Citation Impact
Citing Papers
A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals
1987
High tensile ductility in a nanostructured metal
2002 StandoutNature
Crystallographic features of lath martensite in low-carbon steel
2006 Standout
Recent developments in stainless steels
2009 Standout
Deformation behavior and plastic instabilities of ultrafine-grained titanium
2001
The morphology and crystallography of lath martensite in Fe-C alloys
2003 Standout
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation
2009
Effect of an electric field on the plastic deformation kinetics of electrodeposited Cu at low and intermediate temperatures
2002
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
The dependence of polycrystal work hardening on grain size
1973
Grain-size dependence of the flow stress of Cu from millimeters to nanometers
2004
Grain size dependence of the plastic deformation kinetics in Cu
2002
Effects of metal characteristics and experimental conditions on dislocation self-organization
2004
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
The effect of solute on discontinuous dynamic recrystallization
2012
Flow stress and microstructural evolution during hot working of alloy 22cr-13ni-5mn-0.3n austenitic stainless steel
1996
The plastic deformation of polycrystals I. Aluminium between room temperature and 400°C
1983
Computational modelling of impact damage in brittle materials
1996 Standout
Microstructure and Mechanical Properties of Austenitic Stainless Steels after Dynamic and Post‐Dynamic Recrystallization Treatment
2018
Hardening evolution of AZ31B Mg sheet
2006 Standout
The stored energy of cold work
1973
Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys
2000 Standout
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Plastic flow and dislocation structure at small strains in OFHC copper deformed in tension, torsion and combined tension-torsion
1974
Effect of block size on the strength of lath martensite in low carbon steels
2006 Standout
On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy
2009 Standout
The type of dislocation interaction as the factor determining work hardening
1980
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Forward and reverse rearrangements of dislocations in tangled walls
1986
Martensite in steel: strength and structure
1999 Standout
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Grain-size strengthening in terms of dislocation density measured by resistivity
1991
Steels for bearings
2011 Standout
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
A Monte Carlo study of influence of deformation temperature on dynamic recrystallization
1995
Shear localization and recrystallization in dynamic deformation of 8090 Al–Li alloy
2001
Nonconvex energy minimization and dislocation structures in ductile single crystals
1999
Cold deformation microstructures
1990
Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals
2011
Kinetics of flow and strain-hardening
1981 Standout
Microstructural analysis by high-voltage electron diffraction of severely drawn iron wires
1975
Stress-substructure relationships in cyclically and monotonically deformed wavy slip mode metals
1982
Evolution of dislocation density distributions in copper during tensile deformation
2013
Hall–Petch relation and boundary strengthening
2004 Standout
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
On the measurement of local strain and temperature during the formation of adiabatic shear bands
1992
The effect of structure on the deformation of as-quenched and tempered martensite in an Fe-0.2 pct C alloy
1976
Finite element analyses of shear localization in rate and temperature dependent solids
1986
The theory of dislocation-based crystal plasticity
1999
Equal channel angular extrusion of difficult-to-work alloys
2000
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Long-range internal stresses and asymmetric X-ray line-broadening in tensile-deformed [001]-orientated copper single crystals
1986
Yielding in nickel as a function of grain or cell size
1975
Theory of plastic deformation: - properties of low energy dislocation structures
1989
Bulk nanostructured materials from severe plastic deformation
2000 Standout
Theory of workhardening 1934-1984
1985
Q: Dislocations structures — how far from equilibrium? A: Very close indeed
2001
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Theory of dislocation cell sizes in deformed metals
1982
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Fundamental investigations on the spark plasma sintering/synthesis process
2004 Standout
The influence of substructure on the elevated and room temperature strength of a 26 Cr-1 Mo ferritic stainless steel
1982
Polycrystalline strengthening
1985
Effect of electric current pulses on fatigue characteristics of polycrystalline copper
1991
Workability of commercial-purity titanium and 4340 steel during equal channel angular extrusion at cold-working temperatures
1999
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress
1999 Standout
Overview no. 49
1986 Standout
Cyclic deformation and fatigue properties of very fine-grained metals and alloys
2009
Current issues in recrystallization: a review
1997 Standout
Fatigue, an everlasting materials problem - still en vogue
2010
Cyclic softening of ultrafine grain copper
1998
Versetzungsstruktur und verfestigung von [100]-kupfereinkristallen
1973
Development of nanocrystalline structure in Cu during friction stir processing (FSP)
2011
A unified approach to grain boundary sliding in creep and superplasticity
1994
Influence of changing strain rate on microstructure during hot deformation
1987
Works of M.R. Staker being referenced
The effects of strain, strain rate and temperature on grain refinement and hot workability of type 305 stainless steel
1985
The dislocation cell size and dislocation density in copper deformed at temperatures between 25 and 700°C
1972
Plastic instability and flow localization in shear at high rates of deformation
1984
The relation between adiabatic shear instability strain and material properties
1981