Citation Impact
Citing Papers
The relationship between indentation and uniaxial creep in amorphous selenium
1995
Precipitation and Hardening in Magnesium Alloys
2012 Standout
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying
2011
Magnesium and its alloys as orthopedic biomaterials: A review
2005 Standout
Bio-Adaption between Magnesium Alloy Stent and the Blood Vessel: A Review
2015
Li-alloy based anode materials for Li secondary batteries
2010 Standout
Application of cellulose acetate to the selective adsorption and recovery of Au(III)
2014 Standout
Influence of boron nitride on reinforcement to improve high temperature oxidation resistance of titanium
2019
Corrosion inhibition of powder metallurgy Mg by fluoride treatments☆
2009
Adsorptive recovery of Au3+ from aqueous solutions using bayberry tannin-immobilized mesoporous silica
2010
Development of new metallic alloys for biomedical applications
2012 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser material processing
2011 Standout
Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin
2010
Advances in lead-free electronics soldering
2001 Standout
A critical review of high entropy alloys and related concepts
2016 Standout
Adsorption of dyes and heavy metal ions by chitosan composites: A review
2010 Standout
High-temperature oxidation behavior of laser-surface-alloyed incoloy-800H with Al
1997
Research of phase transformation on Fe–8.7Al–28.3Mn–1C–5.5Cr alloy
2009
Investigation of stress exponent in the power-law creep of Pb–Sb alloys
2004
Thermal stability of Mg2Si0.4Sn0.6 in inert gases and atomic-layer-deposited Al2O3 thin film as a protective coating
2016 StandoutNobel
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
2011 Standout
Adsorption of Au(III) from aqueous solution using cotton fiber/chitosan composite adsorbents
2009
Hydrogen energy systems: A critical review of technologies, applications, trends and challenges
2021 Standout
Capturing Magnesium Ions via Microfluidic Hydrogel Microspheres for Promoting Cancellous Bone Regeneration
2021 Standout
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Mechanical Alloying of Metal–Organic Frameworks
2017 StandoutNobel
Microstructure and mechanical properties of Mg–9RY–4Cu alloy with long period stacking ordered phase
2013
Thermodynamic description of the Mg–Nd–Zn ternary system
2010
Fabrication of oxidation-resistant β-FeSi2 film on Mg2Si by RF magnetron-sputtering deposition
2009
Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles
2008 Standout
Laser processing of materials
2003 Standout
A review on the current progress of metal hydrides material for solid-state hydrogen storage applications
2016 Standout
Corrosion behavior of magnesium and magnesium–hydroxyapatite composite fabricated by friction stir processing in Dulbecco’s phosphate buffered saline
2016
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
2010 Standout
Electroless nickel, alloy, composite and nano coatings – A critical review
2013 Standout
A review on hydrogen production and utilization: Challenges and opportunities
2021 Standout
Metal-based reactive nanomaterials
2008 Standout
Magnesium-based nanocomposites: Lightweight materials of the future
2015
The structure of long period stacking/order Mg–Zn–RE phases with extended non-stoichiometry ranges
2011
Deformation behavior of dilute SnBi(0.5 to 6 at. pct) solid solutions
1999
Friction Stir Processing Technology: A Review
2008 Standout
Effect of Al content on porous Ni–Al alloys
2011
Mechanical alloying and milling
2001 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Microwave synthesis and characterization of metastable (Al/Ti) and hybrid (Al/Ti+SiC) composites
2006
Nanostructured materials: basic concepts and microstructure
2000 Standout
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
2004 Standout
Refractory high-entropy alloys
2010 Standout
Biodegradable metals
2014 Standout
Development and exploration of refractory high entropy alloys—A review
2018 Standout
The thermal stability of nonocrystalline FeSiNb prepared by mechanical alloying
1993
Materials Design and Discovery with High-Throughput Density Functional Theory: The Open Quantum Materials Database (OQMD)
2013 Standout
Electrocatalysis developments for hydrogen evolution reaction in alkaline solutions – A Review
2014 Standout
A ternary linear compound T2 and its phase equilibrium relationships in Mg–Zn–Nd system at 400 °C
2009
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Corrosion behaviour of silicon–carbide-particle reinforced AZ92 magnesium alloy
2009
Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating
2004
Hydrogen storage technologies for stationary and mobile applications: Review, analysis and perspectives
2021
Microstructures and properties of high-entropy alloys
2013 Standout
Titanium particulate reinforced AZ31 magnesium matrix composites with improved ductility prepared using friction stir processing
2019
Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
2007
Inter-dependence of grain growth, Nb segregation, and chemical ordering in FeSiNb nanocrystals
1994
Corrosion behaviour of a magnesium matrix composite with a silicate plasma electrolytic oxidation coating
2010
In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450°C
2015
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Microstructure characterization of Alx CoCrCuFeNi high-entropy alloy system with multiprincipal elements
2005 Standout
Protective coatings on magnesium and its alloys — a critical review
2002 Standout
Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes
2004 Standout
Microstructure evolution and mechanical properties of Mg–Nd–Y alloy in different friction stir processing conditions
2015
Hydrogen storage and delivery: Review of the state of the art technologies and risk and reliability analysis
2019 Standout
Hydrogen energy, economy and storage: Review and recommendation
2019 Standout
Tin-Iron Based Nano-Materials as Anodes for Li-Ion Batteries
2011 StandoutNobel
High-entropy alloys
2019 Standout
Mechanical Alloying of Metal–Organic Frameworks
2017 StandoutNobel
Effective joining of Mg/Ti dissimilar alloys by friction stir lap welding
2019
EFFECT OF EXTRUSION PARAMETERS ON STRUCTURE AND PROPERTIES OF 2124 ALUMINUM ALLOY MATRIX COMPOSITES
2001
Modeling of ceramic particles filled polymer–matrix nanocomposites
2005
Works of P. Adeva being referenced
Extrudability of PM 2124/SiCp aluminium matrix composite
1997
Influence of texture on the mechanical properties of commercially pure magnesium prepared by powder metallurgy
2007
Mechanical properties of a Mg–10 (vol.%)Ti composite
2003
Microstructural and mechanical characterisation of WE54–SiC composites
2010
Effect of the LPSO volume fraction on the microstructure and mechanical properties of Mg–Y2X –Zn X alloys
2011
The role of microstructure on oxidation of Ni-Cr-Al base alloys at 1023 and 1123 K in air
1990
Influence of Chromium Additions on the Oxidation Resistance of an Austenitic Fe–30Mn–5Al Alloy
2002
Oxidation behaviour of an austenitic Fe–30Mn–5Al–0.5C alloy
2002
Processing of residual gold (III) solutions via ion exchange
2005
Microstructure and high temperature mechanical properties of tin
1995
Corrosion behaviour of Mg–Zn–Y–Mischmetal alloys in phosphate buffer saline solution
2012
Effect of the extrusion texture on the mechanical behaviour of Mg–SiCp composites
2004
Microstructural characterization of an extruded Mg–Ni–Y–RE alloy processed by equal channel angular extrusion
2008
High-strength extruded Mg96Ni2Y1RE1 alloy exhibiting superplastic behaviour
2007
Influence of Powder Particle Size on the Oxidation Behavior of a PM Ni3Al Alloy
1998
Effect of extrusion temperature on superplasticity of PM-WE54
2006
Ball milling mechanical alloying in the Fe100−xSix system
1991
Effect of mischmetal substitution on the glass-forming ability of Mg–Ni–La bulk metallic glasses
2009
High temperature mechanical properties of Mg–Y2O3 composite: Competition between texture and reinforcement contributions
2006
The evolution of internal strain in Mg–Y–Zn alloys with a long period stacking ordered structure
2011
Synthesis of Mg2Si Powder by Mechanical Alloying and Its Consolidation
1996
Microstructure and mechanical properties of Ni3Al base alloy reinforced with Cr particles produced by powder metallurgy
2005
Thermodynamics and reaction pathways of hydrogen sorption in Mg6(Pd,TM) (TM = Ag, Cu and Ni) pseudo-binary compounds
2014
Effect of extrusion temperature on the microstructure and plastic deformation of PM-AZ92
2006
Effect of refractory elements on the evolution of the NiAl intermetallic phase in NiCrAl alloys
1990
Texture of magnesium alloy films growth by physical vapour deposition (PVD)
2000
Oxidation behaviour of Al-alloyed ZrSi2 at 700°C
2000
Indentation creep of lead and lead-copper alloys
1991