Citation Impact
Citing Papers
Gwyddion: an open-source software for SPM data analysis
2011 Standout
Bone grafts and biomaterials substitutes for bone defect repair: A review
2017 Standout
Predictive value of normal sperm morphology: a structured literature review
1998
Comparison between a silorane-based composite and methacrylate-based composites: Shrinkage characteristics, thermal properties, gel point and vitrification point
2012
Longevity of direct resin composite restorations in posterior teeth: a review
2003
Modulated photoactivation methods: Influence on contraction stress, degree of conversion and push-out bond strength of composite restoratives
2006
Contraction stress and physical properties development of a resin-based composite irradiated using modulated curing methods at two C-factor levels
2007
A method for improving the light intensity distribution in dental light-curing units
2011
In vitro retentive strength of zirconium oxide ceramic crowns using different luting agents
2005
Effects of caffeine on human health
2003 Standout
Tetracalcium phosphate: Synthesis, properties and biomedical applications
2010
α-Tricalcium phosphate: Synthesis, properties and biomedical applications
2011
Current ceramic materials and systems with clinical recommendations: A systematic review
2007 Standout
World Health Organization reference values for human semen characteristics*‡
2009 Standout
The bleaching of teeth: A review of the literature
2006 Standout
Chemical aspects of self-etching enamel–dentin adhesives: A systematic review
2005 Standout
Polymerisation characteristics of resin composites polymerised with different curing units
2004
State-of-the-art: Dental photocuring—A review
2010
Resin-ceramic bonding: A review of the literature
2003 Standout
Calcium phosphate-based cements: clinical needs and recent progress
2012
Resin composite—State of the art
2010 Standout
Is the soft-start polymerisation concept still relevant for modern curing units?
2009
Hygroscopic and hydrolytic effects in dental polymer networks
2005 Standout
The efficacy of posterior three-unit zirconium-oxide–based ceramic fixed partial dental prostheses: A prospective clinical pilot study
2006 Standout
Recurrent implantation failure: definition and management
2013 Standout
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Reduction of Polymerization Shrinkage Stress and Marginal Microleakage Using Soft‐Start Polymerization
2003
Human sperm morphometry and smoking, caffeine, and alcohol consumption
1997
II. The effect of p-nonylphenol on the fertility potential of male rats after gestational, lactational and direct exposure
1999
Sperm Chromatin Structure Assay: Its Clinical Use for Detecting Sperm DNA Fragmentation in Male Infertility and Comparisons With Other Techniques
2002
Deep eutectic solvents: syntheses, properties and applications
2012 Standout
Color stability of resin matrix restorative materials as a function of the method of light activation
2004
Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans
2006 Standout
Pulpal temperature rise during light‐activated bleaching
2004
Insufficient cure under the condition of high irradiance and short irradiation time
2008
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Placing Dental Composites—A Stressful Experience
2008
Polymerization shrinkage and contraction stress of dental resin composites
2005 Standout
Softening and elution of monomers in ethanol
2009
Bonding effectiveness of adhesive luting agents to enamel and dentin
2006
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
How much do resin-based dental materials release? A meta-analytical approach
2011
Sperm chromatin structure assay parameters as predictors of failed pregnancy following assisted reproductive techniques
2000
Influence of Curing Method and Storage Condition on Microhardness of Dual-cure Resin Cements
2005
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Temperature rise induced by various light curing units through human dentin
2009
Relationship between bond-strength tests and clinical outcomes
2009 Standout
Influence of curing protocol on selected properties of light-curing polymers: Degree of conversion, volume contraction, elastic modulus, and glass transition temperature
2009
Polymerization of resin composite restorative materials: exposure reciprocity
2003
Thermal cycling procedures for laboratory testing of dental restorations
1999 Standout
Fracture Resistance and Gap Formation of MOD Restorations: Influence of Restorative Technique, Bevel Preparation and Water Storage
2008
Dental adhesion review: Aging and stability of the bonded interface
2007 Standout
Physical Properties of Different Composites
2004
Self-adhesive resin cements - chemistry, properties and clinical considerations
2010 Standout
Effect of various visible light photoinitiators on the polymerization and color of light-activated resins
2009
Nanoscale hydroxyapatite particles for bone tissue engineering
2011 Standout
Dental luting agents: A review of the current literature
1998 Standout
In vitro cuspal deflection and microleakage of maxillary premolars restored with novel low-shrink dental composites
2004
Use of near-IR to monitor the influence of external heating on dental composite photopolymerization
2004
Irradiance Uniformity and Distribution from Dental Light Curing Units
2010
Molar extinction coefficients and the photon absorption efficiency of dental photoinitiators and light curing units
2005
Luting of ceramic inlays in vitro: Marginal quality of self-etch and etch-and-rinse adhesives versus self-etch cements
2007
Longevity of posterior composite restorations: Not only a matter of materials
2011 Standout
The reliability of standardized flexure strength testing procedures for a light-activated resin-based composite
2005
Evidence for decreasing quality of semen during past 50 years.
1992 Standout
Recent advances in ionic liquid catalysis
2011
A review of electrolyte materials and compositions for electrochemical supercapacitors
2015 Standout
Ionic liquids and catalysis: Recent progress from knowledge to applications
2009
Alternatives in Polymerization Contraction Stress Management
2004
Structure and Nanostructure in Ionic Liquids
2015 Standout
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
2011 Standout
EDC-2: The Endocrine Society's Second Scientific Statement on Endocrine-Disrupting Chemicals
2015 Standout
Modeling and Control of Piezo-Actuated Nanopositioning Stages: A Survey
2014 Standout
Calcium orthophosphate cements for biomedical application
2008
Effects of Treatment and Storage Conditions on Ceramic/Composite Bond Strength
1995
Asymmetric Hydrogenation of Quinolines Catalyzed by Iridium Complexes of Monodentate BINOL‐Derived Phosphoramidites
2008 StandoutNobel
Plasminogen Activators, Tissue Degradation, and Cancer
1985 Standout
Design of a large measurement-volume metrological atomic force microscope (AFM)
2009
Manufacturing and measurement of freeform optics
2013 Standout
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive.
2003
Advances in the Chemistry of Tetrahydroquinolines
2011 Standout
Novel control scheme for a high-speed metrological scanning probe microscope
2011
The Kuramoto model: A simple paradigm for synchronization phenomena
2005 Standout
An Algorithmic Introduction to Numerical Simulation of Stochastic Differential Equations
2001 Standout
A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results
2005 Standout
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Tactile 3D microprobe system with exchangeable styli
2011
Asymmetric hydrogenation of quinolines with recyclable and air-stable iridium catalyst systems
2007
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Molecular Toxicology of Substances Released from Resin–Based Dental Restorative Materials
2009
Human skin proteases
1976
External quality control in the andrology laboratory: an experimental multicenter trial.
1990
Detailed kinetic study of cumene isopropylation in a liquid–liquid biphasic system using acidic chloroaluminate ionic liquids
2008
Allyl-functionalized ionic liquids as electrolytes for electric double-layer capacitors
2010
An introduction to numerical methods for stochastic differential equations
1999
Review of the mathematical foundations of data fusion techniques in surface metrology
2015
Calcium phosphates in biomedical applications: materials for the future?
2015 Standout
Calcium Orthophosphate Cements and Concretes
2009
Works of Norbert Hofmann being referenced
The effect of cervical mucus on measurable feulgen DNA content of human spermatozoa
1981
Effect of irradiation type (LED or QTH) on photo‐activated composite shrinkage strain kinetics, temperature rise, and hardness
2002
Comparative studies on various modes of classification of morphology of sperm heads and results in in vitro fertilization - a preliminary report
2009
Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus, and hardness of photoactivated resin composites
2000
Antimicrobial properties of nanocrystalline tetracalcium phosphate cements
2007
Effect of storage media on microleakage of five dentin bonding agents
1993
The influence of plasma arc vs. halogen standard or soft-start irradiation on polymerization shrinkage kinetics of polymer matrix composites
2003
Comparison of photo-activation versus chemical or dual-curing of resin-based luting cements regarding flexural strength, modulus and surface hardness
2001
The effect of glass ionomer cement or composite resin bases on restoration of cuspal stiffness of endodontically treated premolars in vitro
1998
Use of aniline blue to assess chromatin condensation in morphologically normal spermatozoa in normal and infertile men*
1991
Elution of leachable components from resin composites after plasma arc vs. standard or soft-start halogen light irradiation
2002
Nanomeasuring and nanopositioning engineering
2010
Die Analyse von Spermaproben mit Hilfe impulscytophotometrischer DNS-Bestimmungen*
2009
Continuous, Ionic Liquid‐Catalysed Propylation of Toluene in a Liquid‐Liquid Biphasic Reaction Mode using a Loop Reactor Concept
2007
Comparison of photo‐activation versus chemical or dual‐curing of resin‐based luting cements regarding flexural strength, modulus and surface hardness
2001
Enzyme histochemical studies on the pathological changes in human Sertoli cells.
1982
Nanopositioning and nanomeasuring machine for high accuracy measuring procedures of small features in large areas
2005
Metrological scanning probe microscope
2006
Stability of weak numerical schemes for stochastic differential equations
1995
[In vivo study of small class II composite fillings].
2001
Liquid‐Liquid Biphasic, Platinum‐Catalyzed Hydrosilylation of Allyl Chloride with Trichlorosilane using an Ionic Liquid Catalyst Phase in a Continuous Loop Reactor
2008
Die Proteolyse normaler und pathologisch ver�nderter Haut durch Endopeptidasen
1957
On quasi-Monte Carlo simulation of stochastic differential equations
1997
Development of the interferometrical scanning probe microscope
2006
Investigation of the metrological properties of a 3-D microprobe with optical detection system
2010
Effect of high intensity vs. soft-start halogen irradiation on light-cured resin-based composites. Part I. Temperature rise and polymerization shrinkage.
2003
Option Pricing Under Incompleteness and Stochastic Volatility
1992
Application of a positioning and measuring machine for metrological long-range scanning force microscopy
2005
Optimal approximation of stochastic differential equations by adaptive step-size control
1999
Influence of curing methods and materials on the marginal seal of class V composite restorations in vitro.
2003
Extrapolation Methods for the Weak Approximation of Ito Diffusions
1995
Effect of high intensity vs. soft-start halogen irradiation on light-cured resin-based composites. Part II: Hardness and solubility.
2004
Stability of weak numerical schemes for stochastic differential equations
1994
Okklusale RandschluBqualitat von Cerec^ -Inlays nach mehrmonatiger Tragedauer
1990