Citation Impact
Citing Papers
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
An analytical model for the heat generation in friction stir welding
2003 Standout
The use of environmental scanning electron microscopy for imaging wet and insulating materials
2003
Serial Block-Face Scanning Electron Microscopy to Reconstruct Three-Dimensional Tissue Nanostructure
2004 Standout
On the capability of in-situ exposure in an environmental scanning electron microscope for investigating the atmospheric corrosion of magnesium
2015
3D printing of high-strength aluminium alloys
2017 StandoutNature
Laser material processing
2011 Standout
Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds
2009
SVM-DS fusion based soft fault detection and diagnosis in solar water heaters
2018 Standout
Recent developments in stainless steels
2009 Standout
Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper
2005
Microstructural aspects in Al–Cu dissimilar joining by FSW
2015
Understanding grain refinement in aluminium welding
2015
Modification of hypoeutectic Al–Si alloys with scandium
2008
An active corrosion mechanism for metal dusting on 304L stainless steel
2002
The morphology and crystallography of lath martensite in Fe-C alloys
2003 Standout
Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6
2007
The strength of friction stir welded and friction stir processed aluminium alloys
2007
Application of cast Al–Si alloys in internal combustion engine components
2014 Standout
Precipitation sequence in friction stir weld of 6063 aluminum during aging
1999
Pulsed Nd-YAG laser welding of A SiC particulate reinforced aluminium alloy composite
1997
Phase-Field Modeling of Microstructure Evolution in Electron Beam Additive Manufacturing
2015
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
PHYSICAL METALLURGY OF STEELS
1996
Additivity and isokinetic behaviour in relation to diffusion controlled growth
2000
Initiation and growth mechanisms for weld solidification cracking
2013
Influence of Sc modification on the fluidity of an A356 aluminum alloy
2009
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Laser processing of materials
2003 Standout
Dissimilar friction stir welds in AA5083–AA6082: The effect of process parameters on residual stress
2006
Microstructural investigation of friction stir welded 7050-T651 aluminium
2003 Standout
Effect of Carbon Content on Cracking Phenomenon Occurring during Cold Rolling of Three Light-Weight Steel Plates
2010
On the coupling between precipitation and plastic deformation in relation with friction stir welding of AA2024 T3 aluminium alloy
2006
Thermal modelling of laser welding and related processes: a literature review
2004
Modeling of fundamental phenomena in welds
1995
Numerical analysis of the weldability of superalloys
2001
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Martensite in steel: strength and structure
1999 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review
2015 Standout
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
A process model for friction stir welding of age hardening aluminum alloys
2001
Modelling of non-isothermal transformations in alloys containing a particle distribution
2000
Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063
2002
Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments
2003
Dissimilar friction stir welds in AA5083-AA6082. Part II: Process parameter effects on microstructure
2006
Friction stir welding and processing
2005 Standout
Scandium in aluminium alloys
2005
Modelling of residual stresses and property distributions in friction stir welds of aluminium alloy 6061-T6
2007
Microstructural modelling in metals processing
2002
Quantitative evaluation of softened regions in weld heat-affected zones of 6061-T6 aluminum alloy—Characterizing of the laser beam welding process
1999
Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures
2000
Solidification, segregation, and banding in carbon and alloy steels
2003 Standout
Modelling of friction stir welding of 7xxx aluminium alloys
2007
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Friction stir welding of aluminium alloys
2009 Standout
Impact of structure and flow-path on in situ synthesis of AlN: Dynamic microstructural evolution of Al-AlN-Si materials
2018
Morphological and Microstructural Aspects of Metal Dusting on 304L Stainless Steel with Different Surface Treatments
2004
Microstructural modelling in friction stir welding of 2000 series aluminium alloys
2005
Microstructural evolution of 6063 aluminum during friction-stir welding
1999
In Situ Investigation of the Initial Stages of KCl-Induced Corrosion of a Chromia-Forming Steel at 450°C Using an Environmental Scanning Electron Microscope
2015
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450°C
2015
On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
2014
Residual stress and its role in failure
2007 Standout
Correlation of Microstructure and Cracking Phenomenon Occurring during Hot Rolling of Lightweight Steel Plates
2009
Precipitation microstructures in an AA6056 aluminium alloy after friction stir welding: Characterisation and modelling
2008
Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
2012 Standout
Mechanical and thermal modelling of Friction Stir Welding
2005
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Modelling of heterogeneous precipitate distribution evolution during friction stir welding process
2006
Physical processes in fusion welding
1995
Nano-sized carbon filament formation during metal dusting of stainless steel
2003
Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum
2001
A model for the electrical conductivity of peak-aged and overaged Al-Zn-Mg-Cu alloys
2003
‘In-situ’ weld-alloying/laser beam welding of SiCp/6061Al MMC
2000
Works of Ø. Grong being referenced
Modelling of microstructure and property distribution within industrial nodular graphite iron casting
2003
Process model for welding of Al–Mg–Si extrusions<BR> Part 1: Precipitate stability
1997
Additivity and isokinetic behaviour in relation to particle dissolution
1998
Process modelling applied to 6082-T6 aluminium weldments—II. Applications of model
1991
A process model for the microstructure evolution in ductile cast iron: Part I. the model
1999
Coke formation in metal dusting experiments
1999
Overview No. 124 Modelling of precipitation reactions in industrial processing
1997
The origin of transformation textures in steel weld metals containing acicular ferrite
1991
A process model for the heat-affected zone microstructure evolution in duplex stainless steel weldments: Part II. Application to electron beam welding
2000
Modelling of the microstructure and strength evolution in Al–Mg–Si alloys during multistage thermal processing
2004
A process model for the microstructure evolution in ductile cast iron: Part II. Applications of the model
1999
HAZ grain growth mechanisms in welding of low carbon microalloyed steels
1986
Effect of scandium and titanium–boron on grain refinement and hot cracking of aluminium alloy 7108
1999
A Model for Predicting Weld Metal Grain Refinement in G-V Space
1999
A process model for friction welding of AlMgSi alloys and AlSiC metal matrix composites—I. Haz temperature and strain rate distribution
1994
A process model for the heat-affected zone microstructure evolution in Al-Zn-Mg weldments
1999
Mechanisms of inclusion formation in Al−Ti−Si−Mn deoxidized steel weld metals
1989
Modelling of grain boundary liquation in Al–Zn–Mg weldments
1999
Prediction of penetration depths during electron beam welding
1999
Process model for welding of Al–Mg–Si extrusions Part 1: Precipitate stability
1997
A Model for the Graphite Formation in Ductile Cast Iron: Part I. Inoculation Mechanisms
1993
A process model for the heat-affected zone microstructure evolution in duplex stainless steel weldments: Part I. the model
1999
Analytical modelling of equiaxed solidification
1998
Dimensionless maps for heat flow analyses in fusion welding
1990
High‐temperature oxidation of nickel and chromium studied with an in‐situ environmental scanning electron microscope
2001
High-Temperature Oxidation of Iron and the Decay of Wüstite Studied with in situ ESEM
2002