Citation Impact
Citing Papers
Ultra-high-strength polyethylene filaments by solution spinning/drawing
1980
Prepare dispersed CIS nano-scale particles and spray coating CIS absorber layers using nano-scale precursors
2014 Standout
Zirconia as a ceramic biomaterial
1999 Standout
Effects of titanium surface topography on bone integration: a systematic review
2009 Standout
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
Torque and histomorphometric evaluation of c.p. titanium screws blasted with 25- and 75-?m-sized particles of Al2O3
1996
Porous-coated titanium implant impregnated with a biodegradable protein delivery system
1997
Influence of pores created by laser superfinishing on osseointegration of titanium alloy implants
2004
Development of a new synthetic bone graft
1998
Experimental study of turned and grit-blasted screw-shaped implants with special emphasis on effects of blasting material and surface topography
1996
Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs
1991 Standout
Using Raman spectroscopy to characterize biological materials
2016 Standout
A review of catalysts for the electroreduction of carbon dioxide to produce low-carbon fuels
2013 Standout
Bone Tissue Engineering: Recent Advances and Challenges
2012 Standout
Bone formation in coralline hydroxyapatite: Effects of pore size studied in rabbits
1994
Understanding and controlling the bone–implant interface
1999 Standout
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Surface treatments of titanium dental implants for rapid osseointegration
2006 Standout
Corrosion behaviour of commercially pure titanium shot blasted with different materials and sizes of shot particles for dental implant applications
2002
Chemical and physicochemical characterization of porous hydroxyapatite ceramics made of natural bone
2000
Molybdenum, Molybdenum Oxides, and their Electrochemistry
2012
Residual stress. Part 1 – Measurement techniques
2001 Standout
Laser material processing
2011 Standout
Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications
2009 Standout
Mechanical properties of calcia stabilized zirconia following in vivo and in vitro aging
1975
Blue Light Emitting Defective Nanocrystals Composed of Earth‐Abundant Elements
2019 StandoutNobel
Crystallization of Amorphous Indomethacin during Dissolution: Effect of Processing and Annealing
2010
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Synthesis and sintering of nanocrystalline hydroxyapatite powders by citric acid sol–gel combustion method
2003
Enabling nanotechnology with self assembled block copolymer patterns
2003 Standout
Die Kristallisation von hochpolymeren Kunststoffen
1976
Materials for Oral Implantation—Biological and Functional Criteria
1973
Replamineform porous biomaterials for hard tissue implant applications
1975
Synthesis of CuInS2, CuInSe2, and Cu(InxGa1-x)Se2(CIGS) Nanocrystal “Inks” for Printable Photovoltaics
2008
Changes of microstructure and mechanical properties of cold-rolled low carbon steel due to its surface treatment by Nd:glass pulsed laser
2002
Microstructural Design of Toughened Ceramics
1991
Processing techniques for functionally graded materials
2003 Standout
Mechanical and electrical properties of polyacetylene films oriented by tensile drawing
1991 StandoutNobel
Nanocomposites: synthesis, structure, properties and new application opportunities
2009 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Synthesis of telechelic polyacrylates with unsaturated end-groups
2003 StandoutNobel
Macro-porous ceramics: processing and properties
2012 Standout
Osseointegrated Titanium Implants:Requirements for Ensuring a Long-Lasting, Direct Bone-to-Implant Anchorage in Man
1981 Standout
Drawing and extrusion of semi-crystalline polymers
1987
A Modified Layer Removal Analysis for the Determination of Internal Stresses in Polymer Composites
1997
Carrier Traps in Poly-p-Xylylene Thin Films
1981
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
2014 StandoutScience
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
The electronic avalanche in poly-p-xylylene thin polymer films. I. A numerical calculation
1988 StandoutNobel
Mechanical and electrical properties of poly-(2,5-thienylene vinylene) fibers
1990 StandoutNobel
Photoinduced absorption from triplet excitations in poly(2-methoxy, 5-(2′-ethyl-hexyloxy)-p-phenylene vinylene) oriented by gel-processing in polyethylene
1992 StandoutNobel
Overcoming Efficiency Limitations of SnS‐Based Solar Cells
2014
Grain boundaries in extended-chain polymers: Theory and experiment
1991
Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries
2015 Standout
Alternating copolymers of butadiene and propylene: Properties and characterization
1982 StandoutNobel
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
Biomaterials & scaffolds for tissue engineering
2011 Standout
Bioceramics
1998 Standout
Gradient interpenetrating polymer networks
1995
Chemical Imaging of Oral Solid Dosage Forms and Changes upon Dissolution Using Coherent Anti-Stokes Raman Scattering Microscopy
2009
Stress analysis of polycrystalline thin films and surface regions by X-ray diffraction
2005 Standout
Solubility Advantage of Amorphous Drugs and Pharmaceutical Cocrystals
2011 Standout
Synthesis of macroporous β-tricalcium phosphate with controlled porous architectural
2007
Analysis of thin film stress measurement techniques
1997
Improving the Carrier Lifetime of Tin Sulfide via Prediction and Mitigation of Harmful Point Defects
2017 StandoutNobel
Organic aerogels from the polycondensation of resorcinol with formaldehyde
1989 Standout
Minority Carrier Transport in Lead Sulfide Quantum Dot Photovoltaics
2017 StandoutNobel
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Histoire et état actuel de l'analyse des contraintes par rayons X
1996
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Fiber Bragg Grating Sensors toward Structural Health Monitoring in Composite Materials: Challenges and Solutions
2014
Bioceramics: From Concept to Clinic
1991 Standout
Effect of sputtering process parameters on film properties of molybdenum back contact
2012
Electrodeposition of CIS films on the Mo back electrodes with different crystallinities
2012
Deformation behavior of thin copper films on deformable substrates
2001
Small defects in crystalline polyethylene
1988
Percolation on a self-assembled network: Decoration of polyethylene gels with conducting polymer
1990 StandoutNobel
Control of the Preferred Orientation of Cu(In,Ga)Se2Thin Film by the Surface Modification of Mo Film
2011
Structural aspects of stretched emeraldine as determined by X-ray scattering
1991 StandoutNobel
Polymer crystals
1968
Grain size determination and limits to Hall-Petch behavior in nanocrystalline NiAl powders
1997
Historical review of porous-coated implants
1987
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
2015 Standout
Mechanical and electrical properties of highly oriented polyacetylene films
1991 StandoutNobel
Nanometre diameter fibres of polymer, produced by electrospinning
1996 Standout
Interpenetrating Polymer Networks
1978
Surface integrity in material removal processes: Recent advances
2011 Standout
Lithium metal anodes for rechargeable batteries
2013 Standout
Works of Paul Predecki being referenced
Diffraction Peak Broadening Studies in Al 2 O 3 (Whisker) Composites
1991
Use of Glancing Angle X-Ray Powder Diffractometry to Depth-Profile Phase Transformations During Dissolution of Indomethacin and Theophylline Tablets
2004
Attack of silicone rubber by tri‐alkyl phosphates
1973
A method for hydron impregnation of silicone rubber
1974
Depth Profiling Biaxial Stresses in Sputter Deposited Molybdenum Films; Use of the Cos2φ Method
1995
Residual Stress Determination in Al2O3/SiC (Whisker) Composites By X-Ray Diffraction
1987
Proposed Methods for Depth Profiling of Residual Stresses using Grazing Incidence X-Ray Diffraction (GIXD)
1992
Extrusion of high density polyethylene below its melting point
1972
Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells
1995
Stress-Depth Profiles in Magnetron Sputtered Mo Films Using Grazing Incidence X-Ray Diffraction (GIXD)
1993
Dislocations Caused by Chain Ends in Crystalline Polymers
1966
Kinetics of bone growth into cylindrical channels in aluminum oxide and titanium
1972
Determination of Interlaminar Residual Thermal Stresses in a Woven 8HS Graphite/PMR-15 Composite Using X-Ray Diffraction Measurements
2002
Skeletal extension of limb prosthetic attachments–problems in tissue reaction
1971
Stress measurement in polymeric materials by X‐ray diffraction
1976