
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
2014
Mesoscopic simulation of selective beam melting processes
2010
Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy
2014
Mitigation of thermal distortion during additive manufacturing
2016
Selective Laser Melting of thin wall parts using pulse shaping
2009
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
RESIDUAL STRESS MEASUREMENTS AND STRUCTURAL INTEGRITY IMPLICATIONS FOR SELECTIVE LASER MELTED TI-6AL-4V
2012
Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites
2012
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
2016
Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
2014
Selective laser melting of stainless steel 316L with low porosity and high build rates
2016
Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten
2018
Sensing Defects during Directed-Energy Additive Manufacturing of Metal Parts using Optical Emissions Spectroscopy
2014
Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties
2016
Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants
2017
The present and future of additive manufacturing in the aerospace sector: A review of important aspects
2015
The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder
2013
Assessing New Support Minimizing Strategies for the Additive Manufacturing Technology SLM
2013
Evaluation of residual stress in stainless steel 316L and Ti6Al4V samples produced by selective laser melting
2015
Benchmarking of Different Powder-Bed Metal Fusion Processes for Machine Selection in Additive Manufacturing
2014
3D laser shock peening – A new method for improving fatigue properties of selective laser melted parts
2020
Abrasive wear behaviour of laser sintered iron–SiC composites
2009
Investigations on residual stresses and deformations in selective laser melting
2009
Heat transfer modelling and stability analysis of selective laser melting
2007
Microstructural Control of Additively Manufactured Metallic Materials
2016
Direct metal writing: Controlling the rheology through microstructure
2017
Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting
2016
Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder
2007
Microstructural modification of additively manufactured metals by electropulsing
2020
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
2014
Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting
2012
Enhanced manufacturing possibilities using multi-materials in laser metal deposition
2018
Additive manufacturing for steels: a review
2018
3D non-isothermal phase-field simulation of microstructure evolution during selective laser sintering
2019
Vision of 3D printing with concrete — Technical, economic and environmental potentials
2018 Standout
Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe2O3 powder mixture
2012
Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features
2006
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
2011
Additively manufactured cellular structures: Impact of microstructure and local strains on the monotonic and cyclic behavior under uniaxial and bending load
2013
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
2012
Selective Laser Melting of aluminium alloy using a uniform beam profile
2014
On direct laser deposited Hastelloy X: Dimension, surface finish, microstructure and mechanical properties
2010
Metal Additive Manufacturing: A Review
2014 Standout
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
2011
Fused deposition modeling with polypropylene
2015
Selective laser melting of an Al86Ni6Y4.5Co2La1.5 metallic glass: Processing, microstructure evolution and mechanical properties
2014
Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing
2015
Property evaluation of 304L stainless steel fabricated by selective laser melting
2012
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Microstructure of selective laser melted nickel–titanium
2014
Balling behavior of stainless steel and nickel powder during selective laser melting process
2011
Selective laser melting of Inconel 625 using pulse shaping
2010
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Combinatorial metallurgical synthesis and processing of high-entropy alloys
2018
Linking process, structure, property, and performance for metal-based additive manufacturing: computational approaches with experimental support
2016
Lasers in additive manufacturing: A review
2017
In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing
2015
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting
2019
Changing the alloy composition of Al7075 for better processability by selective laser melting
2016
Preliminary investigation on distribution of residual stress generated by the selective laser melting process
2008
A critical review of the use of 3-D printing in the construction industry
2016
Volumetric additive manufacturing via tomographic reconstruction
2019 StandoutScience
Damage evolution and failure mechanisms in additively manufactured stainless steel
2015
Microstructure and tensile properties of iron parts fabricated by selective laser melting
2013
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
2014
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
2013
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
2010
Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes
2014
A multiscale modeling approach for fast prediction of part distortion in selective laser melting
2015
Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation
2014
Research on track overlapping during Selective Laser Melting of powders
2012
Parametric analysis of the selective laser melting process
2007 Standout
Materials for additive manufacturing
2017
A review of topology optimization for additive manufacturing: Status and challenges
2020
The achievable mechanical properties of SLM produced Maraging Steel 300 components
2016
A study on the residual stress during selective laser melting (SLM) of metallic powder
2016
Combinatorial Alloy Design by Laser Additive Manufacturing
2016
Fabrication of Fe–Cr–Al Oxide Dispersion Strengthened PM2000 Alloy Using Selective Laser Melting
2009
The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
2011
Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
2011
A Functional Classification Framework for the Conceptual Design of Additive Manufacturing Technologies
2011
Critical influences of particle size and adhesion on the powder layer uniformity in metal additive manufacturing
2018
A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs
2018
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties
2013
Effect of bronze infiltration into laser sintered metallic parts
2005
Femtosecond laser additive manufacturing of iron and tungsten parts
2015
Crystal structure analysis of M2 high speed steel parts produced by selective laser melting
2013
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
A new DFM approach to combine machining and additive manufacturing
2011
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
2016 Standout
Rapid manufacturing of dental prostheses by means of selective laser sintering/melting
2005
The key metallurgical features of selective laser melting of stainless steel powder for building metallic part
2011
Monitoring and Adaptive Control of Laser Processes
2014
Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
2012
Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting
2014
Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
2014
Aqueous‐based freeze‐form extrusion fabrication of alumina components
2009
Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting
2016
Laser sintering of polyamides and other polymers
2011 Standout
Processing metallic glasses by selective laser melting
2013
Effect of total applied energy density on the densification of copper–titanium slabs produced by a DMLF process
2007
Additive manufacturing of metallic cellular materials via three-dimensional printing
2010
Mechanical properties of alloy Ti–6Al–4V and of stainless steel 316L processed by selective laser melting: influence of out-of-equilibrium microstructures
2014
Individualized production by means of high power Selective Laser Melting
2010
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Application of dimensional analysis to selective laser melting
2008
Advanced lattice support structures for metal additive manufacturing
2013
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
2011
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
2015
The effect of atmosphere on the structure and properties of a selective laser melted Al–12Si alloy
2014
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
2016
Thermography for Monitoring the Selective Laser Melting Process
2012
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
2007 Standout
Comparison of 3DSIM thermal modelling of selective laser melting using new dynamic meshing method to ANSYS
2014
Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals
2017
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
2015
Continuous liquid interface production of 3D objects
2015 StandoutScience
Metallurgy of high-silicon steel parts produced using Selective Laser Melting
2016
Fatigue of Ti6Al4V Structural Health Monitoring Systems Produced by Selective Laser Melting
2016
3D Finite Element Analysis in the selective laser melting process
2011
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
2013
Selective laser melting W–10 wt.% Cu composite powders
2009
Freeze-form extrusion fabrication of functionally graded materials
2012
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system
2014
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel
2016
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
2015
Metallurgical mechanisms in direct laser sintering of Cu–CuSn–CuP mixed powder
2006
Laser melting functionally graded composition of Waspaloy® and Zirconia powders
2007
Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
2013
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
2015
The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
2010
Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting
2015
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
2009
An integrated cost‐model for selective laser melting (SLM)
2013
A novel method for manufacturing sintered aluminium heat pipes (SAHP)
2013
AlSi12 in-situ alloy formation and residual stress reduction using anchorless selective laser melting
2015
High density selective laser melting of Waspaloy®
2007
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
2016
Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
2018
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
2015
On the Fatigue Performance of Additively Manufactured Ti-6Al-4V to Enable Rapid Qualification for Aerospace Applications
2016
Molten pool behaviour and its physical mechanism during selective laser melting of TiC/AlSi10Mg nanocomposites: simulation and experiments
2015
High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
2013
3D printing of ceramics: A review
2018 Standout
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
2014
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
2012
Energy and Resource Efficiency of SLS/SLM Processes
2011
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Synthesis and properties of topologically ordered porous magnesium
2011
A Method to Eliminate Anchors/Supports from Directly Laser Melted Metal Powder Bed Processes
2011
Residual stress via the contour method in compact tension specimens produced via selective laser melting
2014
Densification, Microstructure, and Wear Property of In Situ Titanium Nitride-Reinforced Titanium Silicide Matrix Composites Prepared by a Novel Selective Laser Melting Process
2011
Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures
2013
Selective laser melting (SLM) of gold (Au)
2012
Laser powder deposition
2009
Comparison of microstructure and mechanical properties of 316 L austenitic steel processed by selective laser melting with hot-isostatic pressed and cast material
2016
Proposal for a Standardized Test Artifact for Additive Manufacturing Machines and Processes
2012
In-situ TiC particle reinforced Ti–Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior
2009
Microstructure-controllable Laser Additive Manufacturing Process for Metal Products
2014
Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using X-ray computed tomography
2015
Fundamental consolidation mechanisms during selective beam melting of powders
2013
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
2015
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Computational modeling of residual stress formation during the electron beam melting process for Inconel 718
2015
Manufacture of Co-Cr dental crowns and bridges by selective laser Melting technology
2011
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
2021 Standout
Simulation of metallic powder bed additive manufacturing processes with the finite element method: A critical review
2015
Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting
2010
Producing Crack-Free, High Density M2 HSS Parts by Selective Laser Melting: Pre-Heating the Baseplate
2013
High-entropy alloys
2019 Standout
Texture and anisotropy in selective laser melting of NiTi alloy
2015
Additive Manufacturing of Ceramic‐Based Materials
2014
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
2017
Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling
2016
Interfacial characteristic and mechanical performance of maraging steel-copper functional bimetal produced by selective laser melting based hybrid manufacture
2018
Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
2011
3D printing of large, complex metallic glass structures
2016
Identification on Some Design Key Parameters for Additive Manufacturing: Application on Electron Beam Melting
2013
Mechanistic models for additive manufacturing of metallic components
2020
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Hybrid rapid manufacturing of metallic objects
2010
Implementation of a thermomechanical model for the simulation of selective laser melting
2014
Diode-based additive manufacturing of metals using an optically-addressable light valve
2017
New applications of rapid prototyping and rapid manufacturing (RP/RM) technologies for space instrumentation
2007
In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting
2011
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
2015
Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance
2018
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
2016
Viewpoint: metallurgical aspects of powder bed metal additive manufacturing
2015
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
A review on additive manufacturing of polymer-fiber composites
2017 Standout
The helix scan strategy applied to the selective laser melting
2012
Additive manufacturing of metals
2016 Standout
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
2016
Formation mechanisms of TiB2 tracks on Ti6Al4V alloy during selective laser melting of ceramic-metal multi-material
2020
Fatigue performance of additive manufactured metallic parts
2013
Rapid fabrication of Nb-Si based alloy by selective laser melting: Microstructure, hardness and initial oxidation behavior
2016
Microstructures and Mechanical Properties of Stainless Steel AISI 316L Processed by Selective Laser Melting
2014
Surface Morphology in Selective Laser Melting of Metal Powders
2011
A review of process development steps for new material systems in three dimensional printing (3DP)
2008
Works of Peter Mercelis being referenced
Solutions for modelling moving heat sources in a semi-infinite medium and applications to laser material processing
2007
Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting
2004
Production and properties of dense iron-based parts produced by laser melting with plasma formation
2004
Benchmarking of different SLS/SLM processes as Rapid Manufacturing techniques
2005
Residual stresses in selective laser sintering and selective laser melting
2006 Standout
ADVANCES IN SELECTIVE LASER SINTERING
2003
Binding mechanisms in selective laser sintering and selective laser melting
2005
On-line monitoring and process control in selective laser melting and laser cutting
2007
Feedback control of selective laser melting (on cd-rom)
2007
Dental prostheses by means of selective laser sintering
2004
Fundamentals of Selective Laser Melting of alloyed steel powders
2006 Standout
Selective laser melting of iron-based powder
2004
Residual stress in selective laser sintering and selective laser melting
2005
Feedback control of selective laser melting
2007