Citation Impact
Citing Papers
Skin-inspired highly stretchable and conformable matrix networks for multifunctional sensing
2018 Standout
Additive manufacturing: technology, applications and research needs
2013 Standout
Hydrodynamics of soft active matter
2013 Standout
Finite Element Simulation of Liquid Phase Sintering with Tungsten Heavy Alloys
2006
Hyaluronic Acid Hydrogels for Biomedical Applications
2011 Standout
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
The conflicts between strength and toughness
2011 Standout
Hydrogels in Regenerative Medicine
2009 Standout
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
2010
Soft material for soft actuators
2017
Spiropyran-based dynamic materials
2013 Standout
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
2009
Recent advances in 3D printing of biomaterials
2015
Functional Differences in Engineered Myocardium from Embryonic Stem Cell-Derived versus Neonatal Cardiomyocytes
2013
Soft robotics: a bioinspired evolution in robotics
2013 Standout
Microfluidic organs-on-chips
2014 Standout
Dry double-sided tape for adhesion of wet tissues and devices
2019 StandoutNature
Engineering thick tissues - the vascularisation problem
2007
A survey on dielectric elastomer actuators for soft robots
2017
The true toughness of human cortical bone measured with realistically short cracks
2008
Advances in Dielectric Elastomers for Actuators and Artificial Muscles
2009
Design, fabrication and control of soft robots
2015 StandoutNature
Bioinspired structural materials
2014 Standout
Engineered Microenvironments for Controlled Stem Cell Differentiation
2008
Effect of delay time on part strength in selective laser sintering
2008
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
The Current State of Silicone-Based Dielectric Elastomer Transducers
2016
Laser based additive manufacturing in industry and academia
2017
Active Particles in Complex and Crowded Environments
2016 Standout
Advances in engineering hydrogels
2017 StandoutScience
Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
2009
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Selective laser sintering of HIPS and investment casting technology
2008
Review: liquid phase sintering
2008 Standout
Consolidation of polymer powders by selective laser sintering
2008
Processing techniques for functionally graded materials
2003 Standout
Effect of long-term ageing on the tensile properties of a polyamide 12 laser sintering material
2010
Strength, strain-rate sensitivity and ductility of copper with nanoscale twins
2006
Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors
2015 Standout
Regulatory Considerations in the Design and Manufacturing of Implantable 3D‐Printed Medical Devices
2015
Harnessing large deformation and instabilities of soft dielectrics: Theory, experiment, and application
2014
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour
1997
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Microstructural characterization of SLS-PA12 specimens under dynamic tension/compression excitation
2010
Selective laser sintering of polymer biocomposites based on polymethyl methacrylate
2014
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
2014
Biomaterials in cardiac tissue engineering: Ten years of research survey
2008
Topographically-Designed Triboelectric Nanogenerator via Block Copolymer Self-Assembly
2014
Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders
2009
Stimuli‐Responsive MXene‐Based Actuators
2020
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Lattice orientation effects on void growth and coalescence in fcc single crystals
2005
Microstructural characterization and mechanical properties of functionally graded PA12/HDPE parts by selective laser sintering
2011
Role of build orientation in layered manufacturing: a review
2013
Hydrogel bioelectronics
2018 Standout
Size effects on void growth in single crystals with distributed voids
2007
Electrochemical Actuators Based on Two-Dimensional Ti3C2Tx (MXene)
2019
Cylindrical void in a rigid-ideally plastic single crystal. Part I: Anisotropic slip line theory solution for face-centered cubic crystals
2004
Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres
2007
Active Brownian particles
2012
Simulation of void growth and coalescence behavior with 3D crystal plasticity theory
2007
Stretchable and Soft Electronics using Liquid Metals
2017 Standout
Additive manufacturing of cardiovascular CoCr stents by selective laser melting
2017
Hydrogel ionotronics
2018 Standout
Micromechanical modelling of stress-assisted martensitic transformation
1994
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
2013 Standout
Polar Elastomers as Novel Materials for Electromechanical Actuator Applications
2017
Investigation into the selective laser sintering of styrene–acrylonitrile copolymer and postprocessing
2010
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Core–Shell Structured High‐k Polymer Nanocomposites for Energy Storage and Dielectric Applications
2014 Standout
Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects
2016 Standout
Rapid Prototyping for Biomedical Engineering: Current Capabilities and Challenges
2012
Biodegradable metals
2014 Standout
Rotaxane-Based Molecular Muscles
2014 StandoutNobel
Measurements of the mechanical response of unidirectional 3D-printed PLA
2017
Anisotropy, homogeneity and ageing in an SLS polymer
2011
Selective laser sintering of polyamide 12/potassium titanium whisker composites
2010
TiO2nanoparticles modified polydimethylsiloxane with fast response time and increased dielectric constant
2012
Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete
2013 Standout
Laser sintering of polyamides and other polymers
2011 Standout
High Breakdown Field Dielectric Elastomer Actuators Using Encapsulated Polyaniline as High Dielectric Constant Filler
2010
Reactive Oxygen Species (ROS)-Based Nanomedicine
2019 Standout
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Fabrication and Properties of Polycaprolactone Composites Containing Calcium Phosphate-Based Ceramics and Bioactive Glasses in Bone Tissue Engineering: A Review
2017
The world of two-dimensional carbides and nitrides (MXenes)
2021 StandoutScience
Soft Robotic Grippers
2018 Standout
A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering
2008
An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)
2009
Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding
2010
Metallic implant biomaterials
2014 Standout
Modelling of metal-binder migration during liquid-phase sintering of graded cemented carbides
2004
Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering
2011
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures
2019
Layerless fabrication with continuous liquid interface production
2016
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Multiphase Polymeric Materials for Rapid Prototyping and Tooling Technologies and Their Applications
2010
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
Photothermal Nanomaterials: A Powerful Light-to-Heat Converter
2023 Standout
Ultra-compliant liquid metal electrodes with in-plane self-healing capability for dielectric elastomer actuators
2013
Optimizing press tool shapes by numerical simulation of compaction and sintering application to a hard metal cutting insert
2003
Stress Sensing in Polycaprolactone Films via an Embedded Photochromic Compound
2010
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
2015 StandoutScience
Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains
2001
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Preparation and selective laser sintering of nylon-12 coated metal powders and post processing
2009
Flexible Nanogenerators for Energy Harvesting and Self‐Powered Electronics
2016 Standout
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Additive manufacturing of metals
2016 Standout
Works of P.E. McHugh being referenced
Mathematical Models of Cell Motility
2007
Sustained release of targeted cardiac therapy with a replenishable implanted epicardial reservoir
2018
Measurement of the microstructural fracture toughness of cortical bone using indentation fracture
2007
The influence of grain size on the ductility of micro-scale stainless steel stent struts
2006
Response of mesenchymal stem cells to the biomechanical environment of the endothelium on a flexible tubular silicone substrate
2008
Comparing coronary stent material performance on a common geometric platform through simulated bench testing
2012
A corrosion model for bioabsorbable metallic stents
2011
The influence of passivation and electropolishing on the performance of medical grade stainless steels in static and fatigue loading
2005
Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone/β-tricalcium phosphate materials
2015
Finite element predictions compared to experimental results for the effective modulus of bone tissue engineering scaffolds fabricated by selective laser sintering
2009
The Stress–Strain Behavior of Coronary Stent Struts is Size Dependent
2003
Bioreactors for Cardiovascular Cell and Tissue Growth: A Review
2003
Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds
2012
Micromotion and friction evaluation of a novel surface architecture for improved primary fixation of cementless orthopaedic implants
2013
Modelling of creep in a Ni base superalloy using a single crystal plasticity model
1997
Computational modeling of metal matrix composite materials—I. Isothermal deformation patterns in ideal microstructures
1993
Micromechanical modelling of the static and cyclic loading of an Al 2124-SiC MMC
2001
A method to fabricate small features on scaffolds for tissue engineering via selective laser sintering
2010
Comparison of the implicit and explicit finite element methods using crystal plasticity
2006
Computational modeling of metal matrix composite materials—III. Comparisons with phenomenological models
1993
Engineering Assisted Surgery™: A route for digital design and manufacturing of customised maxillofacial implants
2006
Investigation of finite element mesh independence in rate dependent materials
2006
A review on dielectric elastomer actuators, technology, applications, and challenges
2008
A LIQUID PHASE SINTERING MODEL: APPLICATION TO Si3N4 AND WC-Co
1997
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
2006
Void growth simulations in single crystals
1997
Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling
2004
A combined experimental and computational study of deformation in grains of biomedical grade 316LVM stainless steel
2006