Citation Impact
Citing Papers
Microstructure and Electrochemical Properties of PVD TiN, (Ti, Al) N-Coated Ti-Based Bulk Metallic Glasses
2009
Residual stress. Part 1 – Measurement techniques
2001 Standout
Atmospheric pressure plasmas: A review
2005 Standout
Effects of residual stress on the performance of plasma sprayed functionally graded ZrO2/NiCoCrAlY coatings
2000
Historical developments and new trends in tribological and solid lubricant coatings
2003
A critical review of high entropy alloys and related concepts
2016 Standout
Mechanical and tribological properties of multi-element (AlCrTaTiZr)N coatings
2008
Nanostructure and hardness of titanium aluminum nitride prepared by plasma enhanced chemical vapor deposition
2001
Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning
1999
Characterization of zirconium nitride coatings deposited by cathodic arc sputtering
1998 StandoutNobel
Machining induced surface integrity in titanium and nickel alloys: A review
2010 Standout
Six cases of reliability study of Pb-free solder joints in electronic packaging technology
2002 Standout
Recent progress in the superhard nanocrystalline composites: towards their industrialization and understanding of the origin of the superhardness
1998
Laser treatment and PVD TiN coating of Ti–6Al–4V alloy
2000
A simple model for the formation of compressive stress in thin films by ion bombardment
1993
Preparation and characterization of AlCrTaTiZr multi-element nitride coatings
2006
Cemented carbide microstructures: a review
2018 Standout
Tin–lead (SnPb) solder reaction in flip chip technology
2001 Standout
Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
2009
A new class of high performance PVD coatings for carbide cutting tools
2001
Recent development and application products of bulk glassy alloys
2011 Standout
Nanocomposites: synthesis, structure, properties and new application opportunities
2009 Standout
Diamond-like amorphous carbon
2002 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
2011 Standout
Surfaces in Precision Engineering, Microengineering and Nanotechnology
2003
Structure, mechanical and tribological properties of Ti–B–N and Ti–Al–B–N multiphase thin films produced by electron-beam evaporation
1998
Prediction of high-entropy stabilized solid-solution in multi-component alloys
2012 Standout
Dry Machining and Minimum Quantity Lubrication
2004 Standout
Environmental friendly cutting fluids and cooling techniques in machining: a review
2014 Standout
<I>Quo Vadis</I> Thermal Spraying?
2001
Manufacturing and measurement of freeform optics
2013 Standout
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
Laser processing of materials
2003 Standout
Advanced coated ceramic tools for machining superalloys
1997
Structure and properties of Ti-B-N coatings
1994
An overview of the machinability of aeroengine alloys
2003 Standout
Al capping layers for nondestructive x-ray photoelectron spectroscopy analyses of transition-metal nitride thin films
2015
Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work
1996
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
2012 Standout
Architecture of PVD coatings for metalcutting applications: A review
2014
Nitride films deposited from an equimolar Al–Cr–Mo–Si–Ti alloy target by reactive direct current magnetron sputtering
2008
Wear behaviour of carbon-containing tungsten coatings prepared by reactive magnetron sputtering
1999
Evaluation of some titanium-based ceramic coatings on high speed steel cutting tools
1991
Evolution of conventional hard coatings for its use on cutting tools
2016
The atmospheric-pressure plasma jet: a review and comparison to other plasma sources
1998 Standout
In-situ observation of self-cleansing phenomena during ultra-high vacuum anneal of transition metal nitride thin films: Prospects for non-destructive photoelectron spectroscopy
2016
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
Evolution of structure and properties of multi-component (AlCrTaTiZr)Ox films
2009
Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel
2020
Influence of substrate bias, deposition temperature and post-deposition annealing on the structure and properties of multi-principal-component (AlCrMoSiTi)N coatings
2007
Deposition and characterization of multi-principal-element (CuSiTiYZr)C coatings
2013
X-ray photoelectron spectroscopy: Towards reliable binding energy referencing
2019 Standout
Characterization of Ti(NxOy) coatings produced by the arc ion plating method
1998
Structure–performance relations in nanocomposite coatings
2001
Properties of TiN, ZrN and ZrTiN coatings prepared by cathodic arc evaporation
1993
Adhesion Evaluation of TiN and (Ti, Al)N Coatings on Titanium 6Al-4V
1995 StandoutNobel
Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering
1999
Nanocrystalline hard coatings within the quasi-binary system TiN–TiB2
1998
Large-scale fabrication of hard superlattice thin films by combined steered arc evaporation and unbalanced magnetron sputtering
1997
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
2020 Standout
Force measurements with the atomic force microscope: Technique, interpretation and applications
2005 Standout
Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel
2005
Thermodynamic study of phase equilibria in the Pb-Sn-Sb system
1995
Nanostructured materials: basic concepts and microstructure
2000 Standout
The Thermo-Calc databank system
1985 Standout
Frictional Characteristics of Atomically Thin Sheets
2010 StandoutScience
On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour
2000 Standout
Tool Life and Surface Integrity When Machining Inconel 718 With PVD- and CVD-Coated Tools
1999
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Adhesion measurement of zirconium nitride and amorphous silicon carbide coatings to nickel and titanium alloys
1999 StandoutNobel
The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel
2005
Performance of PVD Coated Carbide Inserts When Machining a Nimonic (C-263) Alloy at High Speed Conditions
2000
Self-consistent modelling of X-ray photoelectron spectra from air-exposed polycrystalline TiN thin films
2016
Optimization of arc evaporated (Ti,Al)N film composition for cutting tool applications
1992
Thermal stability of arc evaporated high aluminum-content Ti1−xAlxN thin films
2002
Three-dimensional exact solution for the vibration of functionally graded rectangular plates
2003 Standout
The search for novel, superhard materials
1999
Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel
2005
Key improvements in the machining of difficult-to-cut aerospace superalloys
2005 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Effects of substrate bias on the structure and mechanical properties of (Al1.5CrNb0.5Si0.5Ti)Nx coatings
2012
Venting temperature determines surface chemistry of magnetron sputtered TiN films
2016
Titanium boron nitride coatings of very high hardness
1994
Development of novel coating technology by vacuum arc with rotating cathodes for industrial production of nc-(Al1?xTix)N/a-Si3N4 superhard nanocomposite coatings for dry, hard machining
2004
The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings
2001
Supertough wear-resistant coatings with ‘chameleon’ surface adaptation
2000
Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass
2007
Different approaches to superhard coatings and nanocomposites
2004
Investigation of superlattice coatings deposited by a combined steered arc evaporation and unbalanced magnetron sputtering technique
1995
Microstructural evolution during film growth
2003 Standout
Present and possible future applications of superhard nanocomposite coatings
2000
Structure and properties of two Al–Cr–Nb–Si–Ti high-entropy nitride coatings
2013
Plasma spray: Study of the coating generation
1996
Alloying effects on elastic properties of TiN-based nitrides
2003
Unintentional carbide formation evidenced during high-vacuum magnetron sputtering of transition metal nitride thin films
2016
Modeling hardness of polycrystalline materials and bulk metallic glasses
2011 Standout
Investigation of residual stress generation during thermal spraying by continuous curvature measurement
1994
Global energy consumption due to friction in passenger cars
2011 Standout
Deformation of electrodeposited nanocrystalline nickel
2003 Standout
Core-level spectra and binding energies of transition metal nitrides by non-destructive x-ray photoelectron spectroscopy through capping layers
2016
T thermochemical assessment of liquid-solid equilibria in nickel-rich NiSiB alloys
1984
The effect of minimum quantity lubrication under different parameters in the turning of AA7075 and AA2024 aluminium alloys
2015
Structural engineering of polyurethane coatings for high performance applications
2007 Standout
The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD
1999
Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering
2010
Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum–silicon alloys
2002
Characterisation and tribological evaluation of nitrogen-containing molybdenum–copper PVD metallic nanocomposite films
2004
Works of O. Knotek being referenced
Process and advantage of multicomponent and multilayer PVD coatings
1993
Superhard Ti-B-C-N coatings
1990
On structure and properties of sputtered Ti and Al based hard compound films
1986
On the origin of compressive stress in PVD coatings — an explicative model
1991
Properties of arc-evaporated CrN and (Cr, Al)N coatings
1991
Multicomponent and multilayer physically vapour deposited coatings for cutting tools
1992
Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum
1987
Calculation of residual thermal stress in plasma-sprayed coatings
1990
(TiCr)N coatings deposited by cathodic vacuum arc evaporation
1995
Das Dreistoffsystem Nickel-Bor-Silicium
1975
Wear resistance of arc-evaporated and magnetron-sputtered coatings on cemented carbides
1989
PVD hard coated reamers in lubricant-free cutting
1999
The structure and composition of TiZrN, TiAlZrN and TiAlVN coatings
1988
Monte Carlo simulation of the lamellar structure of thermally sprayed coatings
1987
Abrasive wear resistance and cutting performance of complex PVD coatings
1994
Investigation of the mechanical and structural properties of Ti–Hf–C–N arc PVD coatings
1999
Structure and properties of magnetron-sputteredTiVN coatings
1990
Ceramic cathodes for arc-physical vapour deposition: development and application
1991
On the properties of physically vapour-deposited Ti-Al-V-N coatings
1987
Ti(C,N) coatings using the arc process
1991
On reactively sputtered Ti-Al-V carbonitrides
1988
On spinodal decomposition in magnetron-sputtered (Ti,Zr) nitride and carbide thin films
1989
The influence of physical properties and spraying parameters on the creation of residual thermal stresses during the spraying process
1990
A new technique for testing the impact load of thin films: the coating impact test
1992
Comparison of abrasion model test results and machining tests with PVD-coated indexable inserts
1993
Magnetron-sputtered superhard coatings within the system TiBCN
1990
Determination of mechanical properties of electron beam-physical vapor deposition-thermal barrier coatings (EB-PVD-TBCs) by means of nanoindentation and impact testing
2002
On the structure of (Ti, Al)N-PVD coatings
1987
Substrate- and interface-related influences on the performance of arc-physical-vapour-deposition-coated cemented carbides in interrupted-cut machining
1992
Korrosionseigenschaften dünner Schichten im System TiBN
1992
Investigations on hard coated reamers in different lubricant free cutting operations
1997
Superstoichiometric PVD carbide coatings
1996