Citation Impact
Citing Papers
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
2013 Standout
Hallmarks of Cancer: The Next Generation
2011 Standout
Bone marrow-derived mesenchymal stem cells and the tumor microenvironment
2010
Additive manufacturing: technology, applications and research needs
2013 Standout
Automatic Algorithm for Generating Complex Polyhedral Scaffold Structures for Tissue Engineering
2004
Salt Fusion: An Approach to Improve Pore Interconnectivity within Tissue Engineering Scaffolds
2002
Preparation of bovine hydroxyapatite by transferred arc plasma
2010
Nanocrystalline hydroxyapatite bioceramic using microwave radiation: Synthesis and characterization
2009
Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication
2013
Influence of interphase layer on the overall elasto-plastic behaviors of HA/PEEK biocomposite
2004
Poly-ε-caprolactone/hydroxyapatite for tissue engineering scaffold fabrication via selective laser sintering
2006
A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics
2011 Standout
Mechanical and in vitro biological performances of hydroxyapatite–carbon nanotube composite coatings deposited on Ti by aerosol deposition
2009
Nanomedicine—Challenge and Perspectives
2009
Induction plasma sprayed nano hydroxyapatite coatings on titanium for orthopaedic and dental implants
2010 Standout
Nanosized and nanocrystalline calcium orthophosphates
2009
Tetracalcium phosphate: Synthesis, properties and biomedical applications
2010
Developing bioactive composite materials for tissue replacement
2003
1000 at 1000: The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method
2020
α-Tricalcium phosphate: Synthesis, properties and biomedical applications
2011
In vitro behavior of HVOF sprayed calcium phosphate splats and coatings
2002
Nanocrystalline hydroxyapatite with simultaneous enhancements in hardness and toughness
2009
Bacterial and Candida albicans adhesion on rapid prototyping‐produced 3D‐scaffolds manufactured as bone replacement materials
2008
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
2010
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
2006 Standout
Innovative tissue engineering structures through advanced manufacturing technologies
2004
Low-Density Lipoprotein Receptor-Related Protein-1 Mediates Endocytic Clearance of Tissue Inhibitor of Metalloproteinases-1 and Promotes Its Cytokine-Like Activities
2014 StandoutNobel
Development of a 95/5 poly(L ‐lactide‐co‐glycolide)/hydroxylapatite and β‐tricalcium phosphate scaffold as bone replacement material via selective laser sintering
2007
TiO2 Nanotubes: Synthesis and Applications
2011 Standout
PEEK biomaterials in trauma, orthopedic, and spinal implants
2007 Standout
A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites
2016
Review: Bioanalytical applications of biomolecule-functionalized nanometer-sized doped silica particles
2009
Collagen-Hydroxyapatite Composites for Hard Tissue Repair
2006
Recent advances in 3D printing of biomaterials
2015
Porous polycaprolactone scaffold for cardiac tissue engineering fabricated by selective laser sintering
2009
Hydroxyapatite-coated Ti–6Al–4V
2002
3D bioprinting of skin: a state-of-the-art review on modelling, materials, and processes
2016
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
A review of rapid prototyping techniques for tissue engineering purposes
2008
Alginate: Properties and biomedical applications
2011 Standout
The long-term mechanical integrity of non-reinforced PEEK-OPTIMA polymer for demanding spinal applications: experimental and finite-element analysis
2005
Novel polymer‐synthesized ceramic composite–based system for bone repair: An in vitro evaluation
2004
3D bioprinting of tissues and organs
2014 Standout
Characterization of the bone-like apatite precipitated on high velocity oxy-fuel (HVOF) sprayed calcium phosphate deposits
2002
Fabrication of HAp–ZrO2 (3Y) nano-composite by SPS
2002
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
2004
Microwave-processed nanocrystalline hydroxyapatite: Simultaneous enhancement of mechanical and biological properties
2010
Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: Synthesis and application
2010
Surface modification by alkali and heat treatments in titanium alloys
2002
Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
2016
Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects
2004
Capturing complex 3D tissue physiology in vitro
2006 Standout
In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing
2007
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
2005 Standout
Biological and Medical Significance of Calcium Phosphates
2002 Standout
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants
2007
Porous scaffold design for tissue engineering
2005 Standout
Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution
2007
The role of surface charge on the uptake and biocompatibility of hydroxyapatite nanoparticles with osteoblast cells
2011
Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro
2006
Fabrication of freeform bone‐filling calcium phosphate ceramics by gypsum 3D printing method
2009
Rapid formation of plasma protein corona critically affects nanoparticle pathophysiology
2013 Standout
Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing
2008
Bond strength of plasma-sprayed hydroxyapatite/Ti composite coatings
2000
Gold nanoparticles in biomedical applications: recent advances and perspectives
2011 Standout
Microenvironmental regulation of tumor progression and metastasis
2013 Standout
Effect of βTCP filled polyetheretherketone on osteoblast cell proliferationin vitro
2005
Protein expression profiles in osteoblasts in response to differentially shaped hydroxyapatite nanoparticles
2009
Engineered Nanoparticles for Drug Delivery in Cancer Therapy
2014 Standout
Nanoscale hydroxyapatite particles for bone tissue engineering
2011 Standout
In vivo evaluation of plasma sprayed hydroxyapatite coatings having different crystallinity
2003
Properties and immersion behavior of magnetron-sputtered multi-layered hydroxyapatite/titanium composite coatings
2003
Nanopharmacy: Inorganic nanoscale devices as vectors and active compounds
2010
Metzincin Proteases and Their Inhibitors: Foes or Friends in Nervous System Physiology?
2010
Polyetheretherketone as a biomaterial for spinal applications
2005
Decarbonising ceramic manufacturing: A techno-economic analysis of energy efficient sintering technologies in the functional materials sector
2019
Hydrothermal processing of hydroxyapatite nanoparticles—A Taguchi experimental design approach
2012
Photothermal therapy and photoacoustic imaging via nanotheranostics in fighting cancer
2018 Standout
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Fabrication of Nanostructured Hydroxyapatite via Hydrothermal Synthesis and Spark Plasma Sintering
2005
Rapid manufacturing of PA/HDPE blend specimens by selective laser sintering: Microstructural characterization
2007
A simple route to prepare stable hydroxyapatite nanoparticles suspension
2008
A Thermally Insulating Textile Inspired by Polar Bear Hair
2018 Standout
Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review
2011
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
2006 Standout
Human Bone Marrow-Derived Mesenchymal Stem Cells Suppress Human Glioma Growth Through Inhibition of Angiogenesis
2012
Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: state of the art and recent developments
2003
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
2005 Standout
Synthesis of calcium phosphates and porous hydroxyapatite beads prepared by emulsion method
2008
3D Fabrication of Polymeric Scaffolds for Regenerative Therapy
2016
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
2007 Standout
Laser-surface-alloyed carbon nanotubes reinforced hydroxyapatite composite coatings
2005
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
2010 Standout
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Microstructure and mechanical properties of porous alumina ceramic prepared by a combination of 3–D printing and sintering
2016
Bioinspired Hydroxyapatite/Poly(methyl methacrylate) Composite with a Nacre‐Mimetic Architecture by a Bidirectional Freezing Method
2015
Preparation and characterization of a novel hydroxyapatite/carbon nanotubes composite and its interaction with osteoblast-like cells
2008
Selective laser sintering of polymer biocomposites based on polymethyl methacrylate
2014
Extraction of pure natural hydroxyapatite from the bovine bones bio waste by three different methods
2008
Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
2014
Mechanical properties of hydroxyapatite ceramics sintered from powders with different morphologies
2011
Calcium phosphate nanoparticles in biomineralization and biomaterials
2008
Synthesis of hydroxyapatite nanoparticles in ultrasonic precipitation
2005
Nanotechnology for Multimodal Synergistic Cancer Therapy
2017 Standout
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
On the simultaneous use of La0.75Sr0.25Cr0.5Mn0.5O3−δ as both anode and cathode material with improved microstructure in solid oxide fuel cells
2006
Hydroxyapatite extracted from fish scale: Effects on MG63 osteoblast-like cells
2011
Electrosprayed nanoparticles and electrospun nanofibers based on natural materials: applications in tissue regeneration, drug delivery and pharmaceuticals
2014 Standout
Characterization and thermal behavior of calcium deficient hydroxyapatite whiskers with various Ca/P ratios
2011
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Effect of vapor-flame treatment on plasma sprayed hydroxyapatite coatings
2000
A review of anode materials development in solid oxide fuel cells
2004
Wear studies of hydroxyapatite composite coating reinforced by carbon nanotubes
2006
Hydroxyapatite nanopowders: Synthesis, densification and cell–materials interaction
2006
Materials for additive manufacturing
2017
Nanostructured hydroxyapatite powders produced by a flame-based technique
2009
Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications
2015
The effect of temperature on the properties of hydroxyapatite precipitated from calcium hydroxide and phosphoric acid
2001
Encapsulation and release of biomolecules from Ca–P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering
2010
Selective Laser Sintering of Si<sub>3</sub>N<sub>4</sub> and Al<sub>2</sub>O<sub>3</sub> Ceramic Powders
2008
Advances in thermoelectric materials research: Looking back and moving forward
2017 StandoutScience
Main properties and current applications of some polysaccharides as biomaterials
2007 Standout
3D‐Printing of Lightweight Cellular Composites
2014 Standout
Fabrication and characterization of three-dimensional poly(ether-ether-ketone)/-hydroxyapatite biocomposite scaffolds using laser sintering
2005
Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges
2011
Potential of cold gas dynamic spray as additive manufacturing technology
2013
Rationally Designing High-Performance Bulk Thermoelectric Materials
2016 Standout
Reactive Oxygen Species (ROS)-Based Nanomedicine
2019 Standout
Maleimide-Functionalized Self-Assembled Monolayers for the Preparation of Peptide and Carbohydrate Biochips
2002
Graphene oxide/hydroxyapatite composite coatings fabricated by electrophoretic nanotechnology for biological applications
2013
High proton-conducting Nafion/calcium hydroxyphosphate composite membranes for fuel cells
2004
Morphological stability of hydroxyapatite precursor
2003
Rapid manufacturing of polyethylene parts with controlled pore size gradients using selective laser sintering
2007
Alternative anode materials for solid oxide fuel cells
2007 StandoutNobel
Effect of carbon nanotube and aluminum oxide addition on plasma-sprayed hydroxyapatite coating's mechanical properties and biocompatibility
2009
Continuous liquid interface production of 3D objects
2015 StandoutScience
The microstructural characterization of PA6/PA12 blend specimens fabricated by selective laser sintering
2009
Carbon nanotube toughened hydroxyapatite by spark plasma sintering: Microstructural evolution and multiscale tribological properties
2010
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
2015
Core/Shell Nanoparticles: Classes, Properties, Synthesis Mechanisms, Characterization, and Applications
2011 Standout
Surfactant-free solvothermal synthesis of hydroxyapatite nanowire/nanotube ordered arrays with biomimetic structures
2010
Tension–tension fatigue behavior of hydroxyapatite reinforced polyetheretherketone composites
2003
3D printing of ceramics: A review
2018 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Cobalt-based double-perovskite symmetrical electrodes with low thermal expansion for solid oxidefuel cells
2011 StandoutNobel
Fabrication of CNT-Reinforced HAp Composites by Spark Plasma Sintering
2007
Some important factors in the wet precipitation process of hydroxyapatite
2003
Selective laser sintering of PA12/HDPE blends: Effect of components on elastic/plastic behavior
2008
Encapsulating Mobile Proton Carriers into Structural Defects in Coordination Polymer Crystals: High Anhydrous Proton Conduction and Fuel Cell Application
2016 StandoutNobel
Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants
1998 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Electroceramics for High-Energy Density Capacitors: Current Status and Future Perspectives
2021 Standout
Effect of Hydroxyapatite on Biodegradable Scaffolds Fabricated by SLS
2008
Selective Laser Sintering of Hydroxyapatite Reinforced Polyethylene Composites for Bioactive Implants and Tissue Scaffold Development
2006
Synthetic nacre by predesigned matrix-directed mineralization
2016 StandoutScience
Calcium orthophosphate-based biocomposites and hybrid biomaterials
2009
Template-directed hydrothermal synthesis of dandelion-like hydroxyapatite in the presence of cetyltrimethylammonium bromide and polyethylene glycol
2009
Additive Manufacturing of Ceramic‐Based Materials
2014
Nanodimensional and Nanocrystalline Apatites and Other Calcium Orthophosphates in Biomedical Engineering, Biology and Medicine
2009
A novel thermolysis method of colloidal protein precursors to prepare hydroxyapatite nanocrystals
2008
Composites by rapid prototyping technology
2009
3D printing of hydroxyapatite: Effect of binder concentration in pre-coated particle on part strength
2007
Selective Laser Sintering Process Optimization for Layered Manufacturing of CAPA® 6501 Polycaprolactone Bone Tissue Engineering Scaffolds
2005
Effect of process parameters on the performance of spray dried hydroxyapatite microspheres
2008
Biomedical production of implants by additive electro-chemical and physical processes
2012
Low water uptake content and low water/methanol transport in CP/Nafion hybrid membrane with high non-hydrogen bonding
2005
Atomically Precise Clusters of Noble Metals: Emerging Link between Atoms and Nanoparticles
2017 Standout
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Nano-crystallinite hydroxyapatite synthesized by neutralization with the assist of citric acid
2007
Crystalline behaviors of hydroxyapatite in the neutralized reaction with different citrate additions
2008
Rapid prototyping in tissue engineering: challenges and potential
2004
Works of P. Cheang being referenced
Plasma-sprayed hydroxyapatite (HA) coatings with flame-spheroidized feedstock: microstructure and mechanical properties
2000
Pulsed laser treatment of plasma-sprayed hydroxyapatite coatings
1996
Experimental studies on a new bioactive material: HAIonomer cements
2002
Impact formation and microstructure characterization of thermal sprayed hydroxyapatite/titania composite coatings
2002
Spark plasma sintering of hydroxyapatite powders
2002
Addressing processing problems associated with plasma spraying of hydroxyapatite coatings
1996
Tensile properties, tension–tension fatigue and biological response of polyetheretherketone–hydroxyapatite composites for load-bearing orthopedic implants
2003
Processing–microstructure–property relations in HVOF sprayed calcium phosphate based bioceramic coatings
2003
HSV-1 amplicon viral vector-mediated gene transfer to human bone marrow-derived mesenchymal stem cells
2008
Microstructure and mechanical properties of plasma sprayed HA/YSZ/Ti–6Al–4V composite coatings
2004
In vitro studies of plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid (SBF)
2003
Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends
2003
Effect of spark plasma sintering on the microstructure and in vitro behavior of plasma sprayed HA coatings
2003
An in vitro investigation of plasma sprayed hydroxyapatite (HA) coatings produced with flame-spheroidized feedstock
2002
Bone-like apatite layer formation on hydroxyapatite prepared by spark plasma sintering (SPS)
2004
Significance of melt-fraction in HVOF sprayed hydroxyapatite particles, splats and coatings
2003
Nanosized bioceramic particles could function as efficient gene delivery vehicles with target specificity for the spleen
2007
Nanostructural characteristics, mechanical properties, and osteoblast response of spark plasma sintered hydroxyapatite
2007
In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites
2004
Activity of plasma sprayed yttria stabilized zirconia reinforced hydroxyapatite/Ti–6Al–4V composite coatings in simulated body fluid
2003
Titanium dioxide reinforced hydroxyapatite coatings deposited by high velocity oxy-fuel (HVOF) spray
2002
Radio frequency (rf) plasma spheroidized HA powders: powder characterization and spark plasma sintering behavior
2004
Microstructure and mechanical properties of spark plasma sintered zirconia-hydroxyapatite nano-composite powders
2005
Deposition of Amorphous Aluminium Powder Using Cold Spray
2012
Influence of processing parameters in the plasma spraying of hydroxyapatite/Ti–6Al–4V composite coatings
1999
Chitosan-mediated crystallization and assembly of hydroxyapatite nanoparticles into hybrid nanostructured films
2007
Plasma sprayed hydroxyapatite(HA) coatings produced with flame spheroidised powders
1997
HVOF spraying of nanostructured hydroxyapatite for biomedical applications
2005
The effects of ZrO2 on the phase compositions of plasma sprayed HA/YSZ composite coatings
2000
Thermal spraying of functionally graded coatings for biomedical applications
1998
Thermal processing of hydroxyapatite reinforced polyetheretherketone composites
1999
Effect of particulate morphology on the tensile behaviour of polymer–hydroxyapatite composites
2003
Young's modulus and fracture toughness determination of high velocity oxy-fuel-sprayed bioceramic coatings
2002
Synthesis and Characterisation of Hydroxyapatite Nano-Rods/Whiskers
2005
Thermally induced crystallization of amorphous calcium phosphate in plasma-spheroidised hydroxyapatite powders
2000
Matrix Metalloproteinase 1 Is Necessary for the Migration of Human Bone Marrow-Derived Mesenchymal Stem Cells Toward Human Glioma
2009
Plasma spraying of functionally graded hydroxyapatite/Ti–6Al–4V coatings
2003
Properties of heat-treated calcium phosphate coatings deposited by high-velocity oxy-fuel (HVOF) spray
2002
Hydroxyapatite–zirconia composite coatings via the plasma spraying process
1999
Injection moulding of hydroxyapatite composites
1997
Ti- 6Al-4V/hydroxyapatite composite coatings prepared by thermal spray techniques
1997
Hydroxyapatite-Chitosan Hybrid Nano-Materials
2005
RF Induction Plasma Synthesized Calcium Phosphate Nanoparticles
2006
Preparation and characterization of nano-sized hydroxyapatite powders produced in a radio frequency (rf) thermal plasma
2004
Characterization of hydroxyapatite/nano-zirconia composite coatings deposited by high velocity oxy-fuel (HVOF) spray process
2003
Characterisation of hydroxyapatite- and bioglass-316L fibre composites prepared by spark plasma sintering
2004
The thermal spray processing of HA powders and coatings
1997
The production and characterization of hydroxyapatite (HA) powders
1999
High-pressure plasma spraying of hydroxyapatite powders
2002
Adhesive and bending failure of thermal sprayed hydroxyapatite coatings: Effect of nanostructures at interface and crack propagation phenomenon during bending
2006
RF plasma processing of ultra-fine hydroxyaptite powders
2001
Conductometric Study of Precursor Compound Formation during Wet-Chemical Synthesis of Nanocrystalline Hydroxyapatite
2006
Effect of the powders’ melting state on the properties of HVOF sprayed hydroxyapatite coatings
2000
Tensile properties and microstructural analysis of spheroidized hydroxyapatite–poly (etheretherketone) biocomposites
2003
Effect of characteristics of Y2O3/ZrO2 powders on fabrication of anode-supported solid oxide fuel cells
2003
Apparent Solubility of Hydroxyapatite in Aqueous Medium and Its Influence on the Morphology of Nanocrystallites with Precipitation Temperature
2006
Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites
2002
Characterization of thermal sprayed hydroxyapatite powders and coatings
1994
Phase transformations in plasma sprayed hydroxyapatite coatings
1999