Citation Impact
Citing Papers
Toward Sustainable Nanoproducts
2008
Proliferation and osteogenic differentiation of rat BMSCs on a novel Ti/SiC metal matrix nanocomposite modified by friction stir processing
2016
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment
2004 Standout
Effect of deformation route on microstructural development in aluminum processed by equal channel angular extrusion
2004
Production of Ultra-Fine Grained Aluminum Alloy using Friction Stir Process
2003
Low-Temperature Superplasticity in Aluminum Alloys Processed by Equal-Channel Angular Pressing
2002
Microstructural and Mechanical Characteristics of AZ61 Magnesium Alloy Processed by High-Pressure Torsion
2007
Achieving Superplasticity of Al-1%Mg-0.2%Sc Alloy in Plate Samples Processed by Equal-channel Angular Pressing
2004
Grain Refinement in As-Cast 7475 Aluminum Alloy under Hot Equal-Channel Angular Pressing
2003
An Evaluation of Superplastic Anisotropy after Processing by Equal-Channel Angular Pressing
2004
Microstructures and Mechanical Properties of Equal Channel Angular Pressed 5083 Al Alloy
2001
On the Hardening of Friction Stir Processed Mg-AZ31 Based Composites with 5–20% Nano-ZrO<SUB>2</SUB> and Nano-SiO<SUB>2</SUB> Particles
2006
Synthesis of metallic nanoparticles using plant extracts
2013 Standout
Nanotechnology for environmentally sustainable electromobility
2016 StandoutNobel
Microstructural evolution and mechanical properties of a friction-stir processed Ti-hydroxyapatite (HA) nanocomposite
2018
High tensile ductility in a nanostructured metal
2002 StandoutNature
Development of new metallic alloys for biomedical applications
2012 Standout
Deformation and activation volumes of cryomilled ultrafine-grained aluminum
2004
Equal-channel angular pressing of commercial aluminum alloys: Grain refinement, thermal stability and tensile properties
2000
Hydrostatic Extrusion as a Method of Grain Refinement in Metallic Materials
2006
Achieving high strain rate superplasticity in an Al–Li–Mg alloy through equal channel angular extrusion
2005
Achieving superplasticity in a Cu–40%Zn alloy through severe plastic deformation
2001
Recent developments in stainless steels
2009 Standout
Texture evolution during equal channel angular extrusion
2004
Ultrafine-grained Al–Al2Cu composite produced in situ by friction stir processing
2005
Superplastic behaviour of ultrafine-grained Ti–6A1–4V alloys
2002
Developing high-pressure torsion for use with bulk samples
2005
Microstructural development in equal-channel angular pressing using a 60° die
2004
Low temperature superplasticity in a friction-stir-processed ultrafine grained Al–Zn–Mg–Sc alloy
2005
Influence of crystal orientation on ECAP of aluminum single crystals
2006
Effects of grain size and pressing speed on the deformation mode of commercially pure Ti during equal channel angular pressing
2003
The development of superplastic ductilities and microstructural homogeneity in a magnesium ZK60 alloy processed by ECAP
2006
A finite element study of the temperature rise during equal channel angular pressing
2003
Influence of Process Parameters on the Mechanical Behavior of an Ultrafine-Grained Al Alloy
2011
Optimization of process parameters for friction stir processing (FSP) of Al–TiC in situ composite
2014
Severe plastic deformation (SPD) processes for metals
2008
Developing superplasticity in a spray-cast aluminum 7034 alloy through equal-channel angular pressing
2003
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Tensile properties of an Al–11mass%Si alloy at elevated temperatures processed by rotary-die equal-channel angular pressing
2005
Producing bulk ultrafine-grained materials by severe plastic deformation
2006
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Development of a multi-pass facility for equal-channel angular pressing to high total strains
2000
Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion: Experiments and simulations
2005
Achieving a Superplastic Forming Capability through Severe Plastic Deformation
2003
Application of cast Al–Si alloys in internal combustion engine components
2014 Standout
High strain rate superplasticity in friction stir processed Al–Mg–Zr alloy
2003
A model for the inverse Hall–Petch relation of nanocrystalline materials
2005
Orientation imaging microscopy of ultrafine-grained nickel
2002
Influence of processing temperature on the microstructures and tensile properties of 304L stainless steel by ECAP
2007
Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing
2010
Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al–Mg alloys
2002
Nanoalloys: From Theory to Applications of Alloy Clusters and Nanoparticles
2008 Standout
A novel single pass severe plastic deformation technique: Vortex extrusion
2011
Performance and applications of nanostructured materials produced by severe plastic deformation
2004
Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion
2005
Relationship between texture and low temperature superplasticity in an extruded AZ31 Mg alloy processed by ECAP
2005
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Achieving exceptional superplasticity in a bulk aluminum alloy processed by high-pressure torsion
2008
A model investigation of the shearing characteristics in equal-channel angular pressing
2003
The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP
2007
Hot deformation behavior of an aluminum-matrix hybrid nanocomposite fabricated by friction stir processing
2015
Microstructural evolutions of the Al strip prepared by cold rolling and continuous equal channel angular pressing
2002
Optimizing the procedure of equal-channel angular pressing for maximum superplasticity
2001
Mechanical properties of nanocrystalline materials
2005 Standout
Grain refinement and superplasticity in a magnesium alloy processed by equal-channel angular pressing
2005
Effect of texture evolution on tensile properties of Al–Ni eutectic alloy fabricated by equal channel angular pressing
2005
Effects of friction stir processing on mechanical properties of the cast aluminum alloys A319 and A356
2005
Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding
2002
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
Superplastic forming at high strain rates after severe plastic deformation
2000
Microstructural Evaluation of Friction Stir Processed AZ31B-H24 Magnesium Alloy
2007
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
The application of equal-channel angular pressing to an aluminum single crystal
2004
Development of ultrafine-grained microstructure and low temperature (0.48 Tm) superplasticity in friction stir processed Al–Mg–Zr
2005
Fatigue properties of 5056 Al-Mg alloy produced by equal-channel angular pressing
1999
Five-power-law creep in single phase metals and alloys
2000
Estimation of friction during equal channel angular (ECA) pressing of aluminum alloys
2002
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Al–Al3Ti nanocomposites produced in situ by friction stir processing
2006
Thermal stability of ultrafine-grained aluminum in the presence of Mg and Zr additions
1999
Scaling up of Equal Channel Angular Pressing (ECAP) for the Production of Forging Stock
2006
Nanostructured materials from severe plastic deformation
1999
Sintering dense nanocrystalline ceramics without final-stage grain growth
2000 StandoutNature
Fatigue properties of a fine-grained magnesium alloy produced by equal channel angular pressing
2004
Fatigue properties of ultrafine grained low carbon steel produced by equal channel angular pressing
2003
Influence of rolling on the superplastic behavior of an Al-Mg-Sc alloy after ECAP
2001
Properties of ultrafine-grained steel by repeated shear deformation of side extrusion process
2002
General relationship between strength and hardness
2011 Standout
Severe plastic deformation processing and high strain rate superplasticity in an aluminum matrix composite
1999
Severe plastic deformation as a processing tool for developing superplastic metals
2004
Deformation mechanisms during low-and high-temperature superplasticity in 5083 Al-Mg alloy
2002
Structural evolution of a strip-cast al alloy sheet processed by continuous equal-channel angular pressing
2002
Superplasticity in cast A356 induced via friction stir processing
2004
The role of back pressure in the processing of pure aluminum by equal-channel angular pressing
2007
Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite
2011
Continuous high strength aluminum bolt manufacturing by the spring-loaded ECAP system
2011
Mechanical properties of nanostructured chromium
1999
The Innovation Potential of Bulk Nanostructured Materials
2007
Using friction stir processing to fabricate MgAlZn intermetallic alloys
2005
Structure and mechanical and electrochemical properties of ultrafine-grained Ti
2000
High strain rate superplasticity in a friction stir processed 7075 Al alloy
1999 Standout
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Friction stir processing of squeeze cast A356 with surface compacted graphene nanoplatelets (GNPs) for the synthesis of metal matrix composites
2019
Equal-channel angular pressing using plate samples
2003
Microstructural evolution in a commercial low carbon steel by equal channel angular pressing
2000
Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles
2014
Microstructure, texture and residual stress in a friction-stir-processed AZ31B magnesium alloy
2008
Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475
2008
Modeling of continuous dynamic recrystallization in commercial-purity aluminum
2009
An investigation of microstructural evolution during equal-channel angular pressing
1997
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Enhanced superplasticity in a Ti-6Al-4V alloy processed by severe plastic deformation
2000
Low-temperature superplasticity in nanostructured nickel and metal alloys
1999 Nature
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Exceptional superplasticity in an AZ61 magnesium alloy processed by extrusion and ECAP
2006
Friction Stir Processing of Cast NiAl Bronze
2007
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review
2015 Standout
Equal-channel angular pressing of an Al-6061 metal matrix composite
2000
Reactive friction-stir processing of nanocomposites: Effects of thermal history on microstructure–mechanical property relationships
2017
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
2017
HRTEM and EELS study of aluminum nitride in nanostructured Al 5083/B4C processed via cryomilling
2009
Evaluation of Strain Rate During Equal-channel Angular Pressing
2002
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
2013
Superplasticity of Ultra-Fine Grained Al–Mg Alloy Produced by Accumulative Roll-Bonding
1999
Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing
2011
Factors influencing microstructural development in equal-channel angular pressing
2003
Aluminium based in-situ composite fabrication through friction stir processing: A review
2017
Microstructure and mechanical properties of Al–Fe in situ nanocomposite produced by friction stir processing
2008
Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with $${{\rm Al}_{2}{\rm O}_{3}/0.5\,{\rm Gr}}$$ Al 2 O 3 / 0.5 Gr Hybrid Surface Nanocomposite
2014
Effect of additional processing on texture evolution of Al0.5Cu alloy processed by equal channel angular extrusion (ECAE)
2004
Identifying creep mechanisms in plastic flow
2005
Friction-stir processing of a cold sprayed AA7075 coating layer on the AZ31B substrate: Structural homogeneity, microstructures and hardness
2017
Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening
2017
Improving mechanical properties of chip-based aluminum extrudates by integrated extrusion and equal channel angular pressing (iECAP)
2012
The effect of grain size, strain rate, and temperature on the mechanical behavior of commercial purity aluminum
2006
Grain boundary structure in Al–Mg and Al–Mg–Sc alloys after equal-channel angular pressing
2001
High-strain-rate superplasticity from nanocrystalline Al alloy 1420 at low temperatures
2001
Influence of pressing temperature on microstructural development in equal-channel angular pressing
2000
Characteristics of superplasticity in an ultrafine-grained aluminum alloy processed by ECA pressing
2003
Unique microstructure and simultaneous enhancements of strength and ductility in gradient-microstructured Cu sheet produced by single-roll angular-rolling
2019
Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process
1998
Influence of Equal-Channel Angular Pressing on the Superplastic Properties of Commercial Aluminum Alloys
1999
Using Equal-Channel Angular Pressing for the Production of Superplastic Aluminum and Magnesium Alloys
2004
Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063
2002
Influence of Tool Rotational Speed on the Formation of Friction Stir Processing Zone in Cast Zk60/SiCp Magnesium Alloy Surface Composites
2018
Equal-channel angular pressing: A novel tool for microstructural control
1998
Hall–Petch relation and boundary strengthening
2004 Standout
Continuous dynamic recrystallization in an Al–Li–Mg–Sc alloy during equal-channel angular extrusion
2005
Synthesis and mechanical behavior of nanostructured materials via cryomilling
2005
Friction stir welding and processing
2005 Standout
Scandium in aluminium alloys
2005
Superplastic deformation mechanism of an ultrafine-grained aluminum alloy produced by friction stir processing
2010
Processing by equal-channel angular pressing: Applications to grain boundary engineering
2005
Low-temperature superplasticity in a Cu–Zn–Sn alloy processed by severe plastic deformation
2001
Enhanced mechanical properties of Mg–Al–Zn cast alloy via friction stir processing
2006
Adiabatic shear banding in ultrafine-grained Fe processed by severe plastic deformation
2004
An evaluation of the flow behavior during high strain rate superplasticity in an Al-Mg-Sc alloy
2001
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP
2003
The potential for scaling ECAP: effect of sample size on grain refinement and mechanical properties
2001
Tailoring the residual stress during two-step cold gas spraying and friction-stir surface integration of titanium coating
2019
Influence of ECAP on precipitate distributions in a spray-cast aluminum alloy
2004
Friction stir processing: a novel technique for fabrication of surface composite
2002 Standout
Surface composites by friction stir processing: A review
2015
The processing of ultrafine-grained materials through the application of severe plastic deformation
2007
Revealing the relationship between grain size and corrosion rate of metals
2010 Standout
Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing
2006
Fabrication and thermal stability of a nanocrystalline Ni–Al–Cr alloy: Comparison with pure Cu and Ni
1999
Hall–Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys
2003
Microstructural changes in equal channel angular pressed low carbon steel by static annealing
2000
Effect of pressing temperature on fine-grained structure formation in 7475 aluminum alloy during ECAP
2004
Superplasticity of ultrafine-grained Al–Mg–Sc–Zr alloy
2016
Bulk nanostructured materials from severe plastic deformation
2000 Standout
The fundamentals of nanostructured materials processed by severe plastic deformation
2004
Effect of deformation temperature on the microstructure developed in commercial purity aluminum processed by equal channel angular extrusion
2003
Nanocrystalline structure formation in Al-Mg-Sc alloys during severe plastic deformation
2006
Factors influencing the shearing patterns in equal-channel angular pressing
2002
Creep and superplasticity in nanocrystalline materials: current understanding and future prospects
2001
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
2007 Standout
Grain refinement in a commercial Al–Mg–Sc alloy under hot ECAP conditions
2006
Mechanical behavior of a cryomilled nanostructured Al-7.5 pct Mg alloy
2004
Cryomilled nanostructured materials: Processing and properties
2007
Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformation
2009
Using equal-channel angular pressing for refining grain size
2000
Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy
2003
Friction stir welding of a P/M Al–Al2O3 nanocomposite: Microstructure and mechanical properties
2013
Recrystallization in type 304L stainless steel during friction stirring
2004
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Factors influencing the equilibrium grain size in equal-channel angular pressing: Role of Mg additions to aluminum
1998
Friction stir welding of aluminium alloys
2009 Standout
Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processing
2006
Effect of the number of ECAP pass time on the electrochemical properties of 1050 Al alloys
2003
Achieving enhanced ductility in a dilute magnesium alloy through severe plastic deformation
2004
Combined effects of grain size and recrystallization on the tensile properties of cryorolled pure vanadium
2009
Direct observation of shear deformation during equal channel angular pressing of pure aluminum
1999
Fabrication of metal-matrix AL7075T651/TiN nano composite employing friction stir process
2015
High-strain-rate superplastic behavior of equal-channel angular-pressed 5083 Al-0.2 wt pct Sc
2004
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Surface Modification of Cast Al-17%Si Alloys Using Friction Stir Processing
2015
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Microstructure and mechanical properties of steel/TiC nano-composite surface layer produced by friction stir processing
2012
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Ebsd study on grain boundary characteristics in fine-grained Al alloys
2000
Effects of strain hardenability and strain-rate sensitivity on the plastic flow and deformation homogeneity during equal channel angular pressing
2001
The influence of friction stir processing parameters on microstructure of as-cast NiAl bronze
2005
An investigation of cavity growth in a superplastic aluminum alloy processed by ECAP
2005
Deformation induced grain boundaries in commercially pure aluminium
2000
Continuous ECAP process design for manufacturing a microstructure-refined bolt
2011
Development of fine grained structures using severe plastic deformation
2000
Nickel‐aluminum‐bronze/Al2O3 surface nanocomposite produced by friction‐stir processing: Corrosion properties and microstructure
2017
The influence of ECAP temperature on the stability of Al–Zn–Mg–Cu alloy
2004
Enhanced Strength and Ductility in Ultrafine‐Grained Aluminium Produced by Accumulative Roll Bonding
2004
Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spray-cast aluminum alloy
2003
Effect of Processing Parameters on Microstructure and Mechanical Properties of an Al-Al11Ce3-Al2O3 In-Situ Composite Produced by Friction Stir Processing
2009
Microstructural modification of as-cast Al-Si-Mg alloy by friction stir processing
2006
The effect of extrusion temperature on the development of deformation microstructures in 5052 aluminium alloy processed by equal channel angular extrusion
2003
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
Development of submicron sized grain during cyclic equal channel angular pressing
2001
Using grain boundary engineering to evaluate the diffusion characteristics in ultrafine-grained Al–Mg and Al–Zn alloys
2004
Continuous and discontinuous grain coarsening in a fine-grained particle-containing Al–Sc alloy
2004
Enhanced Strength and Ductility in Ultrafine‐Grained Aluminium Produced by Accumulative Roll Bonding
2004
Texture variation and its influence on the tensile behavior of a friction-stir processed magnesium alloy
2006
Microstructure and mechanical properties of nanocrystalline titanium and Ti–Ta–Nb alloy manufactured using various deformation methods
2005
Microstructural modification of as-cast NiAl bronze by friction stir processing
2004
Deformation of electrodeposited nanocrystalline nickel
2003 Standout
Grain refinement of pure nickel using equal-channel angular pressing
2002
Effect of multiple-pass friction stir processing on microstructure and tensile properties of a cast aluminum–silicon alloy
2006
The Art and Science of Tailoring Materials by Nanostructuring for Advanced Properties Using SPD Techniques
2010
Some factors affecting the creep behaviour of metallic materials processed by equal-channel angular pressing
2009
Nanoscale alloys and core-shell materials: Model predictions of the nanostructure and mechanical properties
2007
High strain rate superplasticity in microcrystalline and nanocrystalline materials
2000
Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening
2000 Standout
Principles of superplasticity in ultrafine-grained materials
2007
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Enhancement of Ductility and Strength through Microstructural Refinement by FSP of Nickel Aluminum Bronze
2006
Processing by Severe Plastic Deformation: Historical Developments and Current Impact
2010
Review: Processing of metals by equal-channel angular pressing
2001
In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing
2012
Effect of welding parameters on mechanical and microstructural properties of AA6056 joints produced by Friction Stir Welding
2006
Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process
1999 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
2004
The evolution of homogeneity and grain refinement during equal-channel angular pressing: A model for grain refinement in ECAP
2005
Influence of scandium on superplastic ductilities in an Al–Mg–Sc alloy
2000
Strengthening and grain refinement in an Al-6061 metal matrix composite through intense plastic straining
1998
Low temperature superplasticity of AZ91 magnesium alloy with non-equilibrium grain boundaries
1999
Works of Patrick B. Berbon being referenced
Tensile and creep behavior of cryomilled Inco 625
2003
Influence of pressing speed on microstructural development in equal-channel angular pressing
1999
An Investigation of the Properties of an Al-Mg-Li-Zr Alloy after Equal-Channel Angular Pressing
1996
OBSERVATIONS OF HIGH STRAIN RATE SUPERPLASTICITY IN COMMERCIAL ALUMINUM ALLOYS WITH ULTRAFINE GRAIN SIZES
1997
High strain rate superplasticity in an Al-Mg alloy containing scandium
1998
Superplasticity of Ultrafine-Grained Aluminium Alloys Processed by Equal-Channel Angular Pressing
1999
Requirements for achieving high-strain-rate superplasticity in cast aluminium alloys
1998
Production of Ultrafine-Grained Metallic Materials Using an Intense Plastic Straining Technique
1996
Developing superplastic properties in an aluminum alloy through severe plastic deformation
1999
An Evaluation of Superplasticity in Aluminum-Scandium Alloys Processed by Equal-Channel Angular Pressing
1999
Microstructure characterization and creep deformation of an Al-10 Wt Pct Ti-2 Wt Pct Cu nanocomposite
2004
Friction stir processing: a tool to homogenize nanocomposite aluminum alloys
2001
Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy
2009
Age hardening and the potential for superplasticity in a fine-grained Al-Mg-Li-Zr alloy
1998
Fabrication of bulk ultrafine-grained materials through intense plastic straining
1998
Plastic flow and fracture behavior of an Al-Ti-Cu nanocomposite
2001
Deformation heating and its effect on grain size evolution during equal channel angular extrusion
2001