Citation Impact
Citing Papers
Cells lying on a bed of microneedles: An approach to isolate mechanical force
2003 Standout
Tough adhesives for diverse wet surfaces
2017 StandoutScience
Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling
2005
Targeting microbial biofilms: current and prospective therapeutic strategies
2017 Standout
Dental materials: 1996 literature review. Part 2
1998
Restoring cervical lesions with flexible composites
2006
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity
2005 Standout
A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics
2011 Standout
Bonding of resin cements to an aluminous ceramic: A new surface treatment
1994
Solvent-induced dimensional changes in EDTA-demineralized dentin matrix
2001
Bioinspired Super‐Wettability from Fundamental Research to Practical Applications
2015
Advancing dental implant surface technology – From micron- to nanotopography
2008 Standout
A Novel Superhydrophilic and Underwater Superoleophobic Hydrogel‐Coated Mesh for Oil/Water Separation
2011 Standout
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
2006 Standout
Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance
2012 Standout
The effect of mean pore size on cell attachment, proliferation and migration in collagen–glycosaminoglycan scaffolds for bone tissue engineering
2009 Standout
Resin composite—State of the art
2010 Standout
High surface energy enhances cell response to titanium substrate microstructure
2005
Clinical long-term retention of etch-and-rinse and self-etch adhesive systems in non-carious cervical lesions
2006
Effects of synthetic micro- and nano-structured surfaces on cell behavior
1999
Comparison of osteoblast responses to hydroxyapatite and hydroxyapatite/soluble calcium phosphate composites
2004
Marginal adaptation in vitro and clinical outcome of Class V restorations
2009
A review on the wettability of dental implant surfaces II: Biological and clinical aspects
2014 Standout
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Porosity of 3D biomaterial scaffolds and osteogenesis
2005 Standout
Immediate repair bond strengths of microhybrid, nanohybrid and nanofilled composites after different surface treatments
2009
Effect of surface roughness of the titanium alloy Ti–6Al–4V on human bone marrow cell response and on protein adsorption
2001
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
2002 Standout
Relation between water content in acetone/alcohol-based primer and interfacial ultrastructure
1998
Silk as a biomaterial
2007 Standout
Long-term bond between dual-polymerizing cementing agents and human hard dental tissue
2006
Strategies in the design of nanoparticles for therapeutic applications
2010 Standout
Dry double-sided tape for adhesion of wet tissues and devices
2019 StandoutNature
A review of the biomaterials technologies for infection-resistant surfaces
2013 Standout
Stickiness of dental resin composite materials to steel, dentin and bonded dentin
2009
Direct comparison of the bond strength results of the different test methods: A critical literature review
2010
Studies on nerve cell affinity of chitosan-derived materials
2000
Water absorption of poly(methyl methacrylate) containing 4-methacryloxyethyl trimellitic anhydride
2003
Roughness induced dynamic changes of wettability of acid etched titanium implant modifications
2003
Effects of the Chemical Structure and the Surface Properties of Polymeric Biomaterials on Their Biocompatibility
2004
Surface modification of 3D-printed porous scaffolds via mussel-inspired polydopamine and effective immobilization of rhBMP-2 to promote osteogenic differentiation for bone tissue engineering
2016
Synthesis methods for nanosized hydroxyapatite with diverse structures
2013 Standout
Surface treatments of titanium dental implants for rapid osseointegration
2006 Standout
Engineered hybrid cardiac patches with multifunctional electronics for online monitoring and regulation of tissue function
2016
Electrospinning: A fascinating fiber fabrication technique
2010 Standout
Relationship between bond-strength tests and clinical outcomes
2009 Standout
Osteoblast adhesion on biomaterials
2000 Standout
A biodegradable and biocompatible PVA–citric acid polyester with potential applications as matrix for vascular tissue engineering
2008
Emerging applications of stimuli-responsive polymer materials
2010 Standout
Electrospinning: Applications in drug delivery and tissue engineering
2008 Standout
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
2007 Standout
Poly(d,l-lactic acid) surfaces modified by silk fibroin: effects on the culture of osteoblast in vitro
2002
Applications of Bio‐Inspired Special Wettable Surfaces
2010
Self-adhesive resin cements - chemistry, properties and clinical considerations
2010 Standout
Dental luting agents: A review of the current literature
1998 Standout
Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms
2010 Standout
A preliminary study on osteoinduction of two kinds of calcium phosphate ceramics
1999
Bioinspired structural materials
2014 Standout
Patterned Hydrogels for Controlled Platelet Adhesion from Whole Blood and Plasma
2010 StandoutNobel
Surface hydration: Principles and applications toward low-fouling/nonfouling biomaterials
2010 Standout
Hydrolytic Stability of Self-etch Adhesives Bonded to Dentin
2005
Automatic gap detection at restoration margins with an optical sensor in vitro.
2005
In vitro study of human vascular endothelial cell function on materials with various surface roughness
2004
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
Bio-Inspired Strategies for Anti-Icing
2014 Standout
Supramolecular Hydrogelators and Hydrogels: From Soft Matter to Molecular Biomaterials
2015 Standout
Effect of chemical composition on hydrophobicity and zeta potential of plasma sprayed HA/CaO–P2O5 glass coatings
2001
Secondary stability assessment of titanium implants with an alkali-etched surface: a resonance frequency analysis study in beagle dogs.
2008
Four-point bending evaluation of dentin-composite interfaces with various stresses.
2008
Aligned PLLA nanofibrous scaffolds coated with graphene oxide for promoting neural cell growth
2016
Microleakage of various cementing agents for full cast crowns
2004
3D Biofabrication Strategies for Tissue Engineering and Regenerative Medicine
2014
Chitosan—A versatile semi-synthetic polymer in biomedical applications
2011 Standout
Low Adhesive Surfaces that Adapt to Changing Environments
2009
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
2015 Standout
Non-linear and non-local transport processes in heterogeneous media: from long-range correlated percolation to fracture and materials breakdown
1998
Bulk metallic glasses
2004 Standout
Bone repair in the twenty–first century: biology, chemistry or engineering?
2004
New polymer‐chemical developments in clinical dental polymer materials: Enamel–dentin adhesives and restorative composites
2012
Current Concepts On Adhesion To Dentin
1997
Hydroxyapatite extracted from fish scale: Effects on MG63 osteoblast-like cells
2011
Effect of a controlled volume fraction of dendritic phases on tensile and compressive ductility in La-based metallic glass matrix composites
2004 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results
2005 Standout
Polydopamine Surface Chemistry: A Decade of Discovery
2018 Standout
Wettability of Supramolecular Nanofibers for Controlled Cell Adhesion and Proliferation
2013
The effect of material characteristics, of surface topography and of implant components and connections on soft tissue integration: a literature review
2006
Metallic implant biomaterials
2014 Standout
Characterization of neural stem cells on electrospun poly(L-lactic acid) nanofibrous scaffold
2004
Adhesion and Viability of Two Enterococcal Strains on Covalently Grafted Chitosan and Chitosan/κ-Carrageenan Multilayers
2007
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers.
2003
Microstructures and properties of high-entropy alloys
2013 Standout
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
2012 StandoutScience
Mechanical behavior of amorphous alloys
2007 Standout
Noneluting Enzymatic Antibiofilm Coatings
2012
Shear vs. Tensile Bond Strength of Resin Composite Bonded to Ceramic
1995
The random walk's guide to anomalous diffusion: a fractional dynamics approach
2000 Standout
Mechanical properties of Zr57Nb5Al10Cu15.4Ni12.6 metallic glass matrix particulate composites
1999
Evaluation of the Stability of Nonfouling Ultrathin Poly(ethylene glycol) Films for Silicon-Based Microdevices
2003
Works of Michel Degrange being referenced
Bonding of resin cements to a metal substrate: influence of pretreatment on the adherence energy
1996
Bonding of luting materials for resinbonded bridges: clinical relevance of in vitro tests
1994
Correlation between substratum roughness and wettability, cell adhesion, and cell migration
1997
Bond strengths of nine current dentine adhesive systems to primary and permanent teeth
2005
Influence of drying and HEMA treatment on dentin wettability
2002
Adherence of resin-based luting agents assessed by the energy of fracture
1993
Influence of surface treatment on adherence energy of alloys used in bonded prosthetics
1999
Effects of surface treatment on the free surface energy of dentin
1994
Water resistance of resin-bonded joints with time related to alloy surface treatment
1999
Synthesis and evaluation of new phosphonic, bisphosphonic and difluoromethylphosphonic acid monomers for dental application
2011
Reliability of in vitro microleakage tests: a literature review.
2001
Fractal Characteristics of Fracture Surfaces
1992
Influence of the number of sections on reliability of in vitro microleakage evaluations.
2003
Synthesis, photopolymerization, and adhesive properties of new bisphosphonic acid monomers for dental application
2009
Concise Review Biomaterials & Bioengineering: Meta-analytical Review of Factors Involved in Dentin Adherence
2001
Bonding to dentin achieved by general practitioners.
2002
Factors Affecting the Adherence Energy of Experimental Resin Cements Bonded to a Nickel-Chromium Alloy
1995
Fracture toughness of metal reinforced glass composites
1990
Synthesis, photopolymerization and adhesive properties of new hydrolytically stable phosphonic acids for dental applications
2008