Citation Impact
Citing Papers
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting
2013
LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales
2021 Standout
Shape Memory Behavior of Ti–22Nb–(0.5–2.0)O(at%) Biomedical Alloys
2005
Effect of Boron Concentration on Martensitic Transformation Temperatures, Stress for Inducing Martensite and Slip Stress of Ti-24 mol%Nb-3 mol%Al Superelastic Alloy
2007
Mechanical Properties and Shape Memory Behavior of Ti-Mo-Ga Alloys
2004
Mechanical Properties and Shape Memory Behavior of Ti-Nb Alloys
2004
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Development of new metallic alloys for biomedical applications
2012 Standout
Design of a New Biocompatible Ti-Based Shape Memory Alloy and Its Superelastic Deformation Behaviour
2010
Texture and microtexture variations in a near-α titanium forged disk of bimodal microstructure
2012
Texture and shape memory behavior of Ti–22Nb–6Ta alloy
2005
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Crystal plasticity simulations of fretting of Ti-6Al-4V in partial slip regime considering effects of texture
2007
A review of shape memory alloy research, applications and opportunities
2013 Standout
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Mechanisms of nanostructure and metastable phase formations in the surface melted layers of a HCPEB-treated D2 steel
2006
Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium
2005
On the design of new β-metastable titanium alloys with improved work hardening rate thanks to simultaneous TRIP and TWIP effects
2012
Improvements in the Superelasticity and Change in Deformation Mode of β-Type TiNb24Zr2 Alloys Caused by Aging Treatments
2011
Influence of the β crystalline phase on the mechanical properties of unfilled and CaCO 3 -filled polypropylene. I. Structural and mechanical characterisation
2001
Fretting modelling with a crystal plasticity model of Ti6Al4V
2006
Processing, Structure, Texture and Microtexture in Titanium Alloys
2012
A three-dimensional crystal plasticity model for duplex Ti–6Al–4V
2007
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Newly emerging applications of halloysite nanotubes: a review
2010 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Improved in vitro corrosion resistance of a NiTi alloy by high current pulsed electron beam treatment
2006
Twinning and the ductility of magnesium alloys
2006
Deformation twinning
1995 Standout
Martensitic transformation, shape memory effect and superelasticity of Ti–Nb binary alloys
2006
Hardening evolution of AZ31B Mg sheet
2006 Standout
Local texture and fatigue crack initiation in a Ti‐6Al‐4V titanium alloy
2002
Roles of microstructure in fatigue crack initiation
2009 Standout
Modelling and design of stress-induced martensite formation in metastable β
2013
Quantitative Atomic Force Microscopy Characterization and Crystal Plasticity Finite Element Modeling of Heterogeneous Deformation in Commercial Purity Titanium
2010
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Plasticity of initially textured hexagonal polycrystals at high homologous temperatures: application to titanium
2002
Development and characterization of Ni-free Ti-base shape memory and superelastic alloys
2006
Investigation of early stage deformation mechanisms in a metastable β titanium alloy showing combined twinning-induced plasticity and transformation-induced plasticity effects
2013
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
1993 Standout
Aging response of the young’s modulus and mechanical properties of Ti-29Nb-13Ta-4.6Zr for biomedical applications
2003
On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
2010 Standout
Nonbasal deformation modes of HCP metals and alloys: Role of dislocation source and mobility
2002
Isothermal α″ formation in β metastable titanium alloys
2012
Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti-10V-2Fe-3Al
2006
The characterization of shape memory effect for low elastic modulus biomedical β-type titanium alloy
2010
Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature
2005
Mechanical properties of alloys consisting of two ductile phases
2006
Shape memory characteristics of Ti–22Nb–(2–8)Zr(at.%) biomedical alloys
2005
The origins of heterogeneous deformation during primary hot working of Ti–6Al–4V
2002
Processing nanocrystalline Ti and its nanocomposites from micrometer-sized Ti powder using high pressure torsion
2000
Perspectives on Titanium Science and Technology
2013 Standout
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
An experimental and theoretical investigation of the effect of local colony orientations and misorientation on cavitation during hot working of Ti-6Al-4V
2005
Development and exploration of refractory high entropy alloys—A review
2018 Standout
Anisotropy of the hot plastic deformation of Ti–6Al–4V single-colony samples
2008
Nonbasal deformation modes of HCP metals and alloys: Role of dislocation source and mobility
2002
Realization of high tensile ductility in a bulk metallic glass composite by the utilization of deformation-induced martensitic transformation
2011
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
Shape memory properties of Ti–Nb–Mo biomedical alloys
2010
The influence of grain size and texture on the mechanical response of high purity hafnium
2007
Evolution of texture during thermomechanical processing of titanium and its alloys
2008
Experimental Characterization and Crystal Plasticity Modeling of Heterogeneous Deformation in Polycrystalline α-Ti
2010
Relationships between tensile deformation behavior and microstructure in Ti–Nb–Ta–Zr system alloys
2005
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Metallic implant biomaterials
2014 Standout
Microstructure-based crystal plasticity modeling of cyclic deformation of Ti–6Al–4V
2007
The onset of twinning in metals: a constitutive description
2001 Standout
Classical atomistic simulations of surfaces and heterogeneous interfaces with the charge-optimized many body (COMB) potentials
2013
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
2004 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Mechanisms of structural evolutions associated with the high current pulsed electron beam treatment of a NiTi shape memory alloy
2006
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Texture modification, grain refinement and improved hardness/corrosion balance of a FeAl alloy by pulsed electron beam surface treatment in the “heating mode”
2008 Standout
Mechanics of superelasticity in Ti–30Nb–(8–10)Ta–5Zr alloy
2010
Strain hardening due to deformation twinning in α-titanium: Constitutive relations and crystal-plasticity modeling
2005
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
2001
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
Texture evolution in vacuum arc remelted ingots of Ti-6Al-4V
2003
Thermomechanical response of 3D laser-deposited Ti–6Al–4V alloy over a wide range of strain rates and temperatures
2015
Using ab initio calculations in designing bcc Mg–Li alloys for ultra-lightweight applications
2008
Texture and anisotropy
2004
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Observations and issues on mechanisms of grain refinement during ECAP process
2000
A model for texture development dominated by deformation twinning: Application to zirconium alloys
1991
Development of Microstructure and Crystallographic Texture during Stationary Shoulder Friction Stir Welding of Ti-6Al-4V
2011
Misorientation dependence of the energy of symmetrical tilt boundaries in hcp metals: prediction by the disclination-structural unit model
2004
The effect of oxygen on α″ martensite and superelasticity in Ti–24Nb–4Zr–8Sn
2010
In situ X-ray analysis of mechanism of nonlinear super elastic behavior of Ti–Nb–Ta–Zr system beta-type titanium alloy for biomedical applications
2007
Additive manufacturing of metals
2016 Standout
The effect of oxygen and stress state on the yield behavior of commercially pure titanium
2012
Deformation twinning in h.c.p. metals and alloys
1991
Works of M.J. Philippe being referenced
Microstructure transformation and stress‐strain behavior of isotactic polypropylene under large plastic deformation
1997
Deformation induced martensite and superelasticity in a β-metastable titanium alloy
2000
Role of Twinning in Texture Development and in Plastic Deformation of Hexagonal Materials
1987
The influence of the amorphous matrix on the plastic hardening at large strain of semicrystalline polymers
1999
Mécanismes de déformation et propriétés mécaniques de l’alliage de titane Ti-6Al-4V dans la gamme de température 25-800°C
1999
Modelling and prediction of mechanical properties for materials with hexagonal symmetry (zinc, titanium and zirconium alloys)
1997
Influence of the microstructure on the pseudoelasticity of a metastable beta titanium alloy
2005
Modelling of texture evolution for materials of hexagonal symmetry—II. application to zirconium and titanium α or near α alloys
1995
Modeling of the texture transformation in a Ti-64 sheet after hot compression
1997
Evaluation of the high temperature texture of the β phase of a TA6V sample from the individual orientations of grains of the low temperature α phase
1994
Modelling of texture evolution for materials of hexagonal symmetry—I. Application to zinc alloys
1994
Investigation of the α- and β- texture evolution of hot rolled Ti-64 products
1996
Textures and Anisotropy of Titanium Alloys
1998
Effect of microstructure variations on the formation of deformation-induced martensite and associated tensile properties in a β metastable Ti alloy
2000
Mechanical twinning at high temperatures in some hexagonal alloys
1990
Study of the β-α phase transformations of a Ti-64 sheet induced from a high-temperature β state and a high-temperature α + β state
1997
Modeling the transformation texture of Ti-64 sheets after rolling in the β-field
1997
Classification of the critical resolved shear stress in the hexagonal-close-packed materials by atomic simulation: Application to α-zirconium and α-titanium
2011
Texture Formation in Hexagonal Materials
1994
Evaluation of the High Temperature ß Texture of a Sample of TA6V from Individual Orientation Measurements of Plates of the α Phase at Room Temperature
1994