Standout Papers
Citation Impact
Citing Papers
Economic impact of integrating PCM as passive system in buildings using Fanger comfort model
2015
Climate adaptive building shells: State-of-the-art and future challenges
2013 Standout
Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings
2015
Preventing overheating in offices through thermal inertial properties of compressed earth bricks: A study on a real scale prototype
2017
Evidence of Airborne Transmission of the Severe Acute Respiratory Syndrome Virus
2004 Standout
Superspreading and the effect of individual variation on disease emergence
2005 StandoutNature
A model for the optimal design and management of a cogeneration system with energy storage
2015
Measures to improve energy demand flexibility in buildings for demand response (DR): A review
2018
Phase change materials integrated in building walls: A state of the art review
2014 Standout
Optimization of the building integrated photovoltaic system in office buildings—Focus on the orientation, inclined angle and installed area
2011 Standout
Passive thermal control in residential buildings using phase change materials
2015
Literature review on the use of phase change materials in glazing and shading solutions
2015
Recent progress on passive cooling techniques
2007
Phase change materials and energy efficiency of buildings: A review of knowledge
2019 Standout
Simulation-based decision support tool for early stages of zero-energy building design
2012
A review on simulation-based optimization methods applied to building performance analysis
2013 Standout
Smart Energy Systems for coherent 100% renewable energy and transport solutions
2015 Standout
Hydrogen energy systems: A critical review of technologies, applications, trends and challenges
2021 Standout
Passive cooling dissipation techniques for buildings and other structures: The state of the art
2012
Development and Evaluation of a Responsive Building Envelope
2011
The effects of night ventilation technique on indoor thermal environment for residential buildings in hot-humid climate of Malaysia
2009
Increasing wind power penetration into the existing Serbian energy system
2013
Optimal energy mix for transitioning from fossil fuels to renewable energy sources – The case of the Mexican electricity system
2015
Higher renewable energy integration into the existing energy system of Finland – Is there any maximum limit?
2015
Effects of PCM state on its phase change performance and the thermal performance of building walls
2014
Phase change materials and products for building applications: A state-of-the-art review and future research opportunities
2015
A review of data-driven building energy consumption prediction studies
2017 Standout
Combining multi-objective evolutionary algorithms and descriptive analytical modelling in energy scenario design
2015
The economics of wave energy: A review
2015 Standout
Phase change material (PCM) storage for free cooling of buildings—A review
2012
Recent advances in solid oxide cell technology for electrolysis
2020 StandoutScience
Advanced energy storage materials for building applications and their thermal performance characterization: A review
2016
Towards a flexible energy system – A case study for Inland Norway
2014
Methodologies and Advancements in the Calibration of Building Energy Models
2015
Integrating phase change materials in construction materials: Critical review
2019
A multi-stage optimization method for cost-optimal and nearly-zero-energy building solutions in line with the EPBD-recast 2010
2012
What does built environment research have to do with risk mitigation, resilience and disaster recovery?
2015
A review on global wind energy policy
2010 Standout
Designing net-zero energy buildings for the future climate, not for the past
2012
Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment
2017 Standout
Review on using microencapsulated phase change materials (PCM) in building applications
2015
A review of the current work potential of a trombe wall
2020 Standout
Numerical analysis on thermal performance of roof contained PCM of a single residential building
2015
A simplified framework to assess the feasibility of zero-energy at the neighbourhood/community scale
2014
4th Generation District Heating (4GDH)
2014 Standout
Short-term demand response of flexible electric heating systems: The need for integrated simulations
2013
Energy investigation of glazed windows containing Nano-PCM in different seasons
2018
Daily-seasonal operation in net-zero energy building powered by hybrid renewable energies and hydrogen storage systems
2019
Hydrogen as an energy vector
2019 Standout
Thermal energy storage materials and systems for solar energy applications
2016 Standout
The impact of thermal mass on building energy consumption
2017
Review on thermal energy storage with phase change: materials, heat transfer analysis and applications
2002 Standout
Model-based assessment of demand-response measures—A comprehensive literature review
2016
How to evaluate performance of net zero energy building – A literature research
2014
Bootstrap techniques for sensitivity analysis and model selection in building thermal performance analysis
2014
A review of sensitivity analysis methods in building energy analysis
2013
Parametric analysis of influencing factors in Phase Change Material Wallboard (PCMW)
2014
Types, methods, techniques, and applications for microencapsulated phase change materials (MPCM): A review
2015
Receptor Recognition by the Novel Coronavirus from Wuhan: an Analysis Based on Decade-Long Structural Studies of SARS Coronavirus
2020 Standout
Consumer Perceptions of Price, Quality, and Value: A Means-End Model and Synthesis of Evidence
1988 Standout
Energy hub: From a model to a concept – A review
2017 Standout
PCM incorporation in a concrete core slab as a thermal storage and supply system: Proof of concept
2015
Integration of wind and solar power in Europe: Assessment of flexibility requirements
2014
Insulation materials for the building sector: A review and comparative analysis
2016 Standout
Compliance with building energy regulations for new-build dwellings
2012
Electric vehicles and smart grid interaction: A review on vehicle to grid and renewable energy sources integration
2014 Standout
Experimental study of the influence of thermal mass on thermal comfort and cooling energy demand in residential buildings
2020 Standout
Energy planning and forecasting approaches for supporting physical improvement strategies in the building sector: A review
2016
The role of district heating in future renewable energy systems
2010 Standout
Thermal energy storage in district heating: Centralised storage vs. storage in thermal inertia of buildings
2018
Combining thermal energy storage with buildings – a review
2014
Building Automation and Control Systems and performance optimization: A framework for analysis
2016
A review on time series forecasting techniques for building energy consumption
2017 Standout
A Bioinspired, Reusable, Paper‐Based System for High‐Performance Large‐Scale Evaporation
2015 Standout
Green building research–current status and future agenda: A review
2013 Standout
Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review
2017
Developments in organic solid–liquid phase change materials and their applications in thermal energy storage
2015
Potential of structural thermal mass for demand-side management in dwellings
2013
Analysis and solution for renewable energy load matching for a single-family house
2013
Optimization of architectural design elements in tropical humid region with thermal comfort approach
2002
Empirical and computational evidence for thermal mass assessment: The example of insulating concrete formwork
2019
A state-of-the-art review on innovative glazing technologies
2014
Heat Saving Strategies in Sustainable Smart Energy Systems
2014
Heat Roadmap Europe: Identifying the balance between saving heat and supplying heat
2016
Parametric investigations of using a PCM curtain for energy efficient buildings
2015
Heat transfer—a review of 1994 literature
1997
Demand side management for a residential customer in multi-energy systems
2016
Micro-Encapsulated Phase Change Materials: A Review of Encapsulation, Safety and Thermal Characteristics
2016 Standout
Algorithms for optimization of building design: A review
2013 Standout
Thermal performance of a window shutter containing PCM: Numerical validation and experimental analysis
2016
A review on global solar energy policy
2011 Standout
Life cycle efficiency ratio: A new performance indicator for a life cycle driven approach to evaluate the potential of ventilative cooling and thermal inertia
2017
Shifting from net-zero to net-positive energy buildings
2014
Power-to-What? – Environmental assessment of energy storage systems
2015
Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey
2014
Principles and criteria for assessing urban energy resilience: A literature review
2016 Standout
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
An experimental and numerical investigation on the use of phase change materials in building elements: The case of a flat roof in Istanbul
2015
Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency
2013 Standout
Thermal conductivity of concrete – A review
2018 Standout
Energy savings by energy management systems: A review
2015 Standout
A regional optimisation of renewable energy supply from wind and photovoltaics with respect to three key energy-political objectives
2015
Mechanical and thermo-physical behaviour of concretes and mortars containing phase change material
2015
A simulation-based optimization method for cost-optimal analysis of nearly Zero Energy Buildings
2014
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
2014 Standout
Electrical energy storage systems: A comparative life cycle cost analysis
2014 Standout
Airborne transmission of respiratory viruses
2021 StandoutScience
Excess heat production of future net zero energy buildings within district heating areas in Denmark
2012
A global review of energy consumption, CO 2 emissions and policy in the residential sector (with an overview of the top ten CO 2 emitting countries)
2014 Standout
Energy Storage and Smart Energy Systems
2016
The design of Smart Energy Systems for 100% renewable energy and transport solutions
2013
Coronavirus Infections—More Than Just the Common Cold
2020 Standout
Design optimization of energy efficient residential buildings in Tunisia
2012
Full energy system transition towards 100% renewable energy in Germany in 2050
2018 Standout
Smart Energy Europe: The technical and economic impact of one potential 100% renewable energy scenario for the European Union
2016 Standout
Reviewing EnergyPLAN simulations and performance indicator applications in EnergyPLAN simulations
2015 Standout
A review of computational optimisation methods applied to sustainable building design
2013 Standout
A review on optimized control systems for building energy and comfort management of smart sustainable buildings
2014 Standout
Review of energy system flexibility measures to enable high levels of variable renewable electricity
2015 Standout
Uncertainty in the thermal conductivity of insulation materials
2010
Smart energy and smart energy systems
2017
Business optimal design of a grid-connected hybrid PV (photovoltaic)-wind energy system without energy storage for an Easter Island's block
2013
A cost optimization model for 100% renewable residential energy supply systems
2012
Optimization of window-openings design for thermal comfort in naturally ventilated buildings
2011
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
2016 Standout
Works of Per Heiselberg being referenced
Characteristics of airflow from open windows
2001
Application of sensitivity analysis in design of sustainable buildings
2009
How to define nearly net zero energy buildings nZEB - REHVA proposal for uniformed national implementation of EPBD recast
2011
Challenges in Performance Assessment of Responsive Building Elements
2008
Dynamic heat storage and cooling capacity of a concrete deck with PCM and thermally activated building system
2012
Zero Energy Building – A review of definitions and calculation methodologies
2010
On-site or off-site renewable energy supply options? Life cycle cost analysis of a Net Zero Energy Building in Denmark
2012
Energy flexibility of residential buildings using short term heat storage in the thermal mass
2016 Standout
Quantification of uncertainty in predicting building energy consumption: A stochastic approach
2012
A Literature Review of Zero Energy Buildings (ZEB) Definitions
2009
Parameter study on performance of building cooling by night-time ventilation
2008
Analysis Methods for Natural and Hybrid Ventilation - a Critical Literature Review and Recent Developments
2003
Draught risk from cold vertical surfaces
1994
A new experimental method to determine specific heat capacity of inhomogeneous concrete material with incorporated microencapsulated-PCM
2013
Influence of envelope, structural thermal mass and indoor content on the building heating energy flexibility
2018
Full-scale investigation of the dynamic heat storage of concrete decks with PCM and enhanced heat transfer surface area
2012
Climatic potential for passive cooling of buildings by night-time ventilation in Europe
2006
Experimental investigation of heat transfer during night-time ventilation
2009
Uncertainty of Energy Consumption Assessment of Domestic Buildings
2009
An experimental investigation of a solar chimney model with uniform wall heat flux
2003
A new method to determine thermophysical properties of PCM-concrete brick
2013
Life cycle cost analysis of a multi-storey residential Net Zero Energy Building in Denmark
2011
Principles of Hybrid Ventilation
2002
Ventilation of Large Spaces in Buildings: Analysis and Prediction Techniques
1998
Wind power integration using individual heat pumps – Analysis of different heat storage options
2012
Zero energy buildings and mismatch compensation factors
2011
Review of thermal energy storage technologies based on PCM application in buildings
2013
Influence of internal thermal mass on the indoor thermal dynamics and integration of phase change materials in furniture for building energy storage: A review
2016