Citation Impact
Citing Papers
Mechanical properties of graphene and graphene-based nanocomposites
2017 Standout
Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings
2015
Biocompatible reinforcement of poly(Lactic acid) with graphene nanoplatelets
2016
Film formation and deposition methods of edible coating on food products: A review
2020 Standout
Graphene Oxide, Highly Reduced Graphene Oxide, and Graphene: Versatile Building Blocks for Carbon‐Based Materials
2010 Standout
Experimental Studies and Modeling of the Drying Kinetics of Multicomponent Polymer Films
2017
A stretchable carbon nanotube strain sensor for human-motion detection
2011 Standout
Synthesis, characterization and enhanced thermoelectric performance of structurally ordered cable-like novel polyaniline–bismuth telluride nanocomposite
2013
Pursuing prosthetic electronic skin
2016 Standout
Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide
2014 Standout
A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres
2012 Standout
Design, fabrication and control of soft robots
2015 StandoutNature
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
2019 Standout
Minimizing energy consumption in refrigerated vehicles through alternative external wall
2016
Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review
2017
Research progress of phase change cold storage materials used in cold chain transportation and their different cold storage packaging structures
2020 Standout
Facile, green and affordable strategy for structuring natural graphite/polymer composite with efficient electromagnetic interference shielding
2015
Conductive polymer composites with segregated structures
2014
Microwave food processing—A review
2013 Standout
Emerging Engineered Wood for Building Applications
2022 Standout
Effect of ceramic supports on microwave processing of porous food samples
2006
Phase change materials and energy efficiency of buildings: A review of knowledge
2019 Standout
A review of energy sources and energy management system in electric vehicles
2012 Standout
High thermal conductivity epoxy composites with bimodal distribution of aluminum nitride and boron nitride fillers
2012
Highly Thermally Conductive Yet Electrically Insulating Polymer/Boron Nitride Nanosheets Nanocomposite Films for Improved Thermal Management Capability
2018 Standout
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
2010 Standout
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
2010 Standout
Theoretical analysis on microwave heating of oil–water emulsions supported on ceramic, metallic or composite plates
2008
Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications
2014 Standout
Thermal conductivity of hydrate‐bearing sediments
2009
Thermal conductivity of polymer-based composites: Fundamentals and applications
2016 Standout
Wearable Electronics and Smart Textiles: A Critical Review
2014 Standout
Review of natural gas hydrates as an energy resource: Prospects and challenges
2015 Standout
Advances in waterborne polymer/carbon material composites for electromagnetic interference shielding
2021 Standout
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
2011 Standout
A review on thermoelectric renewable energy: Principle parameters that affect their performance
2013
Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: A review
2017
PCM-mortar based construction materials for energy efficient buildings: A review on research trends
2017
Investigation of liquid sensing mechanism of poly(lactic acid)/multi-walled carbon nanotube composite films
2009
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
High conductive and mechanical robust carbon nanotubes/waterborne polyurethane composite films for efficient electromagnetic interference shielding
2019 Standout
Stretchable and Soft Electronics using Liquid Metals
2017 Standout
Hydrogel ionotronics
2018 Standout
Mathematical model for intermittent microwave convective drying of food materials
2015
Functionalized graphene sheet—Poly(vinylidene fluoride) conductive nanocomposites
2009
Valorization of lignin in polymer and composite systems for advanced engineering applications – A review
2019
A systematic literature review on machine learning applications for sustainable agriculture supply chain performance
2020 Standout
Review on using microencapsulated phase change materials (PCM) in building applications
2015
Eco-efficient construction and building materials research under the EU Framework Programme Horizon 2020
2013 Standout
Carbon nanotubes/poly(ε-caprolactone) composite vapour sensors
2009
Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring
2017 Standout
An overview of thermal energy storage systems
2017 Standout
Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human‐Activity Monitoringand Personal Healthcare
2016 Standout
Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects
2016 Standout
Novel e-nose for the discrimination of volatile organic biomarkers with an array of carbon nanotubes (CNT) conductive polymer nanocomposites (CPC) sensors
2011
Design and Development of a Flexible Strain Sensor for Textile Structures Based on a Conductive Polymer Composite
2007
Structured Reduced Graphene Oxide/Polymer Composites for Ultra‐Efficient Electromagnetic Interference Shielding
2014 Standout
Enhanced Thermal Conductivity of Polyimide Films via a Hybrid of Micro- and Nano-Sized Boron Nitride
2010
Graphene/Polymer Nanocomposites
2010 Standout
Graphene based materials: Past, present and future
2011 Standout
A refrigerated container envelope with a PCM (Phase Change Material) layer: Experimental and theoretical investigation in a representative town in Central Italy
2016
Polyimide nanocomposites with boron nitride-coated multi-walled carbon nanotubes for enhanced thermal conductivity and electrical insulation
2014
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
2016 StandoutScience
Chemical functionalization of graphene and its applications
2012 Standout
Soft Robotic Grippers
2018 Standout
Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete
2017
Graphene-based polymer nanocomposites
2010 Standout
Electrically conductive carbon nanotube/ultrahigh molecular weight polyethylene composites with segregated and double percolated structure
2012
Enhanced thermal conductivity over percolation threshold in polyimide blend films containing ZnO nano-pyramidal particles: advantage of vertical double percolation structure
2011
Role of metallic and composite (ceramic–metallic) supports on microwave heating of porous dielectrics
2007
Micro-Encapsulated Phase Change Materials: A Review of Encapsulation, Safety and Thermal Characteristics
2016 Standout
Recent advances in graphene based polymer composites
2010 Standout
Review on battery thermal management system for electric vehicles
2018 Standout
Microwave heating of saturated packed bed using a rectangular waveguide (TE10 mode): Influence of particle size, sample dimension, frequency, and placement inside the guide
2011
Remarkable selective localization of modified nanoscaled carbon black and positive temperature coefficient effect in binary-polymer matrix composites
2008
Three-dimensional simulation of microwave heating coal sample with varying parameters
2015 Standout
High performance hybrid carbon fillers/binary–polymer nanocomposites with remarkably enhanced positive temperature coefficient effect of resistance
2012
Life Cycle Assessment of Hemp Cultivation and Use of Hemp-Based Thermal Insulator Materials in Buildings
2013
High‐Thermal‐Conductivity AlN Filler for Polymer/Ceramics Composites
2008
Recent developments in phase change materials for energy storage applications: A review
2018 Standout
A review on macro-encapsulated phase change material for building envelope applications
2018 Standout
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
2016 Standout
Conductive polymer composites based on metallic nanofiller as smart materials for current limiting devices
2009
25th Anniversary Article: The Evolution of Electronic Skin (E‐Skin): A Brief History, Design Considerations, and Recent Progress
2013 Standout
Works of Patrick Glouannec being referenced
Rheological properties of conductive polymer composite (CPC) filled with double percolated network of carbon nanoparticles and boron nitride powder
2009
Conductive polymer composites with double percolated architecture of carbon nanoparticles and ceramic microparticles for high heat dissipation and sharp PTC switching
2008
Experimental survey on the combination of radiating infrared and microwave sources for the drying of porous material
2002
Numerical modeling of heat and mass transfer in porous medium during combined hot air, infrared and microwaves drying
2004
Study of the Drying Behavior of Poly(vinyl alcohol) Aqueous Solution
2005
Current passage tubes in conductive polymer composite for fluid heating
2007
Experimental and numerical study of heat transfer across insulation wall of a refrigerated integral panel van
2014
Thermoelectric behaviour of melt processed carbon nanotube/graphite/poly(lactic acid) conductive biopolymer nanocomposites (CPC)
2011
Thermal conductivity enhancement of electrically insulating syndiotactic poly(styrene) matrix for diphasic conductive polymer composites
2006
Characterization of electrical and thermal properties of extruded tapes of thermoplastic conductive polymer composites (CPC)
2003
Mechanical and thermo-physical behaviour of concretes and mortars containing phase change material
2015
Influence of the setting process and the formulation on the drying of hemp concrete
2011
Conception of thermoelectric flux meters for infrared radiation measurements in industrial furnaces
2006