Citation Impact
Citing Papers
New crosslinkers for electrospun chitosan fibre mats. I. Chemical analysis
2012
Bioresponsive hydrogels
2007
Effect of vapor-phase glutaraldehyde crosslinking on electrospun starch fibers
2015
Photopolymerization and photostructuring of molecularly imprinted polymers for sensor applications—A review
2011
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
2007
Self-complementary oligopeptide matrices support mammalian cell attachment
1995
Trends in the design of nerve guidance channels in peripheral nerve tissue engineering
2015
The treatment of collagen fibrils by tissue transglutaminase to promote vascular smooth muscle cell contractile signaling
2009
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
2004 Standout
Preparation, characterization, and in vitro enzymatic degradation of chitosan‐gelatine hydrogel scaffolds as potential biomaterials
2012
Polymers derived from the amino acid l-tyrosine: polycarbonates, polyarylates and copolymers with poly(ethylene glycol)
2003
Challenges for the effective molecular imprinting of proteins
2011
Hydrogels in Regenerative Medicine
2009 Standout
Effect of cross-linking agents on the dynamic mechanical properties of hydrogel blends of poly(acrylic acid)-poly(vinyl alcohol-vinyl acetate)
1996
A highly elastic tissue sealant based on photopolymerised gelatin
2010
Hydrogels for tissue engineering: scaffold design variables and applications
2003 Standout
Bacterial and Candida albicans adhesion on rapid prototyping‐produced 3D‐scaffolds manufactured as bone replacement materials
2008
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
2010
Degradation behaviour of self-reinforced 80L/20G PLGA devices in vitro
2003
Poly(ortho esters) â their development and some recent applications
2000
Design and development of molecularly imprinted polymers for the selective extraction of deltamethrin in olive oil: An integrated computational-assisted approach
2015
Dynamic control over cell adhesive properties using molecular-based surface engineering strategies
2009 StandoutNobel
Molecular imprinting of proteins in polymers attached to the surface of nanomaterials for selective recognition of biomacromolecules
2013
Designing peptide based nanomaterials
2008 Standout
Biomedical applications of biodegradable polymers
2011 Standout
Biocompatible Zr-based nanoscale MOFs coated with modified poly(ε-caprolactone) as anticancer drug carriers
2016
ABA-triblock copolymers from biodegradable polyester A-blocks and hydrophilic poly(ethylene oxide) B-blocks as a candidate for in situ forming hydrogel delivery systems for proteins
2002
Surface modified poly(L ‐lactide‐co‐ε‐caprolactone) microspheres as scaffold for tissue engineering
2007
Alginate: Properties and biomedical applications
2011 Standout
Organocatalytic Ring-Opening Polymerization
2007 Standout
Core-shell nanostructured molecular imprinting fluorescent chemosensor for selective detection ofatrazine herbicide
2010
3D bioprinting of tissues and organs
2014 Standout
Selective extraction of sulfonamides from food by use of silica-coated molecularly imprinted polymer nanospheres
2010
The mechanisms of drug release in poly(lactic-co-glycolic acid)-based drug delivery systems—A review
2011
Advances in the manufacture of MIP nanoparticles
2010
Biomedical applications of collagen
2001 Standout
Dry double-sided tape for adhesion of wet tissues and devices
2019 StandoutNature
Technology of mammalian cell encapsulation
2000
Biological and Medical Significance of Calcium Phosphates
2002 Standout
Recent advances in molecular imprinting technology: current status, challenges and highlighted applications
2011 Standout
Porous scaffold design for tissue engineering
2005 Standout
Effect of wettability and surface functional groups on protein adsorption and cell adhesion using well-defined mixed self-assembled monolayers
2007
Cross-linking methods of electrospun fibrinogen scaffolds for tissue engineering applications
2008
Forced protein unfolding leads to highly elastic and tough protein hydrogels
2013 StandoutNobel
Hydrogels based on chitosan and dextran as potential drug delivery systems
1999
Improved properties of amorphous calcium phosphate fillers in remineralizing resin composites
1996
Critical review and perspective of macromolecularly imprinted polymers
2011
Stimulus-responsive hydrogels: Theory, modern advances, and applications
2015
Engineered Nanoparticles for Drug Delivery in Cancer Therapy
2014 Standout
Synthesis and characterization of photocrosslinkable, degradable poly(vinyl alcohol)-based tissue engineering scaffolds
2002
Genipin‐cross‐linked collagen/chitosan biomimetic scaffolds for articular cartilage tissue engineering applications
2010
Configurational biomimesis in drug delivery: molecular imprinting of biologically significant molecules
2004
A hyperstable collagen mimic
1999
Fabrication of novel biomaterials through molecular self-assembly
2003 Standout
Molecularly imprinted polymers microsphere prepared by precipitation polymerization for hydroquinone recognition
2007
Bioinspired structural materials
2014 Standout
Water transport in polylactic acid (PLA), PLA/ polycaprolactone copolymers, and PLA/polyethylene glycol blends
1997
Molecular imprinting science and technology: a survey of the literature for the years 2004-2011
2014
Design and Preparation of Porous Polymers
2012 Standout
Hydrogels in Biology and Medicine: From Molecular Principles to Bionanotechnology
2006 Standout
Size matters: Challenges in imprinting macromolecules
2013
Mechanical properties of bioactive amorphous calcium phosphate/methacrylate composites
1998
Polylactic Acid Technology
2000 Standout
Computational Strategies for the Design and Study of Molecularly Imprinted Materials
2013
Functional copolymers of N-isopropylacrylamide for bioengineering applications
2007
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials
2015 Standout
Synthesis and characteristics of interpenetrating polymer network hydrogel composed of chitosan and poly(acrylic acid)
1999
Computer Simulation of Volatile Organic Compound Adsorption in Atomistic Models of Molecularly Imprinted Polymers
2009
Polymeric Systems for Controlled Drug Release
1999 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
A study of the forward production of charm particle pairs in p-Fe and π−-Fe interactions
1982 StandoutNobel
Ion Pair Reinforced Semi-Interpenetrating Polymer Network for Direct Methanol Fuel Cell Applications
2012 StandoutNobel
Hydrogels for Tissue Engineering
2001 Standout
Degradable Controlled-Release Polymers and Polymeric Nanoparticles: Mechanisms of Controlling Drug Release
2016 Standout
Electrophilicity Index
2006 Standout
Cross‐Linked Chitosan as a Polymer Network Binder for an Antimony Anode in Sodium‐Ion Batteries
2016 StandoutNobel
Synthesis, Characterization, and Hydrolytic Degradation of PLA/PEO/PLA Triblock Copolymers with Short Poly(l -lactic acid) Chains
1996
Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres
2007
Molecular imprinting into organogel nanofibers
2011
Spacer-Free Ionic Dye−Polyelectrolyte Complexes: Influence of Molecular Structure on Liquid Crystal Order and Photoinduced Motion
2009
Magnetically Guided Release of Ciprofloxacin from Superparamagnetic Polymer Nanocomposites
2011
Evaluation of poly(vinyl alcohol) hydrogels as a component of hybrid artificial tissues
1995
Collagen Structure and Stability
2009 Standout
Imprinting of Molecular Recognition Sites on Nanostructures and Its Applications in Chemosensors
2008
Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals
2014 Standout
Characteristic and Synthetic Approach of Molecularly Imprinted Polymer
2006
Genipin-crosslinked chitosan hydrogels as biomedical and pharmaceutical aids
2009 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Functional π-Gelators and Their Applications
2014 Standout
Synthesis of Magnetic Molecularly Imprinted Poly(ethylene-co-vinyl alcohol) Nanoparticles and Their Uses in the Extraction and Sensing of Target Molecules in Urine
2010
Molecularly imprinted polymers with specific recognition for macromolecules and proteins
2007
Effects of Chitosan-Coated Fibers as a Scaffold for Three-Dimensional Cultures of Rabbit Fibroblasts for Ligament Tissue Engineering
2010
Review : Polymers for Absorbable Surgical Sutures—Part II
1991
Supramolecular Helical Systems: Helical Assemblies of Small Molecules, Foldamers, and Polymers with Chiral Amplification and Their Functions
2016 Standout
Main properties and current applications of some polysaccharides as biomaterials
2007 Standout
Template polymerisation and co-polymerisation
2002
Polyelectrolyte complexes obtained by radical polymerization in the presence of chitosan
1996
Radical polymerization of 2,3-dimethyl-1,3-butadiene in coordination nanochannels
2015 StandoutNobel
Biodegradable Porous Polymers through Emulsion Templating
2009
Controlled Ring-Opening Polymerization of Lactide and Glycolide
2004 Standout
Reactive Oxygen Species (ROS)-Based Nanomedicine
2019 Standout
Limits on D0-0 mixing and bottom particle production cross section from hadronically produced same-sign dimuon events
1982 StandoutNobel
Fabrication and Properties of Polycaprolactone Composites Containing Calcium Phosphate-Based Ceramics and Bioactive Glasses in Bone Tissue Engineering: A Review
2017
Development of biodegradable porous scaffolds for tissue engineering
2001
Anomalous Production of High-Energy Muons ine + e −
1976
Recent results in electron-positron annihilation above 2 GeV
1977 StandoutNobel
Blood compatibility of polyethylene oxide surfaces
1995
Metal-Catalyzed Living Radical Polymerization
2001 Standout
The Halogen Bond
2016 Standout
Well-defined transition metal complexes with phosphorus and nitrogen ligands for 1,3-dienes polymerization
2009
Magnetic Nanoparticles: Design and Characterization, Toxicity and Biocompatibility, Pharmaceutical and Biomedical Applications
2012 Standout
Influence of Chain Length on the Electrophilic Reactivity of Carbocations
2002
Synthesis and Characterization of [l ]-Lactide−Ethylene Oxide Multiblock Copolymers
1997
The rational development of molecularly imprinted polymer-based sensors for protein detection
2010
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
2003
Porous Polycaprolactone−Polystyrene Semi-interpenetrating Polymer Networks Synthesized within High Internal Phase Emulsions
2008
Modern cationic vinyl polymerization
1991
The biodegradation of poly (ester-ether-ester) block copolymers in a cellular environmentin vitro
1994
3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs
2014 Standout
Physical Hydrogels of Poly(vinyl alcohol) with Different Syndiotacticity Prepared in the Presence of Lactosilated Chitosan Derivatives
2003
Chitosan Chemistry and Pharmaceutical Perspectives
2004 Standout
Metal–Organic Framework (MOF)‐Based Drug/Cargo Delivery and Cancer Therapy
2017 Standout
A degradable, porous, emulsion‐templated polyacrylate
2009
Molecular imprinting: perspectives and applications
2016 Standout
Works of P. Giusti being referenced
Acrylic polymeric nanospheres for the release and recognition of molecules of clinical interest
2004
Bioartificial polymeric materials: a new method to design biomaterials by using both biological and synthetic polymers
1993
Innovative tissue engineering structures through advanced manufacturing technologies
2004
Molecularly imprinted bioartificial membranes for the selective recognition of biological molecules. Part 2: release of components and thermal analysis
2005
Melt-extruded guides for peripheral nerve regeneration. Part I: Poly(ε-caprolactone)
2009
Towards the design of highly selective recognition sites into molecular imprinting polymers: A computational approach
2006
Molecularly imprinted nanoparticles with recognition properties towards a laminin H–Tyr–Ile–Gly–Ser–Arg–OH sequence for tissue engineering applications
2010
Osteoblast responses to collagen-PVA bioartificial polymers in vitro: the effects of cross-linking method and collagen content
1998
SOFT‐MI: A novel microfabrication technique integrating soft‐lithography and molecular imprinting for tissue engineering applications
2010
Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)/poly(ϵ‐caprolactone) blends for tissue engineering applications in the form of hollow fibers
2007
Molecularly imprinted bioartificial membranes for the selective recognition of biological molecules
2004
Genipin-crosslinked chitosan/gelatin blends for biomedical applications
2007
Poly(ester urethane) Guides for Peripheral Nerve Regeneration
2010
Enzymatically crosslinked porous composite matrices for bone tissue regeneration
2009
The relevance of the transfer of molecular information between natural and synthetic materials in the realisation of biomedical devices with enhanced properties
2005
Combined drug release from biodegradable bilayer coating for endovascular stents
2010
Transglutaminase Reactivity with Gelatine: Perspective Applications in Tissue Engineering
2006
New biomedical devices with selective peptide recognition properties. Part 1: Characterization and cytotoxicity of molecularly imprinted polymers
2007
Supported imprinted nanospheres for the selective recognition of cholesterol
2006
Bioartificial materials based on collagen: 1. Collagen cross-linking with gaseous glutaraldehyde
1996
Measurement of the Λ c + transverse-momentum production distribution in pp interactions at √s = 62 GeV
1981
Poly(ester-ether-ester) block copolymers as biomaterials
1994
Polyurethane-polydimethylsiloxane (PU-PDMS) tubular membranes for pancreatic islet transplantation. Permselectivity and diffusion studies
1992
Preparation and characterization of permselective, biocompatible membranes for the macroencapsulation of pancreatic islets
1994
Evidence for a new particle with naked «beauty» and for its associated production in high-energy (pp) interactions
1981
Molecularly imprinted submicronspheres for applications in a novel model biosensor-film
2010
Physico-chemical and mechanical characterization of hydrogels of poly (vinyl alcohol) and hyaluronic acid
1994
Copolymerization of acrylic acid and 2-hydroxyethyl methacrylate onto poly(N-vinylpyrrolidone): Template influence on comonomer reactivity
2000
Poly(ethylene-co-vinyl alcohol) membranes with specific adsorption properties for potential clinical application
2006
Enzymatically‐Modified Melt‐Extruded Guides for Peripheral Nerve Repair
2008
Hydrogels of poly(vinyl alcohol) and collagen as new bioartificial materials
1993
Novel bioactive scaffolds with fibronectin recognition nanosites based on molecular imprinting technology
2010
Poly(ethylene‐co‐vinyl alcohol) Membranes with Specific Adsorption Properties for Potential Clinical Application
2007
Molecularly imprinted membranes for an improved recognition of biomolecules in aqueous medium
2006
Modelling of polymerization reactions
1982
Blends of hyaluronic acid derivatives with ethylene-vinyl alcohol copolymers as potential biomaterials
1994
Preparation and characterization of poly(para‐biphenyl acrylate)
1971
Studies on polymerizations initiated by syncatalytic systems based on aluminium organic compounds, 7. Reaction mechanisms
1977
Modelling of polymerization reactions
1983
Block copolymers of L-lactide and poly(ethylene glycol) for biomedical applications
1994
NON CONVENTIONAL SURFACE FUNCTIONALIZATION OF POROUS POLY-ε-CAPROLACTONE SCAFFOLDS USING BIOACTIVE MOLECULARLY IMPRINTED NANOSPHERES
2010
Measurement of associated charm production in pp interactions at $$\sqrt s = 62 GeV$$
1981
Polymeric devices containing imprinted nanospheres: a novel approach to improve recognition in water for clinical uses
2005
Kinetics and reaction mechanism of template polymerization investigated by conductimetric measurements. 2. Radical polymerization of sodium methacrylate in the presence of poly(allylamine) hydrochloride
1999
Physicochemical properties of poly(allylammonium acrylate) complexes obtained by radical template polymerization
1994
Kinetics and reaction mechanism of template polymerization investigated by conductimetric measurements. Part 3. Radical polymerization of acrylic acid in the presence of poly(N-vinylpyrrolidone)
2000
Polymers in Medicine II
1987
Structural order in polymers
1981
The leading effect in A c + production at √s = 62 GeV in proton-proton collisions
1981
Acrylonitrile‐Acrylic Acid Copolymer Membrane Imprinted with Uric Acid for Clinical Uses
2004
Blends of Poly-(ε-caprolactone) and Polysaccharides in Tissue Engineering Applications
2005
Polymers in Medicine
1983
Composite membranes modified with recognition-able nanobeads as potential adsorbers for purification of biological fluids.
2012
Engineering membranes for molecular recognition
2003
An experimental study of acoplanar (Μ±Μ±) pairs produced in (e+e-) annihilation
1975
Bioartificial materials based on blends of dextran and poly(vinyl alcohol-co-acrylic acid)
2005