Citation Impact
Citing Papers
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Additive manufacturing: technology, applications and research needs
2013 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser material processing
2011 Standout
Recent developments in stainless steels
2009 Standout
In-situ fabrication of Al 3 Zr aluminide reinforced AA3003 alloy composite by friction stir processing
2017
Visible-light photoactivity of plasmonic silver supported on mesoporous TiO2 nanoparticles (Ag-MTN) for enhanced degradation of 2-chlorophenol: Limitation of Ag-Ti interaction
2016
Al–Ni intermetallic composites produced in situ by friction stir processing
2010
Low cycle fatigue behavior of ferritic Fe-24Cr-4Al alloy at high temperatures
1995
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification
2018
Reactive mechanism and mechanical properties of in-situ hybrid nano-composites fabricated from an Al–Fe2O3 system by friction stir processing
2017
Characterization on electron beam welds and parameters for AZ31B-F extrusive plates
2006
Cemented carbide microstructures: a review
2018 Standout
Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing
2010
In-situ aluminum matrix composite produced by friction stir processing using FE particles
2015
Microstructure and mechanical properties of laser-MIG hybrid welding of 1420 Al-Li alloy
2012
Hot deformation behavior of an aluminum-matrix hybrid nanocomposite fabricated by friction stir processing
2015
Low-cycle fatigue-induced martensitic transformation in SAF 2205 duplex stainless steel
2005
In situ formation of Al–Al3Ni composites on commercially pure aluminium by friction stir processing
2014
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Hydrogen-enhanced cracking of 2205 duplex stainless steel welds
2004
Nanocomposites: synthesis, structure, properties and new application opportunities
2009 Standout
Development of in situ composites via reactive friction stir processing of Ti–B4C system
2019
Characterization of Y2O3 particles reinforced AA6082 aluminum matrix composites produced using friction stir processing
2019
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
2009 Standout
On the correlation between indentation hardness and tensile strength in friction stir processed materials
2020
Fatigue limit and crack growth in ultra-fine grain metals produced by severe plastic deformation
2006
Effect of friction stir processing parameters on the microstructural and electrical properties of copper
2015
Laser processing of materials
2003 Standout
Mechanical properties of Fe30Mn10Al1C1Si alloy
1989
Influence of ceramic particulate type on microstructure and tensile strength of aluminum matrix composites produced using friction stir processing
2016
Friction Stir Processing of Al-TiB2 In Situ Composite: Effect on Particle Distribution, Microstructure and Properties
2015
Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC
2012
Producing of AZ91/SiC composite by friction stir processing (FSP)
2010
Cryogenic friction-stir processing of ultrafine-grained Al–Mg–TiO2 nanocomposites
2014
Towards heterogeneous AlxCoCrFeNi high entropy alloy via friction stir processing
2018
Characterization of molybdenum particles reinforced Al6082 aluminum matrix composites with improved ductility produced using friction stir processing
2017
Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing
2017
Development of stainless steel particulate reinforced AA6082 aluminum matrix composites with enhanced ductility using friction stir processing
2017
Friction Stir Processing Of Intermetallic particulate Reinforced Aluminum Matrix composite
2013
Strain Rate Sensitivity, Work Hardening, and Fracture Behavior of an Al-Mg TiO2 Nanocomposite Prepared by Friction Stir Processing
2014
Development of surface composite based on Mg–Al–Ni system on AZ31 magnesium alloy and evaluation of formation mechanism
2014
Experimental Investigation of Magnesium-Base Nanocomposite Produced by Friction Stir Processing: Effects of Particle Types and Number of Friction Stir Processing Passes
2011
Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles
2014
Reactive mechanism and mechanical properties of in situ composites fabricated from an Al–TiO2 system by friction stir processing
2012
Stretchable and Soft Electronics using Liquid Metals
2017 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Effect of multi-pass friction stir processing on microstructure and mechanical properties of Al3Ti/A356 composites
2015
Microstructure evolution and texture development in a friction stir-processed AISI D2 tool steel
2014
Reactive friction-stir processing of nanocomposites: Effects of thermal history on microstructure–mechanical property relationships
2017
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
2017
Hydrogel ionotronics
2018 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Aluminium based in-situ composite fabrication through friction stir processing: A review
2017
High-cycle fatigue properties of Al-based composites reinforced with in situ TiB2 and Al2O3 particulates
2004
Mechanical and Tribological Behaviour of Friction-Stir-Processed Al 6061 Aluminium Sheet Metal Reinforced with $${{\rm Al}_{2}{\rm O}_{3}/0.5\,{\rm Gr}}$$ Al 2 O 3 / 0.5 Gr Hybrid Surface Nanocomposite
2014
Investigation of Fe-rich fragments in aluminum-steel friction stir welds via simultaneous Transmission Kikuchi Diffraction and EDS
2016
Friction-stir processing of a cold sprayed AA7075 coating layer on the AZ31B substrate: Structural homogeneity, microstructures and hardness
2017
Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening
2017
Dependence of intergranular fatigue cracking on the interactions of persistent slip bands with grain boundaries
2003
Fabrication of Al/Al 2 Cu in situ nanocomposite via friction stir processing
2017
Friction-stir processing of an AA8026-TiB 2 -Al 2 O 3 hybrid nanocomposite: Microstructural developments and mechanical properties
2016
Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing
2014
Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing
2015
Influence of Tool Rotational Speed on the Formation of Friction Stir Processing Zone in Cast Zk60/SiCp Magnesium Alloy Surface Composites
2018
Wear performance of nano-Al2O3 particles and CNTs reinforced magnesium matrix composites by friction stir processing
2012
In-Situ Aluminothermal Reduction Synthesis of Ti3AlC2 Aluminium Composite by Friction Stir Processing
2016
Friction stir processing of an aluminum-magnesium alloy with pre-placing elemental titanium powder: In-situ formation of an Al3Ti-reinforced nanocomposite and materials characterization
2015
Effects of Processing Parameters on the Microstructures and Mechanical Properties of In Situ (Al3Ti + Al2O3)/Al Composites Fabricated by Hot Pressing and Subsequent Friction-Stir Processing
2014
Effect of Tool Shoulder Diameter on the Surface Hardness of Aluminum-Molybdenum Surface Composites Developed by Single and Double Groove Friction Stir Processing
2019
Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds
2010
Recent Advances in Stretchable and Transparent Electronic Materials
2016
Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing
2018
In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 system
2011
Influence of Ru additions on the corrosion behaviour of WC–Co cemented carbide alloys in sulphuric acid
2011
Fabrication of aluminum–alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing
2012
Wear properties of Al–Al2O3/TiB2 surface hybrid composite layer prepared by friction stir process
2015
Surface composites by friction stir processing: A review
2015
Nanocrystalline materials and coatings
2004
Tribological and mechanical behavior of particulate aluminum matrix composites
2014
The status, challenges, and future of additive manufacturing in engineering
2015 Standout
Laser beam machining—A review
2007 Standout
Magnesium and its alloys applications in automotive industry
2007 Standout
Friction stir welding of a P/M Al–Al2O3 nanocomposite: Microstructure and mechanical properties
2013
Soft Robotic Grippers
2018 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Friction stir processing of spark plasma sintered aluminum matrix composites with bimodal micro- and nano-sized reinforcing Al2O3 particles
2018
Friction stir welding of aluminium alloys
2009 Standout
Surface modifications of an aluminum-magnesium alloy through reactive stir friction processing with titanium oxide nanoparticles for enhanced sliding wear resistance
2016
Microstructure and mechanical properties of selective laser melted magnesium
2011
Cocatalysts for Selective Photoreduction of CO2into Solar Fuels
2019 Standout
Creep and low-cycle fatigue behavior of ferritic Fe-24Cr-4Al alloy in the dynamic strain aging regime: Effect of aluminum addition
1997
Microstructural evolution and mechanical properties of ultrafine grained Al3Ti/Al–5.5Cu composites produced via hot pressing and subsequent friction stir processing
2012
Friction stir processing of 316L stainless steel plate
2009
Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
2007
Twinning-induced plasticity (TWIP) steels
2017 Standout
Development of Al3Ti and Al3Zr intermetallic particulate reinforced aluminum alloy AA6061 in situ composites using friction stir processing
2014
Structural and mechanical properties of polymer nanocomposites
2006 Standout
Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing
2012
Fabrication and characterization of in-situ Al/Nb metal/intermetallic surface composite by friction stir processing
2017
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Properties of friction stir-processed Al 1100–NiTi composite
2006
Fabrication and characterization of magnesium matrix composite processed by combination of friction stir processing and high-energy ball milling
2016
Reactive friction stir processing of AA 5052–TiO2 nanocomposite: process–microstructure–mechanical characteristics
2014
Influence of friction stir processing on microstructure and tensile behavior of AA6061/Al3Zr cast aluminum matrix composites
2019
Effects of stored strain energy on restoration mechanisms and texture components in an aluminum–magnesium alloy prepared by friction stir processing
2015
Effects of post-annealing on the microstructure and mechanical properties of friction stir processed Al–Mg–TiO2 nanocomposites
2014
Microstructure and wear characterization of aluminum matrix composites reinforced with industrial waste fly ash particulates synthesized by friction stir processing
2016
The influence of aluminium content to the stacking fault energy in Fe-Mn-Al-C alloy system
1990
Microstructure and mechanical properties of fine-grained aluminum matrix composite reinforced with nitinol shape memory alloy particulates produced by underwater friction stir processing
2019
Friction Stir Processing of Copper-Coated SiC Particulate-Reinforced Aluminum Matrix Composite
2018
Structural engineering of polyurethane coatings for high performance applications
2007 Standout
Tensile deformation-induced martensitic transformation in AISI 304LN austenitic stainless steel
1994
In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing
2012
Additive manufacturing of metals
2016 Standout
Works of N.J. Ho being referenced
Nonstoichiometric Titanium Oxides via Pulsed Laser Ablation in Water
2010
Microstructural and mechanical characterization of laser-beam welding of a 8090 Al-Li thin sheet
1996
Ultrafine-grained Al–Al2Cu composite produced in situ by friction stir processing
2005
Solidification microstructure and creep rupture behaviour of electron beam welded austenitic Fe-28M-6Al-1C alloy
1997
The observation and analysis of the dislocation morphology of fatigue crack tips at steady state propagation rates subject to a single peak load
2001
Transmission electron microscopy studies of the dislocation microstructures in fatigued Fe-8.7Al-29.7Mn-1.04C alloy
1987
Formation of silver nanoparticles in silicon by metal vapor vacuum arc ion implantation
2012
Enhanced tensile plasticity in ultrafine-grained metallic composite fabricated by friction stir process
2008
Properties of electron-beam-welded and laser-welded austenitic Fe-28Mn-5Al-1C alloy
1993
The study of fatigue in polycrystalline copper under various strain amplitude at stage I: crack initiation and propagation
2000
Al–Al3Ti nanocomposites produced in situ by friction stir processing
2006
Transmission electron microscopy study of fatigue deformation in Fe-25Cr-4Al alloy
1987
Particle-reinforced aluminum matrix composites produced from powder mixtures via friction stir processing
2011
Corrosion behaviour of laser melted plasma sprayed coatings on 12% chromium dual phase steel
1997
Solute-enhanced tensile ductility of ultrafine-grained Al–Zn alloy fabricated by friction stir processing
2008
Microstructure and mechanical properties of Al–Fe in situ nanocomposite produced by friction stir processing
2008
Aluminum based in situ nanocomposite produced from Al–Mg–CuO powder mixture by using friction stir processing
2013
Formation of Al–Mo intermetallic particle-strengthened aluminum alloys by friction stir processing
2012
Laser surface alloying of ferritic Fe-40Cr alloy with ruthenium
1997
Transmission electron microscopy observations of strain-induced martensitic formation in fatigued Fe21Mn2.5Al alloy
1988
In-situ formation of Al2O3 nanoparticles during friction stir processing of AlSiO2 composite
2013
Electron-beam welding behavior in Mg-Al-based alloys
2002
Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processing
2006
Properties of electron beam welded SAF 2205 duplex stainless steel
1997
The microstructure and mechanical properties of an Al–CuO in-situ composite produced using friction stir processing
2012
Effect of Processing Parameters on Microstructure and Mechanical Properties of an Al-Al11Ce3-Al2O3 In-Situ Composite Produced by Friction Stir Processing
2009
Quantitative measurements of small scaled grain sliding in ultra-fine grained Al–Zn alloys produced by friction stir processing
2010
Cyclic deformation of duplex Fe-30Mn-10Al-0.4C alloy at room temperature
1988
The study of dislocation structures at fatigue crack tips in polycrystalline copper under various crack propagation rates at stage II: crack propagation
2000
Cyclic stress-strain behaviour of austenitic Fe-29.7Mn-8.7A1-1.04C alloy at room temperature
1987
Some aspects of the dislocation microstructures in fatigued FeCrAl alloys
1988