Standout Papers
Citation Impact
Citing Papers
Ultrafast laser processing of materials: from science to industry
2016 Standout
Marginal adaptation of a low-shrinkage silorane-based composite: 1-year randomized clinical trial
2010
Mechanical properties of resin-ceramic CAD/CAM restorative materials
2015 Standout
Mechanical properties of composite resin blocks for CAD/CAM
2014 Standout
Comparison between a silorane-based composite and methacrylate-based composites: Shrinkage characteristics, thermal properties, gel point and vitrification point
2012
Effect of filler particle size and morphology on force/work parameters for stickiness of unset resin-composites
2009
Effect of quaternary ammonium and silver nanoparticle-containing adhesives on dentin bond strength and dental plaque microcosm biofilms
2012
Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins
2002 Standout
Rheological properties of resin composites according to variations in monomer and filler composition
2005
Chipping fracture resistance of dental CAD/CAM restorative materials: Part I – Procedures and results
2014
Influence of light-curing procedures and photo-initiator/co-initiator composition on the degree of conversion of light-curing resins
2005
Modulated photoactivation methods: Influence on contraction stress, degree of conversion and push-out bond strength of composite restoratives
2006
Contraction stress and physical properties development of a resin-based composite irradiated using modulated curing methods at two C-factor levels
2007
A method for improving the light intensity distribution in dental light-curing units
2011
Bisphenol A and human health: A review of the literature
2013 Standout
Micro-XRD and temperature-modulated DSC investigation of nickel–titanium rotary endodontic instruments
2009
Occlusal Caries: Biological Approach for Its Diagnosis and Management
2016 Standout
Advancements in CAD/CAM technology: Options for practical implementation
2016 Standout
Water sorption/solubility of dental adhesive resins
2006 Standout
Network structures of Bis-GMA/TEGDMA resins differ in DC, shrinkage-strain, hardness and optical properties as a function of reducing agent
2011
Effect of delivering light in specific narrow bandwidths from 394 to 515 nm on the micro-hardness of resin composites
2009
Mineral Trioxide Aggregate: A Comprehensive Literature Review—Part III: Clinical Applications, Drawbacks, and Mechanism of Action
2010 Standout
Volume contraction in photocured dental resins: The shrinkage-conversion relationship revisited
2005
In vitro comparison of mechanical properties and degree of cure of bulk fill composites
2012
Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types
2010
Synthesis, characterization and application of Ag doped ZnO nanoparticles in a composite resin
2018
Resin composite—State of the art
2010 Standout
Influence of silver nanoparticle solution on the mechanical properties of resin cements and intrarradicular dentin
2019
Is the soft-start polymerisation concept still relevant for modern curing units?
2009
Two-step curing: influence on conversion and softening of a dental polymer
2003
A review on the wettability of dental implant surfaces II: Biological and clinical aspects
2014 Standout
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Dual antibacterial agents of nano‐silver and 12‐methacryloyloxydodecylpyridinium bromide in dental adhesive to inhibit caries
2013
An overview of application of silver nanoparticles for biomaterials in dentistry
2018 Standout
<p>The Antibacterial Mechanism of Silver Nanoparticles and Its Application in Dentistry</p>
2020 Standout
Influence of selected components on crosslink density in polymer structures
2001
Use of Mineral Trioxide Aggregate in the Treatment of Horizontal Root Fractures with a 5-Year Follow-up: Report of a Case
2008
Properties of Hybrid Resin Composite Systems Containing Prepolymerized Filler Particles
2009
Surface texture and roughness of polished nanofill and nanohybrid resin composites
2010
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Determination of the optimal photoinitiator concentration in dental composites based on essential material properties
2009
Influence of composition on rate of polymerization contraction of light-curing resin composites
2002
Placing Dental Composites—A Stressful Experience
2008
Polymerization shrinkage and contraction stress of dental resin composites
2005 Standout
Synthesis and characterization of novel dimethacrylates of different chain lengths as possible dental resins
2010
Polymerization shrinkage kinetics of dimethacrylate resin-cements
2009
Two-body wear of dental restorative materials
2010
Light transmission on dental resin composites
2007
Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering
2012
Multiple correlations of material parameters of light-cured dental composites
2009
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Review of titanium surface modification techniques and coatings for antibacterial applications
2018 Standout
Extraction and application of keratin from natural resources: a review
2021 Standout
Influence of curing protocol on selected properties of light-curing polymers: Degree of conversion, volume contraction, elastic modulus, and glass transition temperature
2009
Effects of different photo-polymerization protocols on resin–dentine μTBS, mechanical properties and cross-link density of a nano-filled resin composite
2012
Contraction stress of low-shrinkage composite materials assessed with different testing systems
2010
Current Challenges and Concepts of the Thermomechanical Treatment of Nickel-Titanium Instruments
2013 Standout
Durability of resin composite restorations in high C-factor cavities: A 12-year follow-up
2010
Calcium and phosphate ion releasing composite: Effect of pH on release and mechanical properties
2008
Self-adhesive resin cements - chemistry, properties and clinical considerations
2010 Standout
Photoinitiation chemistry affects light transmission and degree of conversion of curing experimental dental resin composites
2006
BisGMA/TEGDMA ratio and filler content effects on shrinkage stress
2011
Effect of Finishing/Polishing Systems on the Surface Roughness of Novel Posterior Composites
2010
Longevity of posterior composite restorations: Not only a matter of materials
2011 Standout
High-energy ball milling
2010 Standout
Dental Composites Based on Amorphous Calcium Phosphate — Resin Composition/Physicochemical Properties Study
2007
Dental Composite Restorations and Psychosocial Function in Children
2012
Strong Nanocomposites with Ca, PO4, and F Release for Caries Inhibition
2009
Alternatives in Polymerization Contraction Stress Management
2004
Aspects of the physical chemistry of polymers, biomaterials and mineralised tissues investigated with atomic force microscopy (AFM)
2000
Longevity of Posterior Composite Restorations
2014 Standout
Flexural strength and hardness of direct and indirect composites
2009
Degradable biomaterials based on magnesium corrosion
2008 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Bacterial adhesion mechanisms on dental implant surfaces and the influencing factors
2016
ADDITIVE MANUFACTURING TECHNOLOGY APPLICATIONS TARGETING PRACTICAL SURGERY
2013
Novel Bioactive and Therapeutic Dental Polymeric Materials to Inhibit Periodontal Pathogens and Biofilms
2019
A Survey of Control Issues in Nanopositioning
2007 Standout
AFM and SEM characterization of non-toxic vanadium-free Ti alloys used as biomaterials
2003
Factors affecting the energy delivered to simulated class I and class v preparations.
2010
Volumetric additive manufacturing via tomographic reconstruction
2019 StandoutScience
Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins
2002
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Novel Zirconia Materials in Dentistry
2017 Standout
Biomimetic Aspects of Restorative Dentistry Biomaterials
2020
Molecular Toxicology of Substances Released from Resin–Based Dental Restorative Materials
2009
Sodium hypochlorite alterations of dentin and dentin collagen
2001
Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications
2016 Standout
Recent Advances and Developments in Composite Dental Restorative Materials
2010
Effect of microscale shear stresses on the martensitic phase transformation of nanocrystalline tetragonal zirconia powders
2010
Two-photon polymerization: investigation of chemical and mechanical properties of resins using Raman microspectroscopy
2014
Microtensile Bond Strength of Lithium Disilicate to Zirconia with the CAD‐on Technique
2015
Photopolymerization upon LEDs: new photoinitiating systems and strategies
2015
Preparation and Characterization of Low Polymerization Shrinkage and Bis‐GMA‐Free Dental Resin System
2015
Zirconia dental implants: where are we now, and where are we heading?
2016
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Material process development for the fabrication of heterogeneous titanium structures with selective pore morphology by a hybrid additive manufacturing process
2017
Clinical effectiveness of direct class II restorations - a meta-analysis.
2012
The Mechanical Properties of Human Dentin: a Critical Review and Re-evaluation of the Dental Literature
2003 Standout
Works of Nick Silikas being referenced
Edge-strength of flowable resin-composites
2008
Effect of New Obturating Materials on Vertical Root Fracture Resistance of Endodontically Treated Teeth
2007
Experimental and FE shear-bonding strength at core/veneer interfaces in bilayered ceramics
2011
Effect of filler size and shape on local nanoindentation modulus of resin-composites
2008
Effectiveness of self-adhesive luting cements in bonding to chlorhexidine-treated dentin
2011
Colour-stability and gloss-retention of silorane and dimethacrylate composites with accelerated aging
2008
Edge strength of resin-composite margins
2007
Evaluation of UDMA's potential as a substitute for Bis-GMA in orthodontic adhesives
2013
Academy of Dental Materials guidance—Resin composites: Part I—Mechanical properties
2017
Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM)
1999
Rheology of urethane dimethacrylate and diluent formulations
1999
Surface characterization of zirconia dental implants
2009
Shrinkage behaviour of flowable resin-composites related to conversion and filler-fraction
2007
Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations
2004
Light intensity effects on resin-composite degree of conversion and shrinkage strain
2000 Standout
3D-marginal adaptation versus setting shrinkage in light-cured microhybrid resin composites
2006
Shrinkage Stresses Generated during Resin-Composite Applications: A Review
2009
In‐depth hardness profiles of Stainless Steel and Ni‐Ti endodontic instrument cross‐sections by nano‐indentation
2008
A mathematical model for simulating the bone remodeling process under mechanical stimulus
2006
In vitro characterization of two laboratory-processed resin composites
2003
Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles
2010
In vitro pulp chamber temperature rise from irradiation and exotherm of flowable composites
2008
Degradation resistance of ormocer- and dimethacrylate-based matrices with different filler contents
2011
Curing efficiency of high-intensity light-emitting diode (LED) devices
2010
Correlation of filler content and elastic properties of resin-composites
2007
Effect of nanofillers' size on surface properties after toothbrush abrasion.
2009
Surface characterization of modern resin composites: a multitechnique approach.
2005
AFM and SEM study of the effects of etching on IPS-Empress 2TM dental ceramic
2001
Effect of the Composition of CAD/CAM Composite Blocks on Mechanical Properties
2018
Surface characterization of SLActive dental implants.
2012