Citation Impact
Citing Papers
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Support Structures for Additive Manufacturing: A Review
2018 Standout
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
2014
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Effect of deposition strategy on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by pulsed plasma arc deposition
2012
Recent developments in stainless steels
2009 Standout
Investigation into the failure of Inconel exhaust collector produced by laser consolidation
2013
Selective laser melting of 316L stainless steel: Influence of TiB2 addition on microstructure and mechanical properties
2019
Research on Process and Microstructure Formation of W-Ni-Fe Alloy Fabricated by Selective Laser Melting
2010
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
2018 Standout
Laser surface hardening of austempered (bainitic) ball bearing steel
2007
An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
2015
Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
2019
Internet of things and supply chain management: a literature review
2017 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed nickel-based superalloy 625
2016
Repair and manufacturing of single crystal Ni-based superalloys components by laser powder deposition—A review
2014
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
2016
Review of selective laser melting: Materials and applications
2015 Standout
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
2015 Standout
Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy during Pulsed Plasma Arc Deposition Process
2013
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique — Optimization of process parameters
2014
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC
2012
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
2014 Standout
Steels for bearings
2011 Standout
Predictive maintenance in the Industry 4.0: A systematic literature review
2020 Standout
Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis
2014
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
2009
Advances in additive manufacturing of metal-based functionally graded materials
2020
A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy
2019
Microstructure and mechanical properties of 12wt.% Cr ferritic stainless steel with Ti and Nb dual stabilization
2008
A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy
2019
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing
2014
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Selective Laser Melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance
2010
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Continuous maintenance and the future – Foundations and technological challenges
2016
Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life
2019
Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel
2013
Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
2014
Hardened austenite steel with columnar sub-grain structure formed by laser melting
2014
Characterizing surface finish and fatigue behavior in binder-jet 3D-printed nickel-based superalloy 625
2018
Vision-based defect detection in laser metal deposition process
2014
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Residual stresses in laser direct metal deposited Waspaloy
2010
Laser powder deposition
2009
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Additive manufacturing methods and modelling approaches: a critical review
2015 Standout
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
2015
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Effect of location on microstructure and mechanical properties of additive layer manufactured Inconel 625 using gas tungsten arc welding
2016
Reciprocating wear behavior of 7075Al/SiC in comparison with 6061Al/Al2O3 composites
2014
Characterization of stainless steel parts by Laser Metal Deposition Shaping
2013
Microstructure evolution of Inconel 625 with 0.4 wt% boron modification during gas tungsten arc deposition
2016
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Additive manufacturing of metals
2016 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Powder characterisation techniques and effects of powder characteristics on part properties in powder-bed fusion processes
2016
Laser metal deposition of Inconel 625: Microstructure and mechanical properties
2012
Works of P. Ganesh being referenced
Comparison of Laser and Gas Tungsten Arc Weldments of Stabilized 17 wt% Cr Ferritic Stainless Steel
2003
Characterization of dry sliding wear resistance of laser surface hardened En 8 steel
2004
Fatigue Crack Propagation and Fracture Toughness of Laser Rapid Manufactured Structures of AISI 316L Stainless Steel
2014
Investigating laser rapid manufacturing for Inconel-625 components
2006
Fatigue and fracture toughness characteristics of laser rapid manufactured Inconel 625 structures
2010
Microstructure and mechanical properties of TiB2–TiC–Al2O3–SiC composite coatings developed by combined SHS, sol–gel and laser technology
2010
Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel
2012
Development of a hard nano-structured multi-component ceramic coating by laser cladding
2008
A New Vacuum Brazing Route for Niobium-316L Stainless Steel Transition Joints for Superconducting RF Cavities
2014
Laser rapid manufacturing of bi-metallic tube with Stellite-21 and austenitic stainless steel
2009